| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The `struct add_p_opt` is reused both by our infra for "git add -p" and
"git add -i". Users of `run_add_i()` for example are expected to pass
`struct add_p_opt`. This is somewhat confusing and raises the question
of which options apply to what part of the stack.
But things are even more confusing than that: while callers are expected
to pass in `struct add_p_opt`, these options ultimately get used to
initialize a `struct add_i_state` that is used by both subsystems. So we
are basically going full circle here.
Refactor the code and split out a new `struct interactive_options` that
hosts common options used by both. These options are then applied to a
`struct interactive_config` that hosts common configuration.
This refactoring doesn't yet fully detangle the two subsystems from one
another, as we still end up calling `init_add_i_state()` in the "git add
-p" subsystem. This will be fixed in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "string-list" API function to find where a given string would
be inserted got updated so that it can use unrealistically huge
array index that would only fit in size_t but not int or ssize_t
to achieve unstated goal.
* sj/string-list:
refs: enable sign compare warnings check
string-list: change "string_list_find_insert_index" return type to "size_t"
string-list: replace negative index encoding with "exact_match" parameter
string-list: use bool instead of int for "exact_match"
|
|
As "string_list_find_insert_index" is a simple wrapper of
"get_entry_index" and the return type of "get_entry_index" is already
"size_t", we could simply change its return type to "size_t".
Update all callers to use size_t variables for storing the return value.
The tricky fix is the loop condition in "mailmap.c" to properly handle
"size_t" underflow by changing from `0 <= --i` to `i--`.
Remove "DISABLE_SIGN_COMPARE_WARNINGS" from "mailmap.c" as it's no
longer needed with the proper unsigned types.
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "string_list_find_insert_index()" function is used to determine
the correct insertion index for a new string within the string list.
The function also doubles up to convey if the string is already
existing in the list, this is done by returning a negative index
"-1 -index". Users are expected to decode this information. This
approach has several limitations:
1. It requires the callers to look into the detail of the function to
understand how to decode the negative index encoding.
2. Using int for indices can cause overflow issues when dealing with
large string lists.
To address these limitations, change the function to return size_t for
the index value and use a separate bool parameter to indicate whether
the index refers to an existing entry or an insertion point.
In some cases, the callers of "string_list_find_insert_index" only need
the index position and don't care whether an exact match is found.
However, "get_entry_index" currently requires a non-NULL "exact_match"
parameter, forcing these callers to declare unnecessary variables.
Let's allow callers to pass NULL for the "exact_match" parameter when
they don't need this information, reducing unnecessary variable
declarations in calling code.
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the diff code stores the decision about whether to show color as
a git_colorbool, and evaluates it at point-of-use with want_color().
This timing is important for reasons explained in daa0c3d971 (color:
delay auto-color decision until point of use, 2011-08-17).
The add-interactive code instead converts immediately to strict boolean
values using want_color(), and then evaluates those. This isn't wrong.
Even though we pass the bool values to diff_use_color(), which expects a
colorbool, the values are compatible. But it is unlike the rest of the
color code, and is questionable from a type-system perspective (but C's
typing between enums, ints, and bools is weak enough that the compiler
does not complain).
Let's switch it to the more usual way of calling want_color() at the
point of use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We traditionally used "int" to store and pass around the values defined
by "enum git_colorbool" (which were originally just #define macros).
Using an int doesn't produce incorrect results, but using the actual
enum makes the intent of the code more clear.
It would be nice if the compiler could catch cases where we used the
enum and an int interchangeably, since it's very easy to accidentally
check the boolean true/false of a colorbool like:
if (branch_use_color)
This is wrong because GIT_COLOR_UNKNOWN and GIT_COLOR_AUTO evaluate to
true in C, even though we may ultimately decide not to use color. But C
is pretty happy to convert between ints and enums (even with various
-Wenum-* warnings). So this sadly doesn't protect us from such mistakes,
but it hopefully does make the code easier to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long ago Git's decision to show color for a subsytem was stored in a
tri-state variable: it could be true (1), false (0), or unknown (-1).
