git/submodule.c, branch v2.45.3

Sync with 2.44.1

2024-04-29T18:42:30Z

* maint-2.44: (41 commits) Git 2.44.1 Git 2.43.4 Git 2.42.2 Git 2.41.1 Git 2.40.2 Git 2.39.4 fsck: warn about symlink pointing inside a gitdir core.hooksPath: add some protection while cloning init.templateDir: consider this config setting protected clone: prevent hooks from running during a clone Add a helper function to compare file contents init: refactor the template directory discovery into its own function find_hook(): refactor the `STRIP_EXTENSION` logic clone: when symbolic links collide with directories, keep the latter entry: report more colliding paths t5510: verify that D/F confusion cannot lead to an RCE submodule: require the submodule path to contain directories only clone_submodule: avoid using `access()` on directories submodules: submodule paths must not contain symlinks clone: prevent clashing git dirs when cloning submodule in parallel ...

Sync with 2.42.2

2024-04-19T10:38:50Z

* maint-2.42: (39 commits) Git 2.42.2 Git 2.41.1 Git 2.40.2 Git 2.39.4 fsck: warn about symlink pointing inside a gitdir core.hooksPath: add some protection while cloning init.templateDir: consider this config setting protected clone: prevent hooks from running during a clone Add a helper function to compare file contents init: refactor the template directory discovery into its own function find_hook(): refactor the `STRIP_EXTENSION` logic clone: when symbolic links collide with directories, keep the latter entry: report more colliding paths t5510: verify that D/F confusion cannot lead to an RCE submodule: require the submodule path to contain directories only clone_submodule: avoid using `access()` on directories submodules: submodule paths must not contain symlinks clone: prevent clashing git dirs when cloning submodule in parallel t7423: add tests for symlinked submodule directories has_dir_name(): do not get confused by characters < '/' ...

Sync with 2.41.1

2024-04-19T10:38:46Z

* maint-2.41: (38 commits) Git 2.41.1 Git 2.40.2 Git 2.39.4 fsck: warn about symlink pointing inside a gitdir core.hooksPath: add some protection while cloning init.templateDir: consider this config setting protected clone: prevent hooks from running during a clone Add a helper function to compare file contents init: refactor the template directory discovery into its own function find_hook(): refactor the `STRIP_EXTENSION` logic clone: when symbolic links collide with directories, keep the latter entry: report more colliding paths t5510: verify that D/F confusion cannot lead to an RCE submodule: require the submodule path to contain directories only clone_submodule: avoid using `access()` on directories submodules: submodule paths must not contain symlinks clone: prevent clashing git dirs when cloning submodule in parallel t7423: add tests for symlinked submodule directories has_dir_name(): do not get confused by characters < '/' docs: document security issues around untrusted .git dirs ...

Sync with 2.40.2

2024-04-19T10:38:42Z

* maint-2.40: (39 commits) Git 2.40.2 Git 2.39.4 fsck: warn about symlink pointing inside a gitdir core.hooksPath: add some protection while cloning init.templateDir: consider this config setting protected clone: prevent hooks from running during a clone Add a helper function to compare file contents init: refactor the template directory discovery into its own function find_hook(): refactor the `STRIP_EXTENSION` logic clone: when symbolic links collide with directories, keep the latter entry: report more colliding paths t5510: verify that D/F confusion cannot lead to an RCE submodule: require the submodule path to contain directories only clone_submodule: avoid using `access()` on directories submodules: submodule paths must not contain symlinks clone: prevent clashing git dirs when cloning submodule in parallel t7423: add tests for symlinked submodule directories has_dir_name(): do not get confused by characters < '/' docs: document security issues around untrusted .git dirs upload-pack: disable lazy-fetching by default ...

Sync with 2.39.4

2024-04-19T10:38:37Z

* maint-2.39: (38 commits) Git 2.39.4 fsck: warn about symlink pointing inside a gitdir core.hooksPath: add some protection while cloning init.templateDir: consider this config setting protected clone: prevent hooks from running during a clone Add a helper function to compare file contents init: refactor the template directory discovery into its own function find_hook(): refactor the `STRIP_EXTENSION` logic clone: when symbolic links collide with directories, keep the latter entry: report more colliding paths t5510: verify that D/F confusion cannot lead to an RCE submodule: require the submodule path to contain directories only clone_submodule: avoid using `access()` on directories submodules: submodule paths must not contain symlinks clone: prevent clashing git dirs when cloning submodule in parallel t7423: add tests for symlinked submodule directories has_dir_name(): do not get confused by characters < '/' docs: document security issues around untrusted .git dirs upload-pack: disable lazy-fetching by default fetch/clone: detect dubious ownership of local repositories ...

