| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix missing single-quote pairs in a documentation page.
* kh/doc-interpret-trailers-markup-fix:
doc: interpret-trailers: close all pairs of single quotes
|
|
Doc mark-up fix.
* ja/asciidoc-doctor-verbatim-fixes:
doc: fix asciidoc format compatibility in pretty-formats.adoc
|
|
The command Revert Changes has two different erroneous behaviors
depending on the Tcl version used.
The command uses a "chord" facility where different "notes" are
evaluated asynchronously and any error is reported after all of them
have finished. The intent is that a private namespace is used where
the notes can store the error state. Tcl 9 changed namespace handling
in a subtle way, as https://www.tcl-lang.org/software/tcltk/9.0.html
summarizes under "Notable incompatibilities":
Unqualified varnames resolved in current namespace, not global.
Note that in almost all cases where this causes a change, the
change is actually the removal of a latent bug.
And that's exactly what happens here.
- Under Tcl 9:
- When the command operates without any errors, the variable `err`
is never set. When the error handler wants to inspect `err` (in
the correct private namespace), it does not find it and a Tcl
error about an unset variable occurs. Incidentally, this is also
the case when the user cancels the operation with the option
"Do Nothing"!
On the other hand, when an error occurs during the operation, `err`
is set and found as intended.
Check for the existence of the variable `err` before the attempt to
read it.
- Under Tcl 8.6:
The error handler looks up `err` in the global namespace, which is
bogus and unintended. The variable is set due to the many
`catch ... err` that occur during startup in the global namespace.
- When the command operates without any errors, the error handler
finds the global `err`, which happens to be the empty string at
this point, and no error is reported.
On the other hand, when an error occurs during the operation, the
global `err` is set and found, so that an error is reported as
desired.
However, the value of `err` persists in the global namespace. When
the command is repeated, an error is reported again, even if there
was actually no error, and even "Do Nothing" was used to cancel
the operation.
Clear the global `err` before the operation begins.
The lingering error message is not a problem under Tcl 9, because a
prestine namespace is established every time the command is used.
This fixes https://github.com/j6t/git-gui/issues/21.
Helped-by: Igor Stepushchik
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Git does not really "store the contents of the next commit"
anywhere; rather, you the user use the index to prepare it.
Signed-off-by: Julia Evans <julia@jvns.ca>
[jc; made the change relative to what is already in 'next']
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When comparing large commit ranges (e.g., 250,000+ commits), range-diff
attempts to allocate an n×n cost matrix that can exhaust available
memory. For example, with 256,784 commits (n = 513,568), the matrix
would require approximately 256GB of memory (513,568² × 4 bytes),
causing either immediate segmentation faults due to integer overflow or
system hangs.
Add a memory limit check in get_correspondences() before allocating the
cost matrix. This check uses the total size in bytes (n² × sizeof(int))
and compares it against a configurable maximum, preventing both
excessive memory usage and integer overflow issues.
The limit is configurable via a new --max-memory option that accepts
human-readable sizes (e.g., "1G", "500M"). The default is 4GB for 64 bit
systems and 2GB for 32 bit systems. This allows comparing ranges of
approximately 32,000 (16,000) commits - generous for real-world use cases
while preventing impractical operations.
When the limit is exceeded, range-diff now displays a clear error
message showing both the requested memory size and the maximum allowed,
formatted in human-readable units for better user experience.
Example usage:
git range-diff --max-memory=1G branch1...branch2
git range-diff --max-memory=500M base..topic1 base..topic2
This approach was chosen over alternatives:
- Pre-counting commits: Would require spawning additional git processes
and reading all commits twice
- Limiting by commit count: Less precise than actual memory usage
- Streaming approach: Would require significant refactoring of the
current algorithm
This issue was previously discussed in:
https://lore.kernel.org/git/RFC-cover-v2-0.5-00000000000-20211210T122901Z-avarab@gmail.com/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paulo Casaretto <pcasaretto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Manual page for "gitk" is updated with the current maintainer's
name.
* js/doc-gitk-history:
doc/gitk: update reference to the external project
|
|
"git describe <blob>" misbehaves and/or crashes in some corner
cases, which has been taught to exit with failure gracefully.
