git/environment.c, branch v2.5.2

Merge branch 'nd/export-worktree' into maint

2015-08-19T21:41:30Z

Running an aliased command from a subdirectory when the .git thing in the working tree is a gitfile pointing elsewhere did not work. * nd/export-worktree: setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR

setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR

2015-06-26T18:52:26Z

In the test case, we run setup_git_dir_gently() the first time to read $GIT_DIR/config so that we can resolve aliases. We'll enter setup_discovered_git_dir() and may or may not call set_git_dir() near the end of the function, depending on whether the detected git dir is ".git" or not. This set_git_dir() will set env var $GIT_DIR. For normal repo, git dir detected via setup_discovered_git_dir() will be ".git", and set_git_dir() is not called. If .git file is used however, the git dir can't be ".git" and set_git_dir() is called and $GIT_DIR set. This is the key of this problem. If we expand an alias (or autocorrect command names), then setup_git_dir_gently() is run the second time. If $GIT_DIR is not set in the first run, we run the same setup_discovered_git_dir() as before. Nothing to see. If it is, however, we'll enter setup_explicit_git_dir() this time. This is where the "fun" is. If $GIT_WORK_TREE is not set but $GIT_DIR is, you are supposed to be at the root level of the worktree. But if you are in a subdir "foo/bar" (real worktree's top is "foo"), this rule bites you: your detected worktree is now "foo/bar", even though the first run correctly detected worktree as "foo". You get "internal error: work tree has already been set" as a result. Bottom line is, when $GIT_DIR is set, $GIT_WORK_TREE should be set too unless there's no work tree. But setting $GIT_WORK_TREE inside set_git_dir() may backfire. We don't know at that point if work tree is already configured by the caller. So set it when work tree is detected. It does not harm if $GIT_WORK_TREE is set while $GIT_DIR is not. Reported-by: Bjørnar Snoksrud Signed-off-by: Nguyễn Thái Ngọc Duy Signed-off-by: Junio C Hamano

Merge branch 'nd/multiple-work-trees'

2015-05-11T21:23:39Z

A replacement for contrib/workdir/git-new-workdir that does not rely on symbolic links and make sharing of objects and refs safer by making the borrowee and borrowers aware of each other. * nd/multiple-work-trees: (41 commits) prune --worktrees: fix expire vs worktree existence condition t1501: fix test with split index t2026: fix broken &&-chain t2026 needs procondition SANITY git-checkout.txt: a note about multiple checkout support for submodules checkout: add --ignore-other-wortrees checkout: pass whole struct to parse_branchname_arg instead of individual flags git-common-dir: make "modules/" per-working-directory directory checkout: do not fail if target is an empty directory t2025: add a test to make sure grafts is working from a linked checkout checkout: don't require a work tree when checking out into a new one git_path(): keep "info/sparse-checkout" per work-tree count-objects: report unused files in $GIT_DIR/worktrees/... gc: support prune --worktrees gc: factor out gc.pruneexpire parsing code gc: style change -- no SP before closing parenthesis checkout: clean up half-prepared directories in --to mode checkout: reject if the branch is already checked out elsewhere prune: strategies for linked checkouts checkout: support checking out into a new working directory ...

refs: introduce a "ref paranoia" flag

2015-03-20T19:40:49Z

Most operations that iterate over refs are happy to ignore broken cruft. However, some operations should be performed with knowledge of these broken refs, because it is better for the operation to choke on a missing object than it is to silently pretend that the ref did not exist (e.g., if we are computing the set of reachable tips in order to prune objects). These processes could just call for_each_rawref, except that ref iteration is often hidden behind other interfaces. For instance, for a destructive "repack -ad", we would have to inform "pack-objects" that we are destructive, and then it would in turn have to tell the revision code that our "--all" should include broken refs. It's much simpler to just set a global for "dangerous" operations that includes broken refs in all iterations. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano

Sync with v2.0.5

2014-12-17T19:42:28Z

* maint-2.0: Git 2.0.5 Git 1.9.5 Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index

Sync with v1.9.5

2014-12-17T19:28:54Z

* maint-1.9: Git 1.9.5 Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index

Sync with v1.8.5.6

2014-12-17T19:20:31Z

* maint-1.8.5: Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index

read-cache: optionally disallow NTFS .git variants

2014-12-17T19:04:45Z

The point of disallowing ".git" in the index is that we would never want to accidentally overwrite files in the repository directory. But this means we need to respect the filesystem's idea of when two paths are equal. The prior commit added a helper to make such a comparison for NTFS and FAT32; let's use it in verify_path(). We make this check optional for two reasons: 1. It restricts the set of allowable filenames, which is unnecessary for people who are not on NTFS nor FAT32. In practice this probably doesn't matter, though, as the restricted names are rather obscure and almost certainly would never come up in practice. 2. It has a minor performance penalty for every path we insert into the index. This patch ties the check to the core.protectNTFS config option. Though this is expected to be most useful on Windows, we allow it to be set everywhere, as NTFS may be mounted on other platforms. The variable does default to on for Windows, though. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano

read-cache: optionally disallow HFS+ .git variants

2014-12-17T19:04:44Z

The point of disallowing ".git" in the index is that we would never want to accidentally overwrite files in the repository directory. But this means we need to respect the filesystem's idea of when two paths are equal. The prior commit added a helper to make such a comparison for HFS+; let's use it in verify_path. We make this check optional for two reasons: 1. It restricts the set of allowable filenames, which is unnecessary for people who are not on HFS+. In practice this probably doesn't matter, though, as the restricted names are rather obscure and almost certainly would never come up in practice. 2. It has a minor performance penalty for every path we insert into the index. This patch ties the check to the core.protectHFS config option. Though this is expected to be most useful on OS X, we allow it to be set everywhere, as HFS+ may be mounted on other platforms. The variable does default to on for OS X, though. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano

setup.c: support multi-checkout repo setup

2014-12-01T19:00:15Z

The repo setup procedure is updated to detect $GIT_DIR/commondir and set $GIT_COMMON_DIR properly. The core.worktree is ignored when $GIT_COMMON_DIR is set. This is because the config file is shared in multi-checkout setup, but checkout directories _are_ different. Making core.worktree effective in all checkouts mean it's back to a single checkout. Helped-by: Johannes Sixt Signed-off-by: Nguyễn Thái Ngọc Duy Signed-off-by: Junio C Hamano