git/cache.h, branch v2.22.2

Merge branch 'sg/rebase-progress' into maint

2019-07-29T19:38:19Z

Use "Erase in Line" CSI sequence that is already used in the editor support to clear cruft in the progress output. * sg/rebase-progress: progress: use term_clear_line() rebase: fix garbled progress display with '-x' pager: add a helper function to clear the last line in the terminal t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused t3404: modernize here doc style

pager: add a helper function to clear the last line in the terminal

2019-06-24T20:38:46Z

There are a couple of places where we want to clear the last line on the terminal, e.g. when a progress bar line is overwritten by a shorter line, then the end of that progress line would remain visible, unless we cover it up. In 'progress.c' we did this by always appending a fixed number of space characters to the next line (even if it was not shorter than the previous), but as it turned out that fixed number was not quite large enough, see the fix in 9f1fd84e15 (progress: clear previous progress update dynamically, 2019-04-12). From then on we've been keeping track of the length of the last displayed progress line and appending the appropriate number of space characters to the next line, if necessary, but, alas, this approach turned out to be error prone, see the fix in 1aed1a5f25 (progress: avoid empty line when breaking the progress line, 2019-05-19). The next patch in this series is about to fix a case where we don't clear the last line, and on occasion do end up with such garbage at the end of the line. It would be great if we could do that without the need to deal with that without meticulously computing the necessary number of space characters. So add a helper function to clear the last line on the terminal using an ANSI escape sequence, which has the advantage to clear the whole line no matter how wide it is, even after the terminal width changed. Such an escape sequence is not available on dumb terminals, though, so in that case fall back to simply print a whole terminal width (as reported by term_columns()) worth of space characters. In 'editor.c' launch_specified_editor() already used this ANSI escape sequence, so replace it with a call to this function. Signed-off-by: SZEDER Gábor Signed-off-by: Junio C Hamano

fill_stat_cache_info(): prepare for an fsmonitor fix

2019-05-28T19:43:42Z

We will need to pass down the `struct index_state` to `mark_fsmonitor_valid()` for an upcoming bug fix, and this here function calls that there function, so we need to extend the signature of `fill_stat_cache_info()` first. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano

Merge branch 'js/fsmonitor-refresh-after-discarding-index'

2019-05-19T07:45:33Z

The fsmonitor interface got out of sync after the in-core index file gets discarded, which has been corrected. * js/fsmonitor-refresh-after-discarding-index: fsmonitor: force a refresh after the index was discarded fsmonitor: demonstrate that it is not refreshed after discard_index()

Merge branch 'dl/no-extern-in-func-decl'

2019-05-13T14:50:32Z

Mechanically and systematically drop "extern" from function declarlation. * dl/no-extern-in-func-decl: *.[ch]: manually align parameter lists *.[ch]: remove extern from function declarations using sed *.[ch]: remove extern from function declarations using spatch

Merge branch 'nd/sha1-name-c-wo-the-repository'

2019-05-08T15:37:25Z

Further code clean-up to allow the lowest level of name-to-object mapping layer to work with a passed-in repository other than the default one. * nd/sha1-name-c-wo-the-repository: (34 commits) sha1-name.c: remove the_repo from get_oid_mb() sha1-name.c: remove the_repo from other get_oid_* sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name submodule-config.c: use repo_get_oid for reading .gitmodules sha1-name.c: add repo_get_oid() sha1-name.c: remove the_repo from get_oid_with_context_1() sha1-name.c: remove the_repo from resolve_relative_path() sha1-name.c: remove the_repo from diagnose_invalid_index_path() sha1-name.c: remove the_repo from handle_one_ref() sha1-name.c: remove the_repo from get_oid_1() sha1-name.c: remove the_repo from get_oid_basic() sha1-name.c: remove the_repo from get_describe_name() sha1-name.c: remove the_repo from get_oid_oneline() sha1-name.c: add repo_interpret_branch_name() sha1-name.c: remove the_repo from interpret_branch_mark() sha1-name.c: remove the_repo from interpret_nth_prior_checkout() sha1-name.c: remove the_repo from get_short_oid() sha1-name.c: add repo_for_each_abbrev() sha1-name.c: store and use repo in struct disambiguate_state sha1-name.c: add repo_find_unique_abbrev_r() ...

Merge branch 'en/merge-directory-renames'

2019-05-08T15:37:22Z

"git merge-recursive" backend recently learned a new heuristics to infer file movement based on how other files in the same directory moved. As this is inherently less robust heuristics than the one based on the content similarity of the file itself (rather than based on what its neighbours are doing), it sometimes gives an outcome unexpected by the end users. This has been toned down to leave the renamed paths in higher/conflicted stages in the index so that the user can examine and confirm the result. * en/merge-directory-renames: merge-recursive: switch directory rename detection default merge-recursive: give callers of handle_content_merge() access to contents merge-recursive: track information associated with directory renames t6043: fix copied test description to match its purpose merge-recursive: switch from (oid,mode) pairs to a diff_filespec merge-recursive: cleanup handle_rename_* function signatures merge-recursive: track branch where rename occurred in rename struct merge-recursive: remove ren[12]_other fields from rename_conflict_info merge-recursive: shrink rename_conflict_info merge-recursive: move some struct declarations together merge-recursive: use 'ci' for rename_conflict_info variable name merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf' merge-recursive: rename diff_filespec 'one' to 'o' merge-recursive: rename merge_options argument from 'o' to 'opt' Use 'unsigned short' for mode, like diff_filespec does

fsmonitor: force a refresh after the index was discarded

2019-05-08T03:03:48Z

With this change, the `index_state` struct becomes the new home for the flag that says whether the fsmonitor hook has been run, i.e. it is now per-index. It also gets re-set when the index is discarded, fixing the bug demonstrated by the "test_expect_failure" test added in the preceding commit. In that case fsmonitor-enabled Git would miss updates under certain circumstances, see that preceding commit for details. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano

*.[ch]: manually align parameter lists

2019-05-05T06:20:10Z

In previous patches, extern was mechanically removed from function declarations without care to formatting, causing parameter lists to be misaligned. Manually format changed sections such that the parameter lists should be realigned. Viewing this patch with 'git diff -w' should produce no output. Signed-off-by: Denton Liu Signed-off-by: Junio C Hamano

*.[ch]: remove extern from function declarations using sed

2019-05-05T06:20:08Z

There has been a push to remove extern from function declarations. Finish the job by removing all instances of "extern" for function declarations in headers using sed. This was done by running the following on my system with sed 4.2.2: $ git ls-files \*.{c,h} | grep -v ^compat/ | xargs sed -i'' -e 's/^$\s*$extern $[^(]*([^*]$/\1\2/' Files under `compat/` are intentionally excluded as some are directly copied from external sources and we should avoid churning them as much as possible. Then, leftover instances of extern were found by running $ git grep -w -C3 extern \*.{c,h} and manually checking the output. No other instances were found. Note that the regex used specifically excludes function variables which _should_ be left as extern. Not the most elegant way to do it but it gets the job done. Signed-off-by: Denton Liu Signed-off-by: Junio C Hamano