git/attr.c, branch v2.33.6

Sync with Git 2.32.5

2022-12-13T12:13:11Z

Sync with Git 2.31.6

2022-12-13T12:09:40Z

Sync with Git 2.30.7

2022-12-13T12:02:20Z

attr: ignore overly large gitattributes files

2022-12-05T06:50:03Z

Similar as with the preceding commit, start ignoring gitattributes files that are overly large to protect us against out-of-bounds reads and writes caused by integer overflows. Unfortunately, we cannot just define "overly large" in terms of any preexisting limits in the codebase. Instead, we choose a very conservative limit of 100MB. This is plenty of room for specifying gitattributes, and incidentally it is also the limit for blob sizes for GitHub. While we don't want GitHub to dictate limits here, it is still sensible to use this fact for an informed decision given that it is hosting a huge set of repositories. Furthermore, over at GitLab we scanned a subset of repositories for their root-level attribute files. We found that 80% of them have a gitattributes file smaller than 100kB, 99.99% have one smaller than 1MB, and only a single repository had one that was almost 3MB in size. So enforcing a limit of 100MB seems to give us ample of headroom. With this limit in place we can be reasonably sure that there is no easy way to exploit the gitattributes file via integer overflows anymore. Furthermore, it protects us against resource exhaustion caused by allocating the in-memory data structures required to represent the parsed attributes. Signed-off-by: Patrick Steinhardt Signed-off-by: Junio C Hamano

attr: ignore attribute lines exceeding 2048 bytes

2022-12-05T06:33:07Z

There are two different code paths to read gitattributes: once via a file, and once via the index. These two paths used to behave differently because when reading attributes from a file, we used fgets(3P) with a buffer size of 2kB. Consequentially, we silently truncate line lengths when lines are longer than that and will then parse the remainder of the line as a new pattern. It goes without saying that this is entirely unexpected, but it's even worse that the behaviour depends on how the gitattributes are parsed. While this is simply wrong, the silent truncation saves us with the recently discovered vulnerabilities that can cause out-of-bound writes or reads with unreasonably long lines due to integer overflows. As the common path is to read gitattributes via the worktree file instead of via the index, we can assume that any gitattributes file that had lines longer than that is already broken anyway. So instead of lifting the limit here, we can double down on it to fix the vulnerabilities. Introduce an explicit line length limit of 2kB that is shared across all paths that read attributes and ignore any line that hits this limit while printing a warning. Signed-off-by: Patrick Steinhardt Signed-off-by: Junio C Hamano

attr: fix silently splitting up lines longer than 2048 bytes

2022-12-05T06:29:30Z

When reading attributes from a file we use fgets(3P) with a buffer size of 2048 bytes. This means that as soon as a line exceeds the buffer size we split it up into multiple parts and parse each of them as a separate pattern line. This is of course not what the user intended, and even worse the behaviour is inconsistent with how we read attributes from the index. Fix this bug by converting the code to use `strbuf_getline()` instead. This will indeed read in the whole line, which may theoretically lead to an out-of-memory situation when the gitattributes file is huge. We're about to reject any gitattributes files larger than 100MB in the next commit though, which makes this less of a concern. Signed-off-by: Patrick Steinhardt Signed-off-by: Junio C Hamano

attr: harden allocation against integer overflows

2022-12-05T06:14:16Z

When parsing an attributes line, we need to allocate an array that holds all attributes specified for the given file pattern. The calculation to determine the number of bytes that need to be allocated was prone to an overflow though when there was an unreasonable amount of attributes. Harden the allocation by instead using the `st_` helper functions that cause us to die when we hit an integer overflow. Signed-off-by: Patrick Steinhardt Signed-off-by: Junio C Hamano

attr: fix integer overflow with more than INT_MAX macros

2022-12-05T06:14:16Z

Attributes have a field that tracks the position in the `all_attrs` array they're stored inside. This field gets set via `hashmap_get_size` when adding the attribute to the global map of attributes. But while the field is of type `int`, the value returned by `hashmap_get_size` is an `unsigned int`. It can thus happen that the value overflows, where we would now dereference teh `all_attrs` array at an out-of-bounds value. We do have a sanity check for this overflow via an assert that verifies the index matches the new hashmap's size. But asserts are not a proper mechanism to detect against any such overflows as they may not in fact be compiled into production code. Fix this by using an `unsigned int` to track the index and convert the assert to a call `die()`. Reported-by: Jeff King Signed-off-by: Junio C Hamano

attr: fix out-of-bounds read with unreasonable amount of patterns

2022-12-05T06:14:16Z

The `struct attr_stack` tracks the stack of all patterns together with their attributes. When parsing a gitattributes file that has more than 2^31 such patterns though we may trigger multiple out-of-bounds reads on 64 bit platforms. This is because while the `num_matches` variable is an unsigned integer, we always use a signed integer to iterate over them. I have not been able to reproduce this issue due to memory constraints on my systems. But despite the out-of-bounds reads, the worst thing that can seemingly happen is to call free(3P) with a garbage pointer when calling `attr_stack_free()`. Fix this bug by using unsigned integers to iterate over the array. While this makes the iteration somewhat awkward when iterating in reverse, it is at least better than knowingly running into an out-of-bounds read. While at it, convert the call to `ALLOC_GROW` to use `ALLOC_GROW_BY` instead. Signed-off-by: Patrick Steinhardt Signed-off-by: Junio C Hamano

attr: fix out-of-bounds write when parsing huge number of attributes

2022-12-05T06:14:16Z

It is possible to trigger an integer overflow when parsing attribute names when there are more than 2^31 of them for a single pattern. This can either lead to us dying due to trying to request too many bytes: blob=$(perl -e 'print "f" . " a=" x 2147483649' | git hash-object -w --stdin) git update-index --add --cacheinfo 100644,$blob,.gitattributes git attr-check --all file ================================================================= ==1022==ERROR: AddressSanitizer: requested allocation size 0xfffffff800000032 (0xfffffff800001038 after adjustments for alignment, red zones etc.) exceeds maximum supported size of 0x10000000000 (thread T0) #0 0x7fd3efabf411 in __interceptor_calloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:77 #1 0x5563a0a1e3d3 in xcalloc wrapper.c:150 #2 0x5563a058d005 in parse_attr_line attr.c:384 #3 0x5563a058e661 in handle_attr_line attr.c:660 #4 0x5563a058eddb in read_attr_from_index attr.c:769 #5 0x5563a058ef12 in read_attr attr.c:797 #6 0x5563a058f24c in bootstrap_attr_stack attr.c:867 #7 0x5563a058f4a3 in prepare_attr_stack attr.c:902 #8 0x5563a05905da in collect_some_attrs attr.c:1097 #9 0x5563a059093d in git_all_attrs attr.c:1128 #10 0x5563a02f636e in check_attr builtin/check-attr.c:67 #11 0x5563a02f6c12 in cmd_check_attr builtin/check-attr.c:183 #12 0x5563a02aa993 in run_builtin git.c:466 #13 0x5563a02ab397 in handle_builtin git.c:721 #14 0x5563a02abb2b in run_argv git.c:788 #15 0x5563a02ac991 in cmd_main git.c:926 #16 0x5563a05432bd in main common-main.c:57 #17 0x7fd3ef82228f (/usr/lib/libc.so.6+0x2328f) ==1022==HINT: if you don't care about these errors you may set allocator_may_return_null=1 SUMMARY: AddressSanitizer: allocation-size-too-big /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:77 in __interceptor_calloc ==1022==ABORTING Or, much worse, it can lead to an out-of-bounds write because we underallocate and then memcpy(3P) into an array: perl -e ' print "A " . "\rh="x2000000000; print "\rh="x2000000000; print "\rh="x294967294 . "\n" ' >.gitattributes git add .gitattributes git commit -am "evil attributes" $ git clone --quiet /path/to/repo ================================================================= ==15062==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000002550 at pc 0x5555559884d5 bp 0x7fffffffbc60 sp 0x7fffffffbc58 WRITE of size 8 at 0x602000002550 thread T0 #0 0x5555559884d4 in parse_attr_line attr.c:393 #1 0x5555559884d4 in handle_attr_line attr.c:660 #2 0x555555988902 in read_attr_from_index attr.c:784 #3 0x555555988902 in read_attr_from_index attr.c:747 #4 0x555555988a1d in read_attr attr.c:800 #5 0x555555989b0c in bootstrap_attr_stack attr.c:882 #6 0x555555989b0c in prepare_attr_stack attr.c:917 #7 0x555555989b0c in collect_some_attrs attr.c:1112 #8 0x55555598b141 in git_check_attr attr.c:1126 #9 0x555555a13004 in convert_attrs convert.c:1311 #10 0x555555a95e04 in checkout_entry_ca entry.c:553 #11 0x555555d58bf6 in checkout_entry entry.h:42 #12 0x555555d58bf6 in check_updates unpack-trees.c:480 #13 0x555555d5eb55 in unpack_trees unpack-trees.c:2040 #14 0x555555785ab7 in checkout builtin/clone.c:724 #15 0x555555785ab7 in cmd_clone builtin/clone.c:1384 #16 0x55555572443c in run_builtin git.c:466 #17 0x55555572443c in handle_builtin git.c:721 #18 0x555555727872 in run_argv git.c:788 #19 0x555555727872 in cmd_main git.c:926 #20 0x555555721fa0 in main common-main.c:57 #21 0x7ffff73f1d09 in __libc_start_main ../csu/libc-start.c:308 #22 0x555555723f39 in _start (git+0x1cff39) 0x602000002552 is located 0 bytes to the right of 2-byte region [0x602000002550,0x602000002552) allocated by thread T0 here: #0 0x7ffff768c037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x555555d7fff7 in xcalloc wrapper.c:150 #2 0x55555598815f in parse_attr_line attr.c:384 #3 0x55555598815f in handle_attr_line attr.c:660 #4 0x555555988902 in read_attr_from_index attr.c:784 #5 0x555555988902 in read_attr_from_index attr.c:747 #6 0x555555988a1d in read_attr attr.c:800 #7 0x555555989b0c in bootstrap_attr_stack attr.c:882 #8 0x555555989b0c in prepare_attr_stack attr.c:917 #9 0x555555989b0c in collect_some_attrs attr.c:1112 #10 0x55555598b141 in git_check_attr attr.c:1126 #11 0x555555a13004 in convert_attrs convert.c:1311 #12 0x555555a95e04 in checkout_entry_ca entry.c:553 #13 0x555555d58bf6 in checkout_entry entry.h:42 #14 0x555555d58bf6 in check_updates unpack-trees.c:480 #15 0x555555d5eb55 in unpack_trees unpack-trees.c:2040 #16 0x555555785ab7 in checkout builtin/clone.c:724 #17 0x555555785ab7 in cmd_clone builtin/clone.c:1384 #18 0x55555572443c in run_builtin git.c:466 #19 0x55555572443c in handle_builtin git.c:721 #20 0x555555727872 in run_argv git.c:788 #21 0x555555727872 in cmd_main git.c:926 #22 0x555555721fa0 in main common-main.c:57 #23 0x7ffff73f1d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: heap-buffer-overflow attr.c:393 in parse_attr_line Shadow bytes around the buggy address: 0x0c047fff8450: fa fa 00 02 fa fa 00 07 fa fa fd fd fa fa 00 00 0x0c047fff8460: fa fa 02 fa fa fa fd fd fa fa 00 06 fa fa 05 fa 0x0c047fff8470: fa fa fd fd fa fa 00 02 fa fa 06 fa fa fa 05 fa 0x0c047fff8480: fa fa 07 fa fa fa fd fd fa fa 00 01 fa fa 00 02 0x0c047fff8490: fa fa 00 03 fa fa 00 fa fa fa 00 01 fa fa 00 03 =>0x0c047fff84a0: fa fa 00 01 fa fa 00 02 fa fa[02]fa fa fa fa fa 0x0c047fff84b0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c047fff84c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c047fff84d0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c047fff84e0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c047fff84f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc ==15062==ABORTING Fix this bug by using `size_t` instead to count the number of attributes so that this value cannot reasonably overflow without running out of memory before already. Reported-by: Markus Vervier Signed-off-by: Patrick Steinhardt Signed-off-by: Junio C Hamano