coreutils/gl/modules, branch v8.26

all: replace most uses of quotearg_colon() with quote()

2015-11-04T02:03:41Z

Related to commit v8.24-61-g6796698 this provides more consistent quoting, as quotearg_colon() defaults to "literal" quoting by default, while quote() provides appropriate quoting for diagnostics by default. * gl/modules/randread: Depend on quote module rather than quotearg. * gl/lib/randread.c: Used quote() not quotearg_colon(). * src/: Likewise. * src/shred.c: Likewise. Also avoid unnecessary quoting introducing overhead when wiping names. * cfg.mk: Relax the matching expression to allow "qname" variables as used in shred.c to satisfy the check. * tests/: Adjust accordingly.

build: update to latest gnulib

2015-02-11T03:58:55Z

This includes a change to require --with-libmount to be used with configure, due to the many libmount dependencies. * bootstrap: Sync with gnulib to exit early on gnulib-tool error. * gl/lib/tempname.c.diff: Adjust for gnulib changes. * gl/lib/tempname.h.diff: Likewise. * gl/modules/tempname: Likewise. * doc/.gitignore: Add new gendocs_template_min gnulib script.

diagnose too-large numbers better

2014-12-19T11:56:20Z

Following on from commit v8.23-82-gaddae94, consistently diagnose numbers that are too large, so as to distinguish from other errors, and make the limits obvious. * gl/modules/xdectoint: A new module implementing xdecto[iu]max(), which handles the common case of parsing a bounded integer and exiting with a diagnostic on error. * gl/lib/xdectoimax.c: The signed variant. * gl/lib/xdectoint.c: The parameterized implementation. * gl/lib/xdectoint.h: The interface. * gl/lib/xdectoumax.c: The unsigned variant. * bootstrap.conf: Reference the new module. * cfg.mk (exclude_file_name_regexp--sc_require_config_h_first): Exclude the parameterized templates. * src/csplit.c: Output EOVERFLOW or ERANGE errors if appropriate. * src/fmt.c: Likewise. * src/fold.c: Likewise. * src/head.c: Likewise. * src/ls.c: Likewise. * src/nl.c: Likewise. * src/nproc.c: Likewise. * src/shred.c: Likewise. * src/shuf.c: Likewise. * src/stdbuf.c: Likewise. * src/stty.c: Likewise. * src/tail.c: Likewise. * src/truncate.c: Likewise. * src/split.c: Likewise. * src/pr.c: Likewise. * tests/pr/pr-tests.pl: Adjust to avoid matching errno diagnostic. * tests/fmt/base.pl: Likewise. * tests/split/l-chunk.sh: Likewise. * tests/misc/shred-negative.sh: Likewise. * tests/misc/tail.pl: Likewise. Also remove the redundant existing ERR_SUBST from test err-6. * tests/ls/hex-option.sh: Check HEX/OCT options. * tests/misc/shred-size.sh: Likewise. * tests/misc/stty-row-col.sh: Likewise.

build: fix corrupted patch causing bootstrap failures

2013-09-10T11:00:34Z

The patch was corrupted in commit v8.21-50-g7b65f8e * gl/modules/tempname.diff: Fix the offsets so that the patch applies cleanly. Note that this was only apparent with patch < 2.6. With patch >= 2.6, patch will not indicate an error applying the second hunk of the patch and silently ignore it. I double checked that all patches now apply cleanly by adjusting gnulib-tool to run patch with --fuzz=0 which might be advisable going forward, even on a per project basis. The silent ignoring of hunks by newer patch(1) has been reported. Fixes http://bugs.gnu.org/15255

maint: refactor SMACK interface to a separate module

2013-07-02T08:47:32Z

Consolidate all smack routines and checks in a module. We replace and wrap the most commonly used smack routines, which allows removing ifdefs throughout the code. * gl/lib/smack.h: A new header containing the implementation of the wrapped and replacement routines. Note the is_smack_enabled() routine should be optimized out at compile time when compiled on a system without libsmack. * gl/modules/smack: Describe the new module and move the configure time code here from ... * m4/jm-macros.m4: ... here. * bootstrap.conf: Reference the new module. * src/id.c: Use the routines without ifdefs where possible. * src/ls.c: Likewise. * src/mkdir.c: Likewise. * src/mkfifo.c: Likewise. * src/mknod.c: Likewise.

build: update gnulib submodule to latest

2013-05-12T02:22:54Z

build: move non-recursive-gnulib-prefix-hack to gnulib; update

2012-09-20T15:47:32Z

I've moved the non-recursive-gnulib-prefix-hack module to gnulib, with two small improvements, so remove it from here and update gnulib to the latest. * gl/build-aux/prefix-gnulib-mk: Remove file. * gl/m4/non-recursive-gnulib-prefix-hack.m4: Remove file. * gl/modules/non-recursive-gnulib-prefix-hack: Remove file. * gnulib: Update to latest.

build: new module to convert lib/ to non-recursive make

2012-09-11T09:23:00Z

* gl/modules/non-recursive-gnulib-prefix-hack: New module. * gl/m4/non-recursive-gnulib-prefix-hack.m4: (gl_NON_RECURSIVE_GNULIB_PREFIX_HACK): This is the snippet that this module inserts near the end of configure. * gl/build-aux/prefix-gnulib-mk: New script, from bison. Changes from the code in bison: (prefix_assignment): Split a long line. (prefix): Add trailing slashes to avoid a single false match. Prefix imaxtostr.c and the other *tostr.c file names manually. Also, use $prefix in place of hard-coded "lib/".

maint: move the last coreutils-specific files from lib/ to gl/

2012-09-10T06:58:03Z

Convert the few remaining coreutils-specific files in lib/ to gnulib-style modules under gl/, removing their corresponding .m4 files, since the information recorded in those files is better stored in module-description file in gl/modules/. * bootstrap.conf (gnulib_modules): Add new modules: fd-reopen, buffer-lcm, xfts, strnumcmp. * gl/lib/buffer-lcm.c: Renamed from the file in lib/. * gl/lib/buffer-lcm.h: Likewise. * gl/lib/fd-reopen.c: Likewise. * gl/lib/fd-reopen.h: Likewise. * gl/lib/strintcmp.c: Likewise. * gl/lib/strnumcmp-in.h: Likewise. * gl/lib/strnumcmp.c: Likewise. * gl/lib/strnumcmp.h: Likewise. * gl/lib/xfts.c: Likewise. * gl/lib/xfts.h: Likewise. * gl/modules/buffer-lcm: New module-description file. * gl/modules/fd-reopen: Likewise. * gl/modules/strnumcmp: Likewise. * gl/modules/xfts: Likewise. * m4/fd-reopen.m4: Remove, no longer needed. * m4/strnumcmp.m4: Likewise. * m4/xfts.m4: Likewise. * m4/prereq.m4: Do not AC_REQUIRE the m4 functions from our just-removed m4/*.m4 files.

maint: move gl/m4/root-dev-ino.m4 contents into its module definition

2012-09-10T06:56:45Z

We can get the same effect using the modules file. * gl/m4/root-dev-ino.m4: Remove file. * gl/modules/root-dev-ino (Depends-on): Add lstat. (Files): Remove m4/root-dev-ino.m4. (Makefile.am) [lib_SOURCES]: Add root-dev-ino.c and root-dev-ino.h. (configure.ac): Remove reference to gl_ROOT_DEV_INO.