git/submodule.c, branch v2.6.2

Merge branch 'jc/am-state-fix'

2015-08-31T22:39:03Z

Recent reimplementation of "git am" changed the format of state files kept in $GIT_DIR/rebase-apply/ without meaning to do so, primarily because write_file() API was cumbersome to use and it was easy to mistakenly make text files with incomplete lines. Update write_file() interface to make it harder to misuse. * jc/am-state-fix: write_file(): drop caller-supplied LF from calls to create a one-liner file write_file_v(): do not leave incomplete line at the end write_file(): drop "fatal" parameter builtin/am: make sure state files are text builtin/am: introduce write_state_*() helper functions

Merge branch 'hv/submodule-config'

2015-08-31T22:38:52Z

The gitmodules API accessed from the C code learned to cache stuff lazily. * hv/submodule-config: submodule: allow erroneous values for the fetchRecurseSubmodules option submodule: use new config API for worktree configurations submodule: extract functions for config set and lookup submodule: implement a config API for lookup of .gitmodules values

write_file(): drop caller-supplied LF from calls to create a one-liner file

2015-08-25T19:49:19Z

All of the callsites covered by this change call write_file() or write_file_gently() to create a one-liner file. Drop the caller supplied LF and let these callees to append it as necessary. Signed-off-by: Junio C Hamano

write_file(): drop "fatal" parameter

2015-08-24T20:09:02Z

All callers except three passed 1 for the "fatal" parameter to ask this function to die upon error, but to a casual reader of the code, it was not all obvious what that 1 meant. Instead, split the function into two based on a common write_file_v() that takes the flag, introduce write_file_gently() as a new way to attempt creating a file without dying on error, and make three callers to call it. Signed-off-by: Junio C Hamano

submodule: allow erroneous values for the fetchRecurseSubmodules option

2015-08-19T18:43:10Z

We should not die when reading the submodule config cache since the user might not be able to get out of that situation when the configuration is part of the history. We should handle this condition later when the value is about to be used. Signed-off-by: Heiko Voigt Signed-off-by: Stefan Beller Signed-off-by: Junio C Hamano

submodule: use new config API for worktree configurations

2015-08-19T18:43:10Z

We remove the extracted functions and directly parse into and read out of the cache. This allows us to have one unified way of accessing submodule configuration values specific to single submodules. Regardless whether we need to access a configuration from history or from the worktree. Signed-off-by: Heiko Voigt Signed-off-by: Junio C Hamano Signed-off-by: Stefan Beller Signed-off-by: Junio C Hamano

submodule: extract functions for config set and lookup

2015-08-19T18:43:09Z

This is one step towards using the new configuration API. We just extract these functions to make replacing the actual code easier. Signed-off-by: Heiko Voigt Signed-off-by: Stefan Beller Signed-off-by: Junio C Hamano

submodule: implement a config API for lookup of .gitmodules values

2015-08-19T18:43:09Z

In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt Signed-off-by: Stefan Beller Signed-off-by: Junio C Hamano

convert "enum date_mode" into a struct

2015-06-29T18:39:07Z

In preparation for adding date modes that may carry extra information beyond the mode itself, this patch converts the date_mode enum into a struct. Most of the conversion is fairly straightforward; we pass the struct as a pointer and dereference the type field where necessary. Locations that declare a date_mode can use a "{}" constructor. However, the tricky case is where we use the enum labels as constants, like: show_date(t, tz, DATE_NORMAL); Ideally we could say: show_date(t, tz, &{ DATE_NORMAL }); but of course C does not allow that. Likewise, we cannot cast the constant to a struct, because we need to pass an actual address. Our options are basically: 1. Manually add a "struct date_mode d = { DATE_NORMAL }" definition to each caller, and pass "&d". This makes the callers uglier, because they sometimes do not even have their own scope (e.g., they are inside a switch statement). 2. Provide a pre-made global "date_normal" struct that can be passed by address. We'd also need "date_rfc2822", "date_iso8601", and so forth. But at least the ugliness is defined in one place. 3. Provide a wrapper that generates the correct struct on the fly. The big downside is that we end up pointing to a single global, which makes our wrapper non-reentrant. But show_date is already not reentrant, so it does not matter. This patch implements 3, along with a minor macro to keep the size of the callers sane. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano

Merge branch 'bc/object-id'

2015-06-05T19:17:37Z

for_each_ref() callback functions were taught to name the objects not with "unsigned char sha1[20]" but with "struct object_id". * bc/object-id: (56 commits) struct ref_lock: convert old_sha1 member to object_id warn_if_dangling_symref(): convert local variable "junk" to object_id each_ref_fn_adapter(): remove adapter rev_list_insert_ref(): remove unneeded arguments rev_list_insert_ref_oid(): new function, taking an object_oid mark_complete(): remove unneeded arguments mark_complete_oid(): new function, taking an object_oid clear_marks(): rewrite to take an object_id argument mark_complete(): rewrite to take an object_id argument send_ref(): convert local variable "peeled" to object_id upload-pack: rewrite functions to take object_id arguments find_symref(): convert local variable "unused" to object_id find_symref(): rewrite to take an object_id argument write_one_ref(): rewrite to take an object_id argument write_refs_to_temp_dir(): convert local variable sha1 to object_id submodule: rewrite to take an object_id argument shallow: rewrite functions to take object_id arguments handle_one_ref(): rewrite to take an object_id argument add_info_ref(): rewrite to take an object_id argument handle_one_reflog(): rewrite to take an object_id argument ...