But since daa0c3d971 (color: delay auto-color decision until point of
use, 2011-08-17) we want to carry around a new state, "auto", which
bases the decision on the tty-ness of stdout (rather than collapsing
that "auto" state to a true/false immediately).
That commit introduced a set of GIT_COLOR_* defines to represent each
state: UNKNOWN, ALWAYS, NEVER, and AUTO. But it only used the AUTO
value, and left alone code using bare 0/1/-1 values. And of course since
then we've grown many new spots that use those bare values.
Let's switch all of these to use the named constants. That should make
the code a bit easier to read, as it is more obvious that we're
representing a color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Color options like color.interactive and color.diff should fall back to
the value of color.ui if they aren't set. In add-interactive, we check
the specific options (e.g., color.diff) via repo_config_get_value(),
which does not depend on the main command having loaded any color config
via the git_config() callback mechanism.
But then we call want_color() on the result; if our specific config is
unset then that function uses the value of git_use_color_default. That
variable is typically set from color.ui by the git_color_config()
callback, which is called by the main command in its own git_config()
callback function.
This works fine for "add -p", whose add_config() callback calls into
git_color_config(). But it doesn't work for other commands like
"checkout -p", which is otherwise unaware of color at all. People tend
not to notice because the default is "auto", and that's what they'd set
color.ui to as well. But something like:
git -c color.ui=false checkout -p
should disable color, and it doesn't.
This regression goes back to 0527ccb1b5 (add -i: default to the built-in
implementation, 2021-11-30). In the perl version we got the color config
from "git config --get-colorbool", which did the full lookup for us.
The obvious fix is for git-checkout to add a call to git_color_config()
to its own config callback. But we'd have to do so for every command
with this problem, which is error-prone. Let's see if we can fix it more
centrally.
It is tempting to teach want_color() to look up the value of
repo_config_get_value("color.ui") itself. But I think that would have
disastrous consequences. Plumbing commands, especially older ones, avoid
porcelain config like "color.*" by simply not parsing it in their config
callbacks. Looking up the value of color.ui under the hood would
undermine that.
Instead, let's do that lookup in the add-interactive setup code. We're
already demand-loading other color config there, which is probably fine
(even in a plumbing command like "git reset", the interactive mode is
inherently porcelain-ish). That catches all commands that use the
interactive code, whether they were calling git_color_config()
themselves or not.
Reported-by: Isaac Oscar Gariano <isaacoscar@live.com.au>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old perl git-add--interactive.perl script used the color.diff config
option to decide whether to color diffs (and if not set, it fell back to
the value of color.ui via git-config's --get-colorbool option). When we
switched to the builtin version, this was lost: we respect only
color.ui. So for example:
git -c color.diff=false add -p
would color the diff, even when it should not.
The culprit is this line in add-interactive.c's parse_diff():
if (want_color_fd(1, -1))
That "-1" means "no config has been set", which causes it to fall back
to the color.ui setting. We should instead be passing the value of
color.diff. But the problem is that we never even parse that config
option!
Instead the builtin interactive code parses only the value of
color.interactive, which is used for prompts and other messages. One
could perhaps argue that this should cover interactive diff coloring,
too, but historically it did not. The perl script treated
color.interactive and color.diff separately. So we should grab the
values for both, keeping separate fields in our add_i_state variable,
rather than a single use_color field.
We also load individual color slots (e.g., color.interactive.prompt),
leaving them as the empty string when color is disabled. This happens
via the init_color() helper in add-interactive, which checks that
use_color field. Now that there are two such fields, we need to pass the
appropriate one for each color.
The colors are mostly easy to divide up; color.interactive.* follows
color.interactive, and color.diff.* follows color.diff. But the "reset"
color is tricky. It is used for both types of coloring, but the two can
be configured independently. So we introduce two separate reset colors,
and use each in the appropriate spot.
There are two new tests. The first enables interactive prompt colors but
disables color.diff. We should see a colored prompt but not a colored
diff, showing that we are now respecting color.diff (and not
color.interactive or color.ui).
The second does the opposite. We disable color.interactive but turn on
color.diff with a custom fragment color. When we split a hunk, the
interactive code has to re-color the hunk header, which lets us check
that we correctly loaded the color.diff.frag config based on color.diff,
not color.interactive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch compliments the previous commit, where builtins that use
add-patch infrastructure now respect diff.context and
diff.interHunkContext file configurations.
In particular, this patch helps users who don't want to set persistent
context configurations or just want a way to override them on a one-time
basis, by allowing the relevant builtins to accept corresponding command
line options that override the file configurations.
This mimics commands such as diff and log, which allow for both context
file configuration and command line overrides.
Signed-off-by: Leon Michalak <leonmichalak6@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various builtins that use add-patch infrastructure do not respect
the user's diff.context and diff.interHunkContext file configurations.
The user may be used to seeing their diffs with customized context size,
but not in the patches "git add -p" shows them to pick from.
Teach add-patch infrastructure to read these configuration variables and
pass their values when spawning the underlying plumbing commands as
their command line option.
Signed-off-by: Leon Michalak <leonmichalak6@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "add-interactive" subsystem by
reusing the repository we already have available via parameters or in
the `add_i_state` structure.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `empty_tree_oid_hex()` function use `the_repository` to derive the
hash function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
While at it, remove the unused `empty_blob_oid_hex()` function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug a leak we have since ab1e1cccaf (built-in add -i: re-implement
`add-untracked` in C, 2019-11-29).
This leak can be triggered with:
$ echo a | git add -i
As a curiosity, we have a somewhat similar function in builtin/stash.c,
which correctly frees the memory.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unused parameters to functions are marked as such, and/or removed,
in order to bring us closer to -Wunused-parameter clean.
* jk/unused-post-2.42: (22 commits)
update-ref: mark unused parameter in parser callbacks
gc: mark unused descriptors in scheduler callbacks
bundle-uri: mark unused parameters in callbacks
fetch: mark unused parameter in ref_transaction callback
credential: mark unused parameter in urlmatch callback
grep: mark unused parmaeters in pcre fallbacks
imap-send: mark unused parameters with NO_OPENSSL
worktree: mark unused parameters in noop repair callback
negotiator/noop: mark unused callback parameters
add-interactive: mark unused callback parameters
grep: mark unused parameter in output function
test-trace2: mark unused argv/argc parameters
trace2: mark unused config callback parameter
trace2: mark unused us_elapsed_absolute parameters
stash: mark unused parameter in diff callback
ls-tree: mark unused parameter in callback
commit-graph: mark unused data parameters in generation callbacks
worktree: mark unused parameters in each_ref_fn callback
pack-bitmap: mark unused parameters in show_object callback
ref-filter: mark unused parameters in parser callbacks
...
|
|
The interactive commands are dispatched from a table of abstract
pointers, but not every command uses every parameter it receives. Mark
the unused ones to silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many callers of run_diff_index() passed literal "1" for the option
flag word, which should better be spelled out as DIFF_INDEX_CACHED
for readablity. Everybody else passes "0" that can stay as-is.
The other bit in the option flag word is DIFF_INDEX_MERGE_BASE, but
curiously there is only one caller that can pass it, which is "git
diff-index --merge-base" itself---no internal callers uses the
feature.
A bit tricky call to the function is in builtin/submodule--helper.c
where the .cached member in a private struct is set/reset as a plain
Boolean flag, which happens to be "1" and happens to match the value
of DIFF_INDEX_CACHED.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files depended upon various
things that oidset included, but had omitted the direct #include for
those headers. Add those now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already have a preload-index.c file; move the declarations for the
functions in that file into a new preload-index.h. These were
previously split between cache.h and repository.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
As can easily be seen from grepping in our sources, we had these uses
of "the_repository" in various library code in cases where the
function in question was already getting a "struct repository *"
argument. Let's use that argument instead.
Out of these changes only the changes to "cache-tree.c",
"commit-reach.c", "shallow.c" and "upload-pack.c" would have cleanly
applied before the migration away from the "repo_*()" wrapper macros
in the preceding commits.
The rest aren't new, as we'd previously implicitly refer to
"the_repository", but it's now more obvious that we were doing the
wrong thing all along, and should have used the parameter instead.
The change to change "get_index_format_default(the_repository)" in
"read-cache.c" to use the "r" variable instead should arguably have
been part of [1], or in the subsequent cleanup in [2]. Let's do it
here, as can be seen from the initial code in [3] it's not important
that we use "the_repository" there, but would prefer to always use the
current repository.
This change excludes the "the_repository" use in "upload-pack.c"'s
upload_pack_advertise(), as the in-flight [4] makes that change.
1. ee1f0c242ef (read-cache: add index.skipHash config option,
2023-01-06)
2. 6269f8eaad0 (treewide: always have a valid "index_state.repo"
member, 2023-01-17)
3. 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13)
4. <Y/hbUsGPVNAxTdmS@coredump.intra.peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"revision.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The discard_index() function has not returned non-zero since
7a51ed66f65 (Make on-disk index representation separate from in-core
one, 2008-01-14), but we've had various code in-tree still acting as
though that might be the case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build argument list and environment of child processes by using
struct child_process and populating its members "args" and "env"
directly instead of maintaining separate strvecs and letting
run_command_v_opt() and friends populate these members. This is
simpler, shorter and slightly more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b240347543 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hashmap comparison functions must conform to a particular callback
interface, but many don't use all of their parameters. Especially the
void cmp_data pointer, but some do not use keydata either (because they
can easily form a full struct to pass when doing lookups). Let's mark
these to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite of "git add -i" in C that appeared in Git 2.25 didn't
correctly record a removed file to the index, which was fixed.
* js/add-i-delete:
add --interactive: allow `update` to stage deleted files
|
|
The scripted version of `git add -i` used `git update-index --add
--remove`, but the built-in version implemented only the `--add` part.
This fixes https://github.com/msys2/MSYS2-packages/issues/3066
Reported-by: Christoph Reiter <reiter.christoph@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the the release_revisions() function so that it frees the
"prune_data" in the "struct rev_info". This means that any code that
calls "release_revisions()" already can get rid of adjacent calls to
clear_pathspec().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a release_revisions() to various users of "struct rev_list" in
those straightforward cases where we only need to add the
release_revisions() call to the end of a block, and don't need to
e.g. refactor anything to use a "goto cleanup" pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The single-key interactive operation used by "git add -p" has been
made more robust.
* pw/single-key-interactive:
add -p: disable stdin buffering when interactive.singlekey is set
terminal: set VMIN and VTIME in non-canonical mode
terminal: pop signal handler when terminal is restored
terminal: always reset terminal when reading without echo
|
|
The builtin "add -p" reads the key "F2" as three separate keys "^[",
"O" and "Q". The "Q" causes it to quit which is probably not what the
user was expecting. This is because it uses poll() to check for
pending input when reading escape sequences but reads the input with
getchar() which is buffered by default and so hoovers up all the
pending input leading poll() think there isn't anything pending. Fix
this by calling setbuf() to disable input buffering if
interactive.singlekey is set.
Looking at the comment above mingw_getchar() in terminal.c I wonder if
that function is papering over this bug and could be removed.
Unfortunately I don't have access to windows to test that.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Have the diff_free() function call clear_pathspec(). Since the
diff_flush() function calls this all its callers can be simplified to
rely on it instead.
When I added the diff_free() function in e900d494dcf (diff: add an API
for deferred freeing, 2021-02-11) I simply missed this, or wasn't
interested in it. Let's consolidate this now. This means that any
future callers (and I've got revision.c in mind) that embed a "struct
diff_options" can simply call diff_free() instead of needing know that
it has an embedded pathspec.
This does fix a bunch of leaks, but I can't mark any test here as
passing under the SANITIZE=leak testing mode because in
886e1084d78 (builtin/: add UNLEAKs, 2017-10-01) an UNLEAK(rev) was
added, which plasters over the memory
leak. E.g. "t4011-diff-symlink.sh" would report fewer leaks with this
fix, but because of the UNLEAK() reports none.
I'll eventually loop around to removing that UNLEAK(rev) annotation as
I'll fix deeper issues with the revisions API leaking. This is one
small step on the way there, a new freeing function in revisions.c
will want to call this diff_free().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move various *_INIT macros to use designated initializers. This helps
readability. I've only picked those leftover macros that were not
touched by another in-flight series of mine which changed others, but
also how initialization was done.
In the case of SUBMODULE_ALTERNATE_SETUP_INIT I've left an explicit
initialization of "error_mode", even though
SUBMODULE_ALTERNATE_ERROR_IGNORE itself is defined as "0". Let's not
peek under the hood and assume that enum fields we know the value of
will stay at "0".
The change to "TESTSUITE_INIT" in "t/helper/test-run-command.c" was
part of an earlier on-list version[1] of c90be786da9 (test-tool
run-command: fix flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/xcalloc-takes-nelem-first:
fix xcalloc() argument order
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass the number of elements first and ther size second, as expected
by xcalloc(). Provide a semantic patch, which was actually used to
generate the rest of this patch.
The semantic patch would generate flip-flop diffs if both arguments
are sizeofs. We don't have such a case, and it's hard to imagine
the usefulness of such an allocation. If it ever occurs then we
could deal with it by duplicating the rule in the semantic patch to
make it cancel itself out, or we could change the code to use
CALLOC_ARRAY.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -i" failed to honor custom colors configured to show
patches, which has been corrected.
* js/add-i-color-fix:
add -i: verify in the tests that colors can be overridden
add -p: prefer color.diff.context over color.diff.plain
add -i (Perl version): color header to match the C version
add -i (built-in): use the same indentation as the Perl version
add -p (built-in): do not color the progress indicator separately
add -i (built-in): use correct names to load color.diff.* config
add -i (built-in): prevent the `reset` "color" from being configured
add -i: use `reset_color` consistently
add -p (built-in): imitate `xdl_format_hunk_hdr()` generating hunk headers
add -i (built-in): send error messages to stderr
add -i (built-in): do show an error message for incorrect inputs
|
|
Git's diff machinery allows users to override the colors to use in
diffs, even the plain-colored context lines. As of 8dbf3eb6850 (diff.h:
rename DIFF_PLAIN color slot to DIFF_CONTEXT, 2015-05-27), the preferred
name of the config setting is `color.diff.context`, although Git still
allows `color.diff.plain`.
In the context of `git add -p`, this logic is a bit hard to replicate:
`git_diff_basic_config()` reads all config values sequentially and if it
sees _any_ `color.diff.context` or `color.diff.plain`, it accepts the
new color. The Perl version of `git add -p` needs to go through `git
config --get-color`, though, which allows only one key to be specified.
The same goes for the built-in version of `git add -p`, which has to go
through `repo_config_get_value()`.
The best we can do here is to look for `.context` and if none is found,
fall back to looking for `.plain`, and if still not found, fall back to
the hard-coded default (which in this case is simply the empty string,
as context lines are typically rendered without colored).
This still leads to inconsistencies when both config names are used: the
initial diff will be colored by the diff machinery. Once edited by a
user, a hunk has to be re-colored by `git add -p`, though, which would
then use the other setting to color the context lines.
In practice, this is not _all_ that bad. The `git config` manual says
this in the `color.diff.<slot>`:
`context` (context text - `plain` is a historical synonym)
We should therefore assume that users use either one or the other, but
not both names. Besides, it is relatively uncommon to look at a hunk
after editing it because it is immediately staged by default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When copying the spaces used to indent non-flat lists in `git add -i`,
one space was appended by mistake. This makes the output of the built-in
version of `git add -i` inconsistent with the Perl version. Let's adjust
the built-in version to produce the same output as the Perl version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The builtin version of add-interactive mistakenly loads diff colors from
color.interactive.* instead of color.diff.*. It also accidentally spells
`frag` as `fraginfo`.
Let's fix that.
Note also that we don't respect the historical `diff.color.*`. The perl
version never did, and those