submodule: require the submodule path to contain directories only

2024-04-17T20:30:04Z

Submodules are stored in subdirectories of their superproject. When these subdirectories have been replaced with symlinks by a malicious actor, all kinds of mayhem can be caused. This _should_ not be possible, but many CVEs in the past showed that _when_ possible, it allows attackers to slip in code that gets executed during, say, a `git clone --recursive` operation. Let's add some defense-in-depth to disallow submodule paths to have anything except directories in them. Signed-off-by: Johannes Schindelin

clone: prevent clashing git dirs when cloning submodule in parallel

2024-04-17T20:30:01Z

While it is expected to have several git dirs within the `.git/modules/` tree, it is important that they do not interfere with each other. For example, if one submodule was called "captain" and another submodule "captain/hooks", their respective git dirs would clash, as they would be located in `.git/modules/captain/` and `.git/modules/captain/hooks/`, respectively, i.e. the latter's files could clash with the actual Git hooks of the former. To prevent these clashes, and in particular to prevent hooks from being written and then executed as part of a recursive clone, we introduced checks as part of the fix for CVE-2019-1387 in a8dee3ca61 (Disallow dubiously-nested submodule git directories, 2019-10-01). It is currently possible to bypass the check for clashing submodule git dirs in two ways: 1. parallel cloning 2. checkout --recurse-submodules Let's check not only before, but also after parallel cloning (and before checking out the submodule), that the git dir is not clashing with another one, otherwise fail. This addresses the parallel cloning issue. As to the parallel checkout issue: It requires quite a few manual steps to create clashing git dirs because Git itself would refuse to initialize the inner one, as demonstrated by the test case. Nevertheless, let's teach the recursive checkout (namely, the `submodule_move_head()` function that is used by the recursive checkout) to be careful to verify that it does not use a clashing git dir, and if it does, disable it (by deleting the `HEAD` file so that subsequent Git calls won't recognize it as a git dir anymore). Note: The parallel cloning test case contains a `cat err` that proved to be highly useful when analyzing the racy nature of the operation (the operation can fail with three different error messages, depending on timing), and was left on purpose to ease future debugging should the need arise. Signed-off-by: Filip Hejsek Signed-off-by: Johannes Schindelin

config: add --comment option to add a comment

2024-03-15T19:25:35Z

Introduce the ability to append comments to modifications made using git-config. Example usage: git config --comment "changed via script" \ --add safe.directory /home/alice/repo.git based on the proposed patch, the output produced is: [safe] directory = /home/alice/repo.git #changed via script Users need to be able to distinguish between config entries made using automation and entries made by a human. Automation can add comments containing a URL pointing to explanations for the change made, avoiding questions from users as to why their config file was changed by a third party. The implementation ensures that a # character is unconditionally prepended to the provided comment string, and that the comment text is appended as a suffix to the changed key-value-pair in the same line of text. Multi-line comments (i.e. comments containing linefeed) are rejected as errors, causing Git to exit without making changes. Comments are aimed at humans who inspect or change their Git config using a pager or editor. Comments are not meant to be read or displayed by git-config at a later time. Signed-off-by: Ralph Seichter Signed-off-by: Junio C Hamano

Merge branch 'js/merge-base-with-missing-commit'

2024-03-11T21:12:30Z

Make sure failure return from merge_bases_many() is properly caught. * js/merge-base-with-missing-commit: merge-ort/merge-recursive: do report errors in `merge_submodule()` merge-recursive: prepare for `merge_submodule()` to report errors commit-reach(repo_get_merge_bases_many_dirty): pass on errors commit-reach(repo_get_merge_bases_many): pass on "missing commits" errors commit-reach(get_octopus_merge_bases): pass on "missing commits" errors commit-reach(repo_get_merge_bases): pass on "missing commits" errors commit-reach(get_merge_bases_many_0): pass on "missing commits" errors commit-reach(merge_bases_many): pass on "missing commits" errors commit-reach(paint_down_to_common): start reporting errors commit-reach(paint_down_to_common): prepare for handling shallow commits commit-reach(repo_in_merge_bases_many): report missing commits commit-reach(repo_in_merge_bases_many): optionally expect missing commits commit-reach(paint_down_to_common): plug two memory leaks

commit-reach(repo_get_merge_bases): pass on "missing commits" errors

2024-02-29T16:06:01Z

The `merge_bases_many()` function was just taught to indicate parsing errors, and now the `repo_get_merge_bases()` function (which is also surfaced via the `repo_get_merge_bases()` macro) is aware of that, too. Naturally, there are a lot of callers that need to be adjusted now, too. Next step: adjust the callers of `get_octopus_merge_bases()`. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano