diff options
Diffstat (limited to 'git-send-email.perl')
| -rwxr-xr-x | git-send-email.perl | 127 |
1 files changed, 86 insertions, 41 deletions
diff --git a/git-send-email.perl b/git-send-email.perl index 5861e99a6e..26e18eebd9 100755 --- a/git-send-email.perl +++ b/git-send-email.perl @@ -220,6 +220,10 @@ my $compose_filename; my $force = 0; my $dump_aliases = 0; +# Variables to prevent short format-patch options from being captured +# as abbreviated send-email options +my $reroll_count; + # Handle interactive edition of files. my $multiedit; my $editor; @@ -542,6 +546,7 @@ my %options = ( "batch-size=i" => \$batch_size, "relogin-delay=i" => \$relogin_delay, "git-completion-helper" => \$git_completion_helper, + "v=s" => \$reroll_count, ); $rc = GetOptions(%options); @@ -782,19 +787,51 @@ if (@rev_list_opts) { die __("Cannot run git format-patch from outside a repository\n") unless $repo; require File::Temp; - push @files, $repo->command('format-patch', '-o', File::Temp::tempdir(CLEANUP => 1), @rev_list_opts); + push @files, $repo->command('format-patch', '-o', File::Temp::tempdir(CLEANUP => 1), + defined $reroll_count ? ('-v', $reroll_count) : (), + @rev_list_opts); } -@files = handle_backup_files(@files); +if (defined $sender) { + $sender =~ s/^\s+|\s+$//g; + ($sender) = expand_aliases($sender); +} else { + $sender = $repoauthor->() || $repocommitter->() || ''; +} + +# $sender could be an already sanitized address +# (e.g. sendemail.from could be manually sanitized by user). +# But it's a no-op to run sanitize_address on an already sanitized address. +$sender = sanitize_address($sender); + +$time = time - scalar $#files; if ($validate) { + # FIFOs can only be read once, exclude them from validation. + my @real_files = (); foreach my $f (@files) { unless (-p $f) { - validate_patch($f, $target_xfer_encoding); + push(@real_files, $f); } } + + # Run the loop once again to avoid gaps in the counter due to FIFO + # arguments provided by the user. + my $num = 1; + my $num_files = scalar @real_files; + $ENV{GIT_SENDEMAIL_FILE_TOTAL} = "$num_files"; + foreach my $r (@real_files) { + $ENV{GIT_SENDEMAIL_FILE_COUNTER} = "$num"; + pre_process_file($r, 1); + validate_patch($r, $target_xfer_encoding); + $num += 1; + } + delete $ENV{GIT_SENDEMAIL_FILE_COUNTER}; + delete $ENV{GIT_SENDEMAIL_FILE_TOTAL}; } +@files = handle_backup_files(@files); + if (@files) { unless ($quiet) { print $_,"\n" for (@files); @@ -1043,18 +1080,6 @@ if (!$force) { } } -if (defined $sender) { - $sender =~ s/^\s+|\s+$//g; - ($sender) = expand_aliases($sender); -} else { - $sender = $repoauthor->() || $repocommitter->() || ''; -} - -# $sender could be an already sanitized address -# (e.g. sendemail.from could be manually sanitized by user). -# But it's a no-op to run sanitize_address on an already sanitized address. -$sender = sanitize_address($sender); - my $to_whom = __("To whom should the emails be sent (if anyone)?"); my $prompting = 0; if (!@initial_to && !defined $to_cmd) { @@ -1214,10 +1239,6 @@ sub make_message_id { #print "new message id = $message_id\n"; # Was useful for debugging } - - -$time = time - scalar $#files; - sub unquote_rfc2047 { local ($_) = @_; my $charset; @@ -1495,16 +1516,7 @@ sub file_name_is_absolute { return File::Spec::Functions::file_name_is_absolute($path); } -# Prepares the email, then asks the user what to do. -# -# If the user chooses to send the email, it's sent and 1 is returned. -# If the user chooses not to send the email, 0 is returned. -# If the user decides they want to make further edits, -1 is returned and the -# caller is expected to call send_message again after the edits are performed. -# -# If an error occurs sending the email, this just dies. - -sub send_message { +sub gen_header { my @recipients = unique_email_list(@to); @cc = (grep { my $cc = extract_valid_address_or_die($_); not grep { $cc eq $_ || $_ =~ /<\Q${cc}\E>$/ } @recipients @@ -1530,7 +1542,7 @@ sub send_message { To: $to${ccline} Subject: $subject Date: $date -Message-Id: $message_id +Message-ID: $message_id "; if ($use_xmailer) { $header .= "X-Mailer: git-send-email $gitversion\n"; @@ -1546,6 +1558,22 @@ Message-Id: $message_id if (@xh) { $header .= join("\n", @xh) . "\n"; } + my $recipients_ref = \@recipients; + return ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header); +} + +# Prepares the email, then asks the user what to do. +# +# If the user chooses to send the email, it's sent and 1 is returned. +# If the user chooses not to send the email, 0 is returned. +# If the user decides they want to make further edits, -1 is returned and the +# caller is expected to call send_message again after the edits are performed. +# +# If an error occurs sending the email, this just dies. + +sub send_message { + my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header(); + my @recipients = @$recipients_ref; my @sendmail_parameters = ('-i', @recipients); my $raw_from = $sender; @@ -1735,11 +1763,8 @@ $in_reply_to = $initial_in_reply_to; $references = $initial_in_reply_to || ''; $message_num = 0; -# Prepares the email, prompts the user, sends it out -# Returns 0 if an edit was done and the function should be called again, or 1 -# otherwise. -sub process_file { - my ($t) = @_; +sub pre_process_file { + my ($t, $quiet) = @_; open my $fh, "<", $t or die sprintf(__("can't open file %s"), $t); @@ -1825,7 +1850,7 @@ sub process_file { $has_mime_version = 1; push @xh, $_; } - elsif (/^Message-Id: (.*)/i) { + elsif (/^Message-ID: (.*)/i) { $message_id = $1; } elsif (/^Content-Transfer-Encoding: (.*)/i) { @@ -1893,9 +1918,9 @@ sub process_file { } close $fh; - push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t) + push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t, $quiet) if defined $to_cmd; - push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t) + push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t, $quiet) if defined $cc_cmd && !$suppress_cc{'cccmd'}; if ($broken_encoding{$t} && !$has_content_type) { @@ -1954,6 +1979,15 @@ sub process_file { @initial_to = @to; } } +} + +# Prepares the email, prompts the user, and sends it out +# Returns 0 if an edit was done and the function should be called again, or 1 +# on the email being successfully sent out. +sub process_file { + my ($t) = @_; + + pre_process_file($t, $quiet); my $message_was_sent = send_message(); if ($message_was_sent == -1) { @@ -2002,7 +2036,7 @@ foreach my $t (@files) { # Execute a command (e.g. $to_cmd) to get a list of email addresses # and return a results array sub recipients_cmd { - my ($prefix, $what, $cmd, $file) = @_; + my ($prefix, $what, $cmd, $file, $quiet) = @_; my @addresses = (); open my $fh, "-|", "$cmd \Q$file\E" @@ -2088,10 +2122,21 @@ sub validate_patch { chdir($repo->wc_path() or $repo->repo_path()) or die("chdir: $!"); local $ENV{"GIT_DIR"} = $repo->repo_path(); + + my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header(); + + require File::Temp; + my ($header_filehandle, $header_filename) = File::Temp::tempfile( + TEMPLATE => ".gitsendemail.header.XXXXXX", + DIR => $repo->repo_path(), + UNLINK => 1, + ); + print $header_filehandle $header; + my @cmd = ("git", "hook", "run", "--ignore-missing", $hook_name, "--"); - my @cmd_msg = (@cmd, "<patch>"); - my @cmd_run = (@cmd, $target); + my @cmd_msg = (@cmd, "<patch>", "<header>"); + my @cmd_run = (@cmd, $target, $header_filename); $hook_error = system_or_msg(\@cmd_run, undef, "@cmd_msg"); chdir($cwd_save) or die("chdir: $!"); } |