git/submodule-config.c, branch v2.35.2

submodule-config: pass repo upon blob config read

2021-09-08T18:48:09Z

When reading the config of a submodule, if reading from a blob, read using an explicitly specified repository instead of by adding the submodule's ODB as an alternate and then reading an object from the_repository. This makes the "grep --recurse-submodules with submodules without .gitmodules in the working tree" test in t7814 work when GIT_TEST_FATAL_REGISTER_SUBMODULE_ODB is true. Signed-off-by: Jonathan Tan Reviewed-by: Matheus Tavares Signed-off-by: Junio C Hamano

hash: provide per-algorithm null OIDs

2021-04-27T07:31:39Z

Up until recently, object IDs did not have an algorithm member, only a hash. Consequently, it was possible to share one null (all-zeros) object ID among all hash algorithms. Now that we're going to be handling objects from multiple hash algorithms, it's important to make sure that all object IDs have a correct algorithm field. Introduce a per-algorithm null OID, and add it to struct hash_algo. Introduce a wrapper function as well, and use it everywhere we used to use the null_oid constant. Signed-off-by: brian m. carlson Signed-off-by: Junio C Hamano

hashmap: provide deallocation function names

2020-11-02T20:15:50Z

hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed for a while, but aren't necessarily the clearest names, especially with hashmap_partial_clear() being added to the mix and lazy-initialization now being supported. Peff suggested we adopt the following names[1]: - hashmap_clear() - remove all entries and de-allocate any hashmap-specific data, but be ready for reuse - hashmap_clear_and_free() - ditto, but free the entries themselves - hashmap_partial_clear() - remove all entries but don't deallocate table - hashmap_partial_clear_and_free() - ditto, but free the entries This patch provides the new names and converts all existing callers over to the new naming scheme. [1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/ Signed-off-by: Elijah Newren Signed-off-by: Junio C Hamano

fetch: avoid reading submodule config until needed

2020-08-18T20:25:05Z

In "fetch", there are two parameters submodule_fetch_jobs_config and recurse_submodules that can be set in a variety of ways: through .gitmodules, through .git/config, and through the command line. Currently "fetch" handles this by first reading .gitmodules, then reading .git/config (allowing it to overwrite existing values), then reading the command line (allowing it to overwrite existing values). Notice that we can avoid reading .gitmodules if .git/config and/or the command line already provides us with what we need. In addition, if recurse_submodules is found to be "no", we do not need the value of submodule_fetch_jobs_config. Avoiding reading .gitmodules is especially important when we use "git fetch" to perform lazy fetches in a partial clone because the .gitmodules file itself might need to be lazy fetched (and otherwise causing an infinite loop). In light of all this, avoid reading .gitmodules until necessary. When reading it, we may only need one of the two parameters it provides, so teach fetch_config_from_gitmodules() to support NULL arguments. With this patch, users (including Git itself when invoking "git fetch" to lazy-fetch) will be able to guarantee avoiding reading .gitmodules by passing --recurse-submodules=no. Signed-off-by: Jonathan Tan Signed-off-by: Junio C Hamano

parse_config_key(): return subsection len as size_t

2020-04-10T21:44:29Z

We return the length to a subset of a string using an "int *" out-parameter. This is fine most of the time, as we'd expect config keys to be relatively short, but it could behave oddly if we had a gigantic config key. A more appropriate type is size_t. Let's switch over, which lets our callers use size_t as appropriate (they are bound by our type because they must pass the out-parameter as a pointer). This is mostly just a cleanup to make it clear this code handles long strings correctly. In practice, our config parser already chokes on long key names (because of a similar int/size_t mixup!). When doing an int/size_t conversion, we have to be careful that nobody was trying to assign a negative value to the variable. I manually confirmed that for each case here. They tend to just feed the result to xmemdupz() or similar; in a few cases I adjusted the parameter types for helper functions to make sure the size_t is preserved. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano

Merge branch 'mr/show-config-scope'

2020-02-17T21:22:17Z

"git config" learned to show in which "scope", in addition to in which file, each config setting comes from. * mr/show-config-scope: config: add '--show-scope' to print the scope of a config value submodule-config: add subomdule config scope config: teach git_config_source to remember its scope config: preserve scope in do_git_config_sequence config: clarify meaning of command line scoping config: split repo scope to local and worktree config: make scope_name non-static and rename it t1300: create custom config file without special characters t1300: fix over-indented HERE-DOCs config: fix typo in variable name

submodule-config: add subomdule config scope

2020-02-10T18:49:12Z

Before the changes to teach git_config_source to remember scope information submodule-config.c never needed to consider the question of config scope. Even though zeroing out git_config_source is still correct and preserved the previous behavior of setting the scope to CONFIG_SCOPE_UNKNOWN, it's better to be explicit about such situations by explicitly setting the scope. As none of the current config_scope enumerations make sense we create CONFIG_SCOPE_SUBMODULE to describe the situation. Signed-off-by: Matthew Rogers Signed-off-by: Junio C Hamano

submodule-config: add skip_if_read option to repo_read_gitmodules()

2020-01-17T21:52:14Z

Currently, submodule-config.c doesn't have an externally accessible function to read gitmodules only if it wasn't already read. But this exact behavior is internally implemented by gitmodules_read_check(), to perform a lazy load. Let's merge this function with repo_read_gitmodules() adding a 'skip_if_read' which allows both internal and external callers to access this functionality. This simplifies a little the code. The added option will also be used in the following patch. Signed-off-by: Matheus Tavares Signed-off-by: Junio C Hamano

fix-typo: consecutive-word duplications

2019-12-16T19:53:11Z

Correct unintentional duplication(s) of words, such as "the the", and "can can" etc. The changes are only applied to cases where it's fixing what is clearly wrong or prone to misunderstanding, as suggested by the reviewers. Helped-by: Johannes Schindelin Helped-by: Denton Liu Helped-by: Junio C Hamano Signed-off-by: ryenus Signed-off-by: Junio C Hamano

Sync with 2.23.1

2019-12-06T15:31:39Z

* maint-2.23: (44 commits) Git 2.23.1 Git 2.22.2 Git 2.21.1 mingw: sh arguments need quoting in more circumstances mingw: fix quoting of empty arguments for `sh` mingw: use MSYS2 quoting even when spawning shell scripts mingw: detect when MSYS2's sh is to be spawned more robustly t7415: drop v2.20.x-specific work-around Git 2.20.2 t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x Git 2.19.3 Git 2.18.2 Git 2.17.3 Git 2.16.6 test-drop-caches: use `has_dos_drive_prefix()` Git 2.15.4 Git 2.14.6 mingw: handle `subst`-ed "DOS drives" mingw: refuse to access paths with trailing spaces or periods mingw: refuse to access paths with illegal characters ...