| Age | Commit message (Collapse) | Author | Lines |
|---|
|
`svn:global-ignores` contains a list of file patterns that should
not be tracked in version control. The syntax of these patterns is
the same as `svn:ignore`. Their semantics differ: patterns in
`svn:global-ignores` apply to all paths under the directory where
they apply, while `svn:ignore` only applies to the directory's
immediate children.
Signed-off-by: Alex Galvin <agalvin@comqi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Subversion 1.8 added a new property `svn:global-ignores`. It
contains a list of patterns used to determine what files should
be ignored. If Git-SVN is going to ignore these files as well, it
is important that we do not skip over directories that have this
property set.
Signed-off-by: Alex Galvin <agalvin@comqi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git 2.45.0 included the change b7d6f23a171 (midx-write.c: use
`--stdin-packs` when repacking, 2024-04-01) which caused the 'git
multi-pack-index repack' command to use 'git pack-objects --stdin-packs'
instead of listing the objects to repack. While this change was
motivated by efficient cross-process communication and the ability to
improve delta compression, it breaks a fundamental function of the
'incremental-repack' task that is enabled by default in Scalar clones or
Git repositories that run 'git maintenance start'.
The 'incremental-repack' task performs a two-step process of the
'expire' and 'repack' subcommands of the 'git multi-pack-index' builtin.
The 'expire' command removes any pack-files listed in the
multi-pack-index but without any referenced objects. The 'repack' task
then finds a batch of pack-files to repack and sends their objects to
'git pack-objects'. Both the pack-files chosen for the batch and the
objects chosen to repack are based on the ones that the multi-pack-index
references. Objects that appear in a pack-file but have a duplicate copy
in a newer pack-file are not considered in this case. Since the
multi-pack-index references only the newest copy of an object, this
allows the next 'incremental-repack' task to remove the pack-files in
the next 'expire' task. This delay is intentional due to how Windows
handles may block deletion of files with open read handles.
However, the mentioned commit changed this behavior to divorce the set
of objects referenced by the multi-pack-index and instead use a set of
"included" and "excluded" pack-files in the 'git pack-objects' builtin.
When a pack-file is selected as "included", only the objects it contains
but are not in any "excluded" pack-files are considered for repacking.
This has led to client repositories failing to remove old pack-files as
they still have some referenced objects. This grows over time until the
point that Git is trying to repack the same pack-files over and over.
For now, create a test case that demonstrates the expected behavior, but
also fails in its final line. The setup here it attempting to recreate a
typical situation for a repository that uses a blobless partial clone.
There would be a large initial pack-file from the clone that is never
selected in the 'repack' batch. There are other pack-files that have a
combination of new objects from incremental fetches and possibly blobs
that are not connected to those incremental fetches; these blobs could
be filled in from commands like 'git checkout' or 'git blame'. The
pack-files also have some overlap on purpose so test-1 has some
duplicates in test-2 and test-2 has some duplicates in test-3.
At the end of the test, the test-2 pack-file still exists though it
should have been expired. This test will pass when reverting the
offending commit.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix as a follow-up to an already graduated topic.
* jk/am-retry:
t4153: stop redirecting input from /dev/zero
|
|
Doc update.
* tb/pseudo-merge-reachability-bitmap:
Documentation/gitpacking: make sample configs listing blocks
|
|
Doc update.
* ps/pseudo-ref-terminology:
Documentation/glossary: fix double word
|
|
Doc update.
* tb/doc-max-tree-depth-fix:
Documentation: fix default value for core.maxTreeDepth
|
|
Comment fix.
* ch/refs-without-the-repository-fix:
refs: correct the version numbers in a comment
|
|
The uname_P make variable was added in commit e15f545155 ("Makefile
tweaks: Solaris 9+ dont need iconv / move up uname variables",
2006-02-20), but it seems to never have been used (even in that original
commit). The man page for 'uname' notes that the '-p' processor option
is non-portable (the 'uname_M' variable is used by the Makefile for that
purpose).
Remove the unused 'uname_P' make variable.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 1c96642326 ("sparse: allow '{ 0 }' to be used without warnings",
2020-05-22) added -Wno-universal-initializer to the SP_EXTRA_FLAGS in
order to suppress potential sparse warnings from using '{0}' as an
aggregate initializer. At that time, the default was for sparse to
issue warnings (i.e. the default was -Wuniversal-initializer) if such
an initializer was used to initialize an aggregate whose first member
was a pointer type. However, this default was changed just a few days
later to -Wno-universal-initializer (first released in sparse v0.6.2)
and has been so in all subsequent release versions of sparse. Thus,
including -Wno-universal-initializer in the SP_EXTRA_FLAGS variable is
redundant.
Remove the unnecessary warning flag from SP_EXTRA_FLAGS, essentially
reverting commit 1c96642326.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build fix.
* js/unit-test-oidtree-cmake-fix:
cmake: fix build of `t-oidtree`
|
|
"git var GIT_SHELL_PATH" should report the path to the shell used
to spawn external commands, but it didn't do so on Windows, which
has been corrected.
* js/var-git-shell-path:
var(win32): do report the GIT_SHELL_PATH that is actually used
run-command: declare the `git_shell_path()` function globally
run-command(win32): resolve the path to the Unix shell early
mingw(is_msys2_sh): handle forward slashes in the `sh.exe` path, too
win32: override `fspathcmp()` with a directory separator-aware version
strvec: declare the `strvec_push_nodup()` function globally
run-command: refactor getting the Unix shell path into its own function
|
|
What happens when http.cookieFile gets the special value "" has
been clarified in the documentation.
* ps/doc-http-empty-cookiefile:
doc: update http.cookieFile with in-memory cookie processing
|
|
"git push '' HEAD:there" used to hit a BUG(); it has been corrected
to die with "fatal: bad repository ''".
* kn/push-empty-fix:
builtin/push: call set_refspecs after validating remote
|
|
The http.cookieFile and http.saveCookies configuration variables
have a few values that need to be avoided, which are now ignored
with warning messages.
* jc/http-cookiefile:
http.c: cookie file tightening
|
|
The test framework learned to take the test body not as a single
string but as a here-document.
* jk/test-body-in-here-doc:
t/.gitattributes: ignore whitespace in chainlint expect files
t: convert some here-doc test bodies
test-lib: allow test snippets as here-docs
chainlint.pl: add tests for test body in heredoc
chainlint.pl: recognize test bodies defined via heredoc
chainlint.pl: check line numbers in expected output
chainlint.pl: force CRLF conversion when opening input files
chainlint.pl: do not spawn more threads than we have scripts
chainlint.pl: only start threads if jobs > 1
chainlint.pl: add test_expect_success call to test snippets
|
|
Tests that use GIT_TEST_SANITIZE_LEAK_LOG feature got their exit
status inverted, which has been corrected.
* rj/test-sanitize-leak-log-fix:
test-lib: GIT_TEST_SANITIZE_LEAK_LOG enabled by default
test-lib: fix GIT_TEST_SANITIZE_LEAK_LOG
|
|
When `core.maxTreeDepth` was originally introduced via be20128bfa (add
core.maxTreeDepth config, 2023-08-31), its default value was 4096.
There have since been a couple of updates to its default value that were
not reflected in the documentation for `core.maxTreeDepth`:
- 4d5693ba05 (lower core.maxTreeDepth default to 2048, 2023-08-31)
- b64d78ad02 (max_tree_depth: lower it for MSVC to avoid stack
overflows, 2023-11-01)
Commit 4d5693ba05 lowers the default to 2048 for platforms with smaller
stack sizes, and commit b64d78ad02 lowers the default even further when
Git is compiled with MSVC.
Neither of these changes were reflected in the documentation, which I
noticed while merging newer releases back into GitHub's private fork
(which contained the original implementation of `core.maxTreeDepth`).
Update the documentation to reflect what the platform-specific default
values are.
Noticed-by: Keith W. Campbell <keithc@ca.ibm.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a spurious "that".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This document contains a few sample config snippets. At least with
Asciidoctor, the section headers are rendered *more* indented than the
variables that follow:
[bitmapPseudoMerge "all"]
pattern = "refs/"
...
To address this, wrap these listings in AsciiDoc listing blocks. Remove
the indentation from the section headings. This is similar to how we
handle such sample config elsewhere, e.g., in config.txt.
While we're here, fix the nearby "wiht" typo.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 852a171018 (am: let command-line options override saved options,
2015-08-04) redirected a few "git am" invocations from /dev/zero, even
though it did not expect "am" to read the input. This was necessary at
the time because those tests used test_terminal, and as described in
18d8c26930 (test_terminal: redirect child process' stdin to a pty,
2015-08-04):
Note that due to the way the code is structured, the child's stdin
pseudo-tty will be closed when we finish reading from our stdin. This
means that in the common case, where our stdin is attached to /dev/null,
the child's stdin pseudo-tty will be closed immediately. Some operations
like isatty(), which git-am uses, require the file descriptor to be
open, and hence if the success of the command depends on such functions,
test_terminal's stdin should be redirected to a source with large amount
of data to ensure that the child's stdin is not closed, e.g.
test_terminal git am --3way </dev/zero
But we later dropped the use of test_terminal in 53ce2e3f0a (am: add
explicit "--retry" option, 2024-06-06). That commit dropped one of the
redirections from /dev/zero but not the other.
In theory the remaining one should not cause any problems, but it turns
out that at least one platform (NonStop) does not have /dev/zero at all.
We never noticed before because it also did not pass the TTY prereq,
meaning these tests were not run at all there until 53ce2e3f0a.
So let's drop the useless /dev/zero mention. There are others in the
test suite, but they are run only for tests marked with EXPENSIVE (so
not typically by default).
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During Git 2.35 timeframe, daf1d828 (reflog expire: don't use
lookup_commit_reference_gently(), 2021-12-22) replaced a call to
lookup_commit_reference_gently() with a call to lookup_commit().
What it failed to consider was that our refs do not necessarily
point at commits (most notably, we have annotated and signed tags),
and more importantly that lookup_commit() does not dereference a tag
to return a commit; instead it returns NULL when a tag is given.
Since the commit returned is used as a starting point for the
reachability check, this ejected the commits that are reachable only
by an annotated tag out of the set of reachable commits, breaking
the computation to correctly implement the "--expire-unreachable"
option. We also started giving an error message that the API
function expected to be fed a commit object.
This problem hasn't been reported or noticed for a long time,
probably because the "refs/tags/" hierarchy by default is not
covered by reflogs, as nobody usually moves tags.
Revert the change to correctly find the commit pointed at by the ref
to restore the previous behaviour, but do so only in a more modern
codebase, as we had significant code churn since then and it is not
grave enough to worry about for older maintenance tracks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A handful of entries are added to the GitFAQ document.
* bc/gitfaq-more:
doc: mention that proxies must be completely transparent
gitfaq: add entry about syncing working trees
gitfaq: give advice on using eol attribute in gitattributes
gitfaq: add documentation on proxies
|
|
The http transport can now be told to send request with
authentication material without first getting a 401 response.
* bc/http-proactive-auth:
http: allow authenticating proactively
|
|
Shell script clean-up.
* jc/where-is-bash-for-ci:
ci: unify bash calling convention
|
|
A new warning message is issued when a command has to expand a
sparse index to handle working tree cruft that are outside of the
sparse checkout.
* ds/advice-sparse-index-expansion:
advice: warn when sparse index expands
|
|
Address-looking strings found on the trailer are now placed on the
Cc: list after running through sanitize_address by "git send-email".
* cb/send-email-sanitize-trailer-addresses:
git-send-email: use sanitized address when reading mbox body
|
|
The "ort" merge backend saw one bugfix for a crash that happens
when inner merge gets killed, and assorted code clean-ups.
* en/ort-inner-merge-error-fix:
merge-ort: fix missing early return
merge-ort: convert more error() cases to path_msg()
merge-ort: upon merge abort, only show messages causing the abort
merge-ort: loosen commented requirements
merge-ort: clearer propagation of failure-to-function from merge_submodule
merge-ort: fix type of local 'clean' var in handle_content_merge ()
merge-ort: maintain expected invariant for priv member
merge-ort: extract handling of priv member into reusable function
|
|
Cast i from size_t to uintmax_t to match the format string.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The paragraph talks about a change made in c8f815c2 (refs: remove
functions without ref store, 2024-05-07), which is v2.46.0-rc0~119^2
and will be published as part of v2.46, not v2.45.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `githooks` documentation mentions that the post-receive hook
executes once after git-receive-pack(1) updates all references and that
it also receives the same information as the pre-receive hook on
standard input. This is misleading though because the hook only
executes once if at least one of the attempted reference updates is
successful. Also, while each line provided on standard input is in the
same format as the pre-receive hook, the information received only
includes the set of references that were successfully updated.
Update the documentation to clarify these points and also provide a
reference to the post-receive hook section of the `git-receive-pack`
documentation which has additional information.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The scripted Porcelain commands do not allow use of "local" because
it is not universally supported, but we use it liberally in our test
scripts, which means some POSIX compliant shells (like "ksh93") can
not be used to run our tests.
Document the status quo, to help the next person who gets perplexed
seeing our tests fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A test in reftable library has been rewritten using the unit test
framework.
* cp/unit-test-reftable-record:
t-reftable-record: add tests for reftable_log_record_compare_key()
t-reftable-record: add tests for reftable_ref_record_compare_name()
t-reftable-record: add index tests for reftable_record_is_deletion()
t-reftable-record: add obj tests for reftable_record_is_deletion()
t-reftable-record: add log tests for reftable_record_is_deletion()
t-reftable-record: add ref tests for reftable_record_is_deletion()
t-reftable-record: add comparison tests for obj records
t-reftable-record: add comparison tests for index records
t-reftable-record: add comparison tests for ref records
t-reftable-record: add reftable_record_cmp() tests for log records
t: move reftable/record_test.c to the unit testing framework
|
|
"git push" that pushes only deletion gave an unnecessary and
harmless error message when push negotiation is configured, which
has been corrected.
* jc/disable-push-nego-for-deletion:
push: avoid showing false negotiation errors
|
|
Docfix.
* ri/doc-show-branch-fix:
doc: fix the max number of branches shown by "show-branch"
|
|
Developer build procedure fix.
* tb/dev-build-pedantic-fix:
config.mak.dev: fix typo when enabling -Wpedantic
|
|
Custom control structures we invented more recently have been
taught to the clang-format file.
* rs/clang-format-updates:
clang-format: include kh_foreach* macros in ForEachMacros
|
|
GitWeb update to use committer date consistently in rss/atom feeds.
* am/gitweb-feed-use-committer-date:
gitweb: rss/atom change published/updated date to committer date
|
|
Test suite has been taught not to unnecessarily rely on DNS failing
a bogus external name.
* jk/tests-without-dns:
t/lib-bundle-uri: use local fake bundle URLs
t5551: do not confirm that bogus url cannot be used
t5553: use local url for invalid fetch
|
|
An existing test of oidmap API has been rewritten with the
unit-test framework.
* gt/unit-test-oidmap:
t: migrate helper/test-oidmap.c to unit-tests/t-oidmap.c
|
|
"git describe --dirty --broken" forgot to refresh the index before
seeing if there is any chang, ("git describe --dirty" correctly did
so), which has been corrected.
* as/describe-broken-refresh-index-fix:
describe: refresh the index when 'broken' flag is used
|
|
A test that no longer leaks has been marked as such.
* rj/t0613-no-longer-leaks:
t0613: mark as leak-free
|
|
A test that no longer leaks has been marked as such.
* rj/t0612-no-longer-leaks:
t0612: mark as leak-free
|
|
The macro check_strvec calls the function check_strvec_loc(), which
performs the actual checks. They report the line number inside that
function on error, which is not very helpful. Before the previous
patch half of them triggered an assertion that reported the caller's
line number using a custom message, which was more useful, but a bit
awkward.
Improve the output by getting rid of check_strvec_loc() and performing
all checks within check_strvec, as they then report the line number of
the call site, aiding in finding the broken test. Determine the number
of items and check it up front to avoid having to do them both in the
loop and at the end.
Sanity check the expected items to make sure there are any and that the
last one is NULL, as the compiler no longer does that for us with the
removal of the function attribute LAST_ARG_MUST_BE_NULL.
Use only the actual strvec name passed to the macro, the internal
"expect" array name and an index "i" in the output, for clarity. While
"expect" does not exist at the call site, it's reasonably easy to infer
that it's referring to the NULL-terminated list of expected strings,
converted to an array.
Here's the output with less items than expected in the strvec before:
# check "vec->nr > nr" failed at t/unit-tests/t-strvec.c:19
# left: 1
# right: 1
... and with the patch:
# check "(&vec)->nr == ARRAY_SIZE(expect) - 1" failed at t/unit-tests/t-strvec.c:53
# left: 1
# right: 2
With too many items in the strvec we got before:
# check "vec->nr == nr" failed at t/unit-tests/t-strvec.c:34
# left: 1
# right: 0
# check "vec->v[nr] == NULL" failed at t/unit-tests/t-strvec.c:36
# left: 0x6000004b8010
# right: 0x0
... and with the patch:
# check "(&vec)->nr == ARRAY_SIZE(expect) - 1" failed at t/unit-tests/t-strvec.c:53
# left: 1
# right: 0
A broken alloc value was reported like this:
# check "vec->alloc > nr" failed at t/unit-tests/t-strvec.c:20
# left: 0
# right: 0
... and with the patch:
# check "(&vec)->nr <= (&vec)->alloc" failed at t/unit-tests/t-strvec.c:56
# left: 2
# right: 0
An unexpected string value was reported like this:
# check "!strcmp(vec->v[nr], str)" failed at t/unit-tests/t-strvec.c:24
# left: "foo"
# right: "bar"
# nr: 0
... and with the patch:
# check "!strcmp((&vec)->v[i], expect[i])" failed at t/unit-tests/t-strvec.c:53
# left: "foo"
# right: "bar"
# i: 0
If the strvec is not NULL terminated, we got:
# check "vec->v[nr] == NULL" failed at t/unit-tests/t-strvec.c:36
# left: 0x102c3abc8
# right: 0x0
... and with the patch we get the line number of the caller:
# check "!strcmp((&vec)->v[i], expect[i])" failed at t/unit-tests/t-strvec.c:53
# left: "bar"
# right: NULL
# i: 1
check_strvec calls without a trailing NULL were detected at compile time
before:
t/unit-tests/t-strvec.c:71:2: error: missing sentinel in function call [-Werror,-Wsentinel]
... and with the patch it's only found at runtime:
# check "expect[ARRAY_SIZE(expect) - 1] == NULL" failed at t/unit-tests/t-strvec.c:53
# left: 0x100e5a663
# right: 0x0
We can let check_strvec add the terminating NULL for us and remove it
from callers, making it impossible to forget. Leave that conversion for
a future patch, though, since this reimplementation is already intrusive
enough.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation claims that "recursive defaults to the diff.algorithm
config setting", but this is currently not the case. This fixes it,
ensuring that diff.algorithm is used when -Xdiff-algorithm is not
supplied. This affects the following porcelain commands: "merge",
"rebase", "cherry-pick", "pull", "stash", "log", "am" and "checkout".
It also affects the "merge-tree" ancillary interrogator.
This change refactors the initialization of merge options to introduce
two functions, "init_merge_ui_options" and "init_merge_basic_options"
instead of just one "init_merge_options". This design follows the
approach used in diff.c, providing initialization methods for
porcelain and plumbing commands respectively. Thanks to that, the
"replay" and "merge-recursive" plumbing commands remain unaffected by
diff.algorithm.
Signed-off-by: Antonin Delpeuch <antonin@delpeuch.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, Unix-like paths like `/bin/sh` make very little sense. In
the best case, they simply don't work, in the worst case they are
misinterpreted as absolute paths that are relative to the drive
associated with the current directory.
To that end, Git does not actually use the path `/bin/sh` that is
recorded e.g. when `run_command()` is called with a Unix shell
command-line. Instead, as of 776297548e (Do not use SHELL_PATH from
build system in prepare_shell_cmd on Windows, 2012-04-17), it
re-interprets `/bin/sh` as "look up `sh` on the `PATH` and use the
result instead".
This is the logic users expect to be followed when running `git var
GIT_SHELL_PATH`.
However, when 1e65721227 (var: add support for listing the shell,
2023-06-27) introduced support for `git var GIT_SHELL_PATH`, Windows was
not special-cased as above, which is why it outputs `/bin/sh` even
though that disagrees with what Git actually uses.
Let's fix this by using the exact same logic as `prepare_shell_cmd()`,
adjusting the Windows-specific `git var GIT_SHELL_PATH` test case to
verify that it actually finds a working executable.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