* jk/describe-blob:
describe: pass commit to describe_commit()
describe: handle blob traversal with no commits
describe: catch unborn branch in describe_blob()
describe: error if blob not found
describe: pass oid struct by const pointer
|
|
"git fetch" can clobber a symref that is dangling when the
remote-tracking HEAD is set to auto update, which has been
corrected.
* jk/no-clobber-dangling-symref-with-fetch:
refs: do not clobber dangling symrefs
t5510: prefer "git -C" to subshell for followRemoteHEAD tests
t5510: stop changing top-level working directory
t5510: make confusing config cleanup more explicit
|
|
Discord has been added to the first contribution documentation as
another way to ask for help.
* ds/doc-community-discord:
doc: add discord to ways of getting help
|
|
Code clean-ups.
* ps/reftable-libgit2-cleanup:
refs/reftable: always reload stacks when creating lock
reftable: don't second-guess errors from flock interface
reftable/stack: handle outdated stacks when compacting
reftable/stack: allow passing flags to `reftable_stack_add()`
reftable/stack: fix compiler warning due to missing braces
reftable/stack: reorder code to avoid forward declarations
reftable/writer: drop Git-specific `QSORT()` macro
reftable/writer: fix type used for number of records
|
|
Test fix.
* ad/t1517-short-help-tests-fix:
t/t1517: mark tests that fail with GIT_TEST_INSTALLED
|
|
Our 'git last-modified' performs a revision walk, and computes a diff at
each point in the walk to figure out whether a given revision changed
any of the paths it considers interesting.
When changed-path Bloom filters are available, we can avoid computing
many such diffs. Before computing a diff, we first check if any of the
remaining paths of interest were possibly changed at a given commit by
consulting its Bloom filter. If any of them are, we are resigned to
compute the diff.
If none of those queries returned "maybe", we know that the given commit
doesn't contain any changed paths which are interesting to us. So, we
can avoid computing it in this case.
Comparing the perf test results on git.git:
Test HEAD~ HEAD
------------------------------------------------------------------------------------
8020.1: top-level last-modified 4.49(4.34+0.11) 2.22(2.05+0.09) -50.6%
8020.2: top-level recursive last-modified 5.64(5.45+0.11) 5.62(5.30+0.11) -0.4%
8020.3: subdir last-modified 0.11(0.06+0.04) 0.07(0.03+0.04) -36.4%
Based-on-patch-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This just runs some simple last-modified commands. We already test
correctness in the regular suite, so this is just about finding
performance regressions from one version to another.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to git-blame(1), introduce a new subcommand
git-last-modified(1). This command shows the most recent modification to
paths in a tree. It does so by expanding the tree at a given commit,
taking note of the current state of each path, and then walking
backwards through history looking for commits where each path changed
into its final commit ID.
Based-on-patch-by: Jeff King <peff@peff.net>
Improved-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This provides a unified look-and-feel in Git for Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
"Question?" is maybe not the most informative thing to ask. In the
absence of better information, it is the best we can do, of course.
However, Git for Windows' auto updater just learned the trick to use
git-gui--askyesno to ask the user whether to update now or not. And in
this scripted scenario, we can easily pass a command-line option to
change the window title.
So let's support that with the new `--title <title>` option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Make use of the new environment variable GIT_ASK_YESNO to support the
recently implemented fallback in case unlink, rename or rmdir fail for
files in use on Windows. The added dialog will present a yes/no question
to the the user which will currently be used by the windows compat layer
to let the user retry a failed file operation.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The compatObjectFormat extension is used to hide an incomplete
feature that is not yet usable for any purpose other than
developing the feature further. Document it as such to discourage
its use by mere mortals.
* bc/doc-compat-object-format-not-working:
docs: note that extensions.compatobjectformat is incomplete
|
|
Under a race against another process that is repacking the
repository, especially a partially cloned one, "git fetch" may
mistakenly think some objects we do have are missing, which has
been corrected.
* jk/fetch-check-graph-objects-fix:
fetch-pack: re-scan when double-checking graph objects
|
|
"git log -L..." compared trees of multiple parents with the tree of the
merge result in an unnecessarily inefficient way.
* sg/line-log-merge-optim:
line-log: simplify condition checking for merge commits
line-log: initialize diff queue in process_ranges_ordinary_commit()
line-log: get rid of the parents array in process_ranges_merge_commit()
line-log: avoid unnecessary tree diffs when processing merge commits
|
|
The start_delayed_progress() function in the progress eye-candy API
did not clear its internal state, making an initial delay value
larger than 1 second ineffective, which has been corrected.
* js/progress-delay-fix:
progress: pay attention to (customized) delay time
|
|
Documentation for "git rebase" has been updated.
* je/doc-rebase:
doc: git-rebase: update discussion of internals
doc: git-rebase: move --onto explanation down
doc: git rebase: clarify arguments syntax
doc: git rebase: dedup merge conflict discussion
doc: git-rebase: start with an example
|
|
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
When running 'git ls-files' with a pathspec, the index entries get
filtered according to that pathspec before iterating over them in
show_files(). In 78087097b8 (ls-files: add --sparse option,
2021-12-22), this iteration was prefixed with a check for the '--sparse'
option which allows the command to output directory entries; this
created a pre-loop call to ensure_full_index().
However, when a user runs 'git ls-files' where the pathspec matches
directories that are recursively matched in the sparse-checkout, there
are not any sparse directories that match the pathspec so they would not
be written to the output. The expansion in this case is just a
performance drop for no behavior difference.
Replace this global check to expand the index with a check inside the
loop for a matched sparse directory. If we see one, then expand the
index and continue from the current location. This is safe since the
previous entries in the index did not have any sparse directories and
thus would remain stable in this expansion.
A test in t1092 confirms that this changes the behavior.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'tk87-touchpad-scroll' of github.com:ZhongRuoyu/gitk:
gitk: fix trackpad scrolling for Tcl/Tk 8.7+
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
In addition to the regular trace information produced by
CURLOPT_VERBOSE, recent curl versions can enable or disable tracing of
specific subsystems using a call to curl_global_trace().
This level of detail may or may not be useful for us in Git as mere
users of libcurl, but there's one case where we need it for a test. In
t5564, we set up a socks proxy, access it with GIT_TRACE_CURL set, and
expect to find socks-related messages in the output. This test is broken
in the release candidates for libcurl 8.16, as those socks messages are
no longer produced in the trace.
The problem bisects to curl's commit ab5e0bfddc (pytest: add SOCKS tests
and scoring, 2025-07-21). There the socks messages were moved from
generic infof() messages to the component-specific CURL_TRC_CF() system.
And so we do not see them by default, but only if "socks" is enabled as
a logging component.
Teach Git's http code to accept a component list from the
environment and pass it into curl_global_trace(). We can then use
that in the test to enable the correct component.
It should be safe to do so unconditionally. In older versions of curl
which don't support this call, setting the environment variable is a
noop. Likewise, any versions of curl which don't recognize the "socks"
component should silently ignore it. The manpage for curl_global_trace()
says this:
The config string is a list of comma-separated component names. Names
are case-insensitive and unknown names are ignored. The special name
"all" applies to all components. Names may be prefixed with '+' or '-'
to enable or disable detailed logging for a component.
The list of component names is not part of curl's public API. Names may
be added or disappear in future versions of libcurl. Since unknown
names are silently ignored, outdated log configurations does not cause
errors when upgrading libcurl. Given that, some names can be expected
to be fairly stable and are listed below for easy reference.
So this should let us make the test work on all versions without
worrying about confusing older (or newer) versions. For the same reason,
I've opted not to document this interface. This is deep internal voodoo
for which we can make no promises to users. In fact, I was tempted to
simply hard-code "socks" to let our test pass and not expose anything.
But I suspect a little run-time flexibility may come in handy in the
future when debugging or dealing with similar logging issues.
I also considered just putting "all" into such a hard-coded default. But
if you try it, you will see that many of the components are quite
verbose and likely not interesting. They would clutter up our trace
output if we enabled them by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
TIP 684 [1] introduced TouchpadScroll events in Tcl/Tk 8.7, separating
trackpad gestures from traditional MouseWheel events. This broke
trackpad scrolling in gitk where trackpads generate TouchpadScroll
events instead of MouseWheel events.
Fix that by adding TouchpadScroll event bindings for all scrollable
widgets following the TIP 684 specification. Implement a new
precisescrollval proc to handle the smaller delta values from
TouchpadScroll events, using appropriate scaling factors that seem
sensible on my MacBook.
Fixes https://github.com/j6t/gitk/issues/31.
[1]: https://core.tcl-lang.org/tips/doc/main/tip/684.md
Signed-off-by: Ruoyu Zhong <zhongruoyu@outlook.com>
|
|
"make -JN" with INCLUDE_LIBGIT_RS enabled causes cargo lock warnings
and can trigger ld errors during the build.
The build errors are caused by two inner "make" invocations getting
triggered concurrently: once inside of libgit-sys and another inside of
libgit-rs.
Make libgit-rs depend on libgit-sys so that "make" prevents them
from running concurrently. Apply the same logic to the test invocations.
Use cargo's "--manifest-path" option instead of "cd" in the recipes.
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our codebase uses a lot of bit field variables, generally to mark
boolean type variables. While there is a formatting rule in the
'.clang-format', there is no guideline specified in the
'CodingGuidelines'.
Since the '.clang-format' is not yet enforced, let's also add a
guideline with the same rule as mentioned in the '.clang-format', which
is to not use any spaces around the colon, like so:
unsigned my_field:1;
unsigned other_field:1;
unsigned field_with_longer_name:1;
This would allow us not to modify the clang-format file, and more
importantly, discourage people from doing ugly alignment with spaces,
i.e.
unsigned my_field : 1;
unsigned other_field : 1;
unsigned field_with_longer_name : 1;
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'aqua-ctxbut' of github.com:ZhongRuoyu/gitk:
gitk: use <Button-3> for ctx menus on macOS with Tcl 8.7+
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Earlier recommendation by IETF with RFC 2595 was to deprecate
implicit TLS in preference for upgrade an initially unencrypted
connection with STARTTLS command. These days, however, IETF
recommends that connections be made using "Implicit TLS", in
preference to STARTTLS and the like, completely reversing their
earlier position, in RFC8314.
Update the GMail example to use the implicit TLS to match the
current recommendation at port 465.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add some advice on how to change the config settings when
"core.commentString=auto" or "core.commentChar=auto". The advice
includes instructions for clearing the config setting or setting a
fixed comment string. To try and be as specific as possible, the advice
is customized based on the user's config. If "core.commentString=auto"
is set in the system config and the user does not have write
access then the advice omits the instructions to clear the config
and recommends changing the global config instead. An alternative
approach would be to advise the user to run "git config --show-origin"
and leave them to figure out how to fix it themselves but that seems
rather unfriendly. As we're forcing them to update their config we
should try and make that as easy as possible.
In order to generate this advice we need to record each file where
either of the config keys is set and whether a key occurs more that
once in a given file. This lets us generate the list of commands to
remove all the keys and also tells us which key the "auto" setting
comes from.
As we want the user to update their config we do not provide a way
for this advice to be disabled other than changing the value of
"core.commentChar" or "core.commentString".
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As support for this setting was deprecated in the last commit print a
warning (or die when WITH_BREAKING_CHANGES is enabled) if it is set.
Avoid bombarding the user with warnings by only printing it (a) when
running commands that call "git commit" and (b) only once per command.
Some scaffolding is added to repo_read_config() to allow it to
detect deprecated config settings and warn about them. As both
"core.commentChar" and "core.commentString" set the comment
character we record which one of them is used and tailor the
warning message appropriately.
Note the odd combination of die_message() followed by die(NULL)
is to allow the next commit to insert a call to advise() in the middle.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "core.commentString" is set to "auto" then "git commit" will
automatically select the comment character ensuring that it is not the
first character on any of the lines in the commit message. This was
introduced by commit 84c9dc2c5a2 (commit: allow core.commentChar=auto
for character auto selection, 2014-05-17). The motivation seems to be
to avoid commenting out lines from the existing message when amending
a commit that was created with a message from a file.
Unfortunately this feature does not work with:
* commit message templates that contain comments.
* prepare-commit-msg hooks that introduce comments.
* "git commit --cleanup=strip --edit -F <file>" which means that it
is incompatible with
- the "fixup" and "squash" commands of "git rebase -i" as the
comments added by those commands are then treated as part of
the commit message.
- the conflict comments added to the commit message by "git
cherry-pick", "git rebase" etc. as these comments are then
treated as part of the commit message.
It is also ignored by "git notes" when amending a note.
The issues with comments coming from a template, hook or file are a
consequence of the design of this feature and are therefore hard to
fix.
As the costs of this feature outweigh the benefits, deprecate it and
remove it in Git 3.0. If someone comes up with some patches that fix
all the issues in a maintainable way then I'd be happy to see this
change reverted.
The next commits will add a warning and some advice for users on how
they can update their config settings.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The compatibility object format is only implemented for loose objects,
not packed objects, so anyone attempting to push or fetch data into a
repository with this option will likely not see it work as expected. In
addition, the underlying storage of loose object mapping is likely to
change because the current format is inefficient and does not handle
important mapping information such as that of submodules.
It would have been preferable to initially document that this was not
yet ready for prime time, but we did not do so. We hinted at the fact
that this functionality is incomplete in the description, but did not
say so explicitly. Let's do so now: indicate that this feature is
incomplete and subject to change and that the option is not designed to
be used by end users.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using one of the start_delayed_*() functions, clients of the progress
API can request that a progress meter is only shown after some time.
To do that, the implementation intends to count down the number of
seconds stored in struct progress by observing flag progress_update,
which the timer interrupt handler sets when a second has elapsed. This
works during the first second of the delay. But the code forgets to
reset the flag to zero, so that subsequent calls of display_progress()
think that another second has elapsed and decrease the count again
until zero is reached. Due to the frequency of the calls, this happens
without an observable delay in practice, so that the effective delay is
always just one second.
This bug has been with us since the inception of the feature. Despite
having been touched on various occasions, such as 8aade107dd84
(progress: simplify "delayed" progress API), 9c5951cacf5c (progress:
drop delay-threshold code), and 44a4693bfcec (progress: create
GIT_PROGRESS_DELAY), the short delay went unnoticed.
Copy the flag state into a local variable and reset the global flag
right away so that we can detect the next clock tick correctly.
Since we have not had any complaints that the delay of one second is
too short nor that GIT_PROGRESS_DELAY is ignored, people seem to be
comfortable with the status quo. Therefore, set the default to 1 to
keep the current behavior.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new subcommand "git repo" gives users a way to grab various
repository characteristics.
* lo/repo-info:
repo: add the --format flag
repo: add the field layout.shallow
repo: add the field layout.bare
repo: add the field references.format
repo: declare the repo command
|
|
Remove dependency on the_repository and other globals from the
commit-graph code, and other changes unrelated to de-globaling.
* ps/commit-graph-wo-globals:
commit-graph: stop passing in redundant repository
commit-graph: stop using `the_repository`
commit-graph: stop using `the_hash_algo`
commit-graph: refactor `parse_commit_graph()` to take a repository
commit-graph: store the hash algorithm instead of its length
commit-graph: stop using `the_hash_algo` via macros
|
|
Docfix.
* ds/doc-count-objects-fix:
count-objects: document count-objects pack
|
|
Test clean-up.
* dk/t7005-editor-updates:
t7005: sanitize test environment for subsequent tests
t7005: stop abusing --exec-path
t7005: use modern test style
|
|
Doc lint updates to encourage the newer and easier-to-use
`synopsis` format, with fixes to a handful of existing uses.
* ja/doc-lint-sections-and-synopsis:
doc lint: check that synopsis manpages have synopsis inlines
doc:git-for-each-ref: fix styling and typos
doc: check for absence of the form --[no-]parameter
doc: check for absence of multiple terms in each entry of desc list
doc: check well-formedness of delimited sections
doc: test linkgit macros for well-formedness
|
|
"git diff-tree" learned "--max-depth" option.
* tc/diff-tree-max-depth:
diff: teach tree-diff a max-depth parameter
within_depth: fix return for empty path
combine-diff: zero memory used for callback filepairs
|
|
"git cmd --help-all" now works outside repositories.
* dk/help-all:
builtin: also setup gently for --help-all
parse-options: refactor flags for usage_with_options_internal
|
|
Revert back to “Git's” which was used before d30c5cc4592 (doc: convert
git-mergetool options to new synopsis style, 2025-05-25) accidentally
changed it.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch code tries to avoid asking the remote side for an object we
already have. It does this by traversing recent commits reachable from
our refs looking for matches. Commit 5d4cc78f72 (fetch-pack: die if in
commit graph but not obj db, 2024-11-05) introduced an extra check
there: if we think we have an object because it's in the commit graph,
we double-check that we actually have it in our object database with a
call to odb_has_object().
But that call does not pass any flags, and so the function won't call
reprepared_packed_git() if it does not find the object. That opens us up
to the usual race against some other process repacking the odb:
1. We scan the list of packs in objects/pack but haven't yet opened them.
2. Somebody else packs the object into a new pack (which we don't know
about), and deletes the old pack it was in.
3. Our odb_has_object() calls tries to open that old pack, but finds it
is gone. We declare that we don't have the object.
And this causes us to erroneously complain and abort the fetch, thinking
our commit-graph and object database are out of sync. Instead, we should
pass HAS_OBJECT_RECHECK_PACKED, which will add a new step:
4. We re-scan the pack directory again, find the new pack, and locate
the object.
Often the fetch code tries to avoid these kinds of re-scans if it's
likely that we won't have the object. If the other side has told us
about object X and we want to know if we have it, we'll skip the re-scan
(to avoid spending a lot of effort when there are many such objects). We
can accept the racy false negative in that case because the worst case
is that we ask the other side to send us the object.
But this is not one of those cases. These are objects which are
accessible from _our_ refs, and which we already found in the commit
graph file. We should have them, and if we don't, we'll die()
immediately. So the performance impact is negligible, and getting the
right answer is important.
There's no test here because it's inherently racy. In fact, I had
trouble even developing a minimal test. The problem seen in the wild can
be produced like this:
# Any git.git mirror which supports partial clones; I think this
# should work with any repo that contains submodules, but note that
# $obj below is specific to this repo
url=https://github.com/git/git.git
# This is a commit that is not at the tip of any branches (so after
# we have it, we'll still have some commits to fetch).
obj=cf6f63ea6bf35173e02e18bdc6a4ba41288acff9
git init
git fetch --filter=tree:0 $url $obj:refs/heads/foo
git checkout foo
git commit-graph write --reachable
git fetch $url
What happens here is that the initial fetch grabs that older commit (and
its ancestors) but no trees or blobs, and the subsequent checkout grabs
the necessary trees and blobs just for that commit. The final fetch
spawns a long sequence of child fetches due to fetch_submodules(), which
wants to check whether there have been any gitlink modifications which
should trigger a fetch of the related submodule (we'll leave aside the
irony that we did not even check out any submodules yet).
That series of fetches causes us to accumulate packs, which eventually
triggers background maintenance to run. That repacks all-into-one, and
the pack containing $obj goes away in favor of a new pack. And then the
fetch eventually fails with:
fatal: You are attempting to fetch cf6f63ea6bf35173e02e18bdc6a4ba41288acff9, which is in the commit graph file but
not in the object database.
In the scenario above, the race becomes likely because of the long
series of quick fetches. But I _think_ the bug is independent of partial
clones entirely, and you could run into the same thing with a single
fetch, some other process running "git repack" simultaneously, and a bit
of bad luck. I haven't been able to reproduce, though. I'm not sure if
that's because there's some mis-analysis above, or if the race window is
just small enough that it's hard to trigger.
At any rate, re-scanning here seems like an obviously correct thing to
do with no downside, and it does fix the partial-clone case shown above.
Reported-by: Дилян Палаузов <dilyan.palauzov@aegee.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are three tips how to compose a non-line-wrapped patch with
Thunderbird. The first one suggests use of an add-on. The one
referenced has long been superseded by a different one. Update the
link to the new one. Mention that additional configuration is
required to make the add-on work.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
