git/diff-no-index.c, branch v2.16.2

diff: make struct diff_flags members lowercase

2017-11-01T02:51:40Z

Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams Signed-off-by: Junio C Hamano

diff: remove DIFF_OPT_SET macro

2017-11-01T02:50:03Z

Remove the `DIFF_OPT_SET` macro and instead set the flags directly. This conversion is done using the following semantic patch: @@ expression E; identifier fld; @@ - DIFF_OPT_SET(&E, fld) + E.flags.fld = 1 @@ type T; T *ptr; identifier fld; @@ - DIFF_OPT_SET(ptr, fld) + ptr->flags.fld = 1 Signed-off-by: Brandon Williams Signed-off-by: Junio C Hamano

diff: remove DIFF_OPT_TST macro

2017-11-01T02:50:03Z

Remove the `DIFF_OPT_TST` macro and instead access the flags directly. This conversion is done using the following semantic patch: @@ expression E; identifier fld; @@ - DIFF_OPT_TST(&E, fld) + E.flags.fld @@ type T; T *ptr; identifier fld; @@ - DIFF_OPT_TST(ptr, fld) + ptr->flags.fld Signed-off-by: Brandon Williams Signed-off-by: Junio C Hamano

diff: convert fill_filespec to struct object_id

2017-06-02T00:36:07Z

Signed-off-by: Brandon Williams Signed-off-by: Junio C Hamano

prefix_filename: return newly allocated string

2017-03-21T18:18:41Z

The prefix_filename() function returns a pointer to static storage, which makes it easy to use dangerously. We already fixed one buggy caller in hash-object recently, and the calls in apply.c are suspicious (I didn't dig in enough to confirm that there is a bug, but we call the function once in apply_all_patches() and then again indirectly from parse_chunk()). Let's make it harder to get wrong by allocating the return value. For simplicity, we'll do this even when the prefix is empty (and we could just return the original file pointer). That will cause us to allocate sometimes when we wouldn't otherwise need to, but this function isn't called in performance critical code-paths (and it already _might_ allocate on any given call, so a caller that cares about performance is questionable anyway). The downside is that the callers need to remember to free() the result to avoid leaking. Most of them already used xstrdup() on the result, so we know they are OK. The remainder have been converted to use free() as appropriate. I considered retaining a prefix_filename_unsafe() for cases where we know the static lifetime is OK (and handling the cleanup is awkward). This is only a handful of cases, though, and it's not worth the mental energy in worrying about whether the "unsafe" variant is OK to use in any situation. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano

prefix_filename: drop length parameter

2017-03-21T18:12:53Z

This function takes the prefix as a ptr/len pair, but in every caller the length is exactly strlen(ptr). Let's simplify the interface and just take the string. This saves callers specifying it (and in some cases handling a NULL prefix). In a handful of cases we had the length already without calling strlen, so this is technically slower. But it's not likely to matter (after all, if the prefix is non-empty we'll allocate and copy it into a buffer anyway). Signed-off-by: Jeff King Signed-off-by: Junio C Hamano

diff: use SWAP macro

2017-01-30T22:23:00Z

Use the macro SWAP to exchange the value of pairs of variables instead of swapping them manually with the help of a temporary variable. The resulting code is shorter and easier to read. The two cases were not transformed by the semantic patch swap.cocci because it's extra careful and handles only cases where the types of all variables are the same -- and here we swap two ints and use an unsigned temporary variable for that. Nevertheless the conversion is safe, as the value range is preserved with and without the patch. Signed-off-by: Rene Scharfe Signed-off-by: Junio C Hamano

use SWAP macro

2017-01-30T22:17:00Z

Apply the semantic patch swap.cocci to convert hand-rolled swaps to use the macro SWAP. The resulting code is shorter and easier to read, the object code is effectively unchanged. The patch for object.c had to be hand-edited in order to preserve the comment before the change; Coccinelle tried to eat it for some reason. Signed-off-by: Rene Scharfe Signed-off-by: Junio C Hamano

Merge branch 'jk/setup-sequence-update'

2016-09-21T22:15:24Z

There were numerous corner cases in which the configuration files are read and used or not read at all depending on the directory a Git command was run, leading to inconsistent behaviour. The code to set-up repository access at the beginning of a Git process has been updated to fix them. * jk/setup-sequence-update: t1007: factor out repeated setup init: reset cached config when entering new repo init: expand comments explaining config trickery config: only read .git/config from configured repos test-config: setup git directory t1302: use "git -C" pager: handle early config pager: use callbacks instead of configset pager: make pager_program a file-local static pager: stop loading git_default_config() pager: remove obsolete comment diff: always try to set up the repository diff: handle --no-index prefixes consistently diff: skip implicit no-index check when given --no-index patch-id: use RUN_SETUP_GENTLY hash-object: always try to set up the git repository

diff: handle --no-index prefixes consistently

2016-09-13T22:45:45Z

If we see an explicit "git diff --no-index ../foo ../bar", then we do not set up the git repository at all (we already know we are in --no-index mode, so do not have to check "are we in a repository?"), and hence have no "prefix" within the repository. A patch generated by this command will have the filenames "a/../foo" and "b/../bar", no matter which directory we are in with respect to any repository. However, in the implicit case, where we notice that the files are outside the repository, we will have chdir()'d to the top-level of the repository. We then feed the prefix back to the diff machinery. As a result, running the same diff from a subdirectory will result in paths that look like "a/subdir/../../foo". Besides being unnecessarily long, this may also be confusing to the user: they don't care about the subdir or the repository at all; it's just where they happened to be when running the command. We should treat this the same as the explicit --no-index case. One way to address this would be to chdir() back to the original path before running our diff. However, that's a bit hacky, as we would also need to adjust $GIT_DIR, which could be a relative path from our top-level. Instead, we can reuse the diff machinery's RELATIVE_NAME option, which automatically strips off the prefix. Note that this _also_ restricts the diff to this relative prefix, but that's OK for our purposes: we queue our own diff pairs manually, and do not rely on that part of the diff code. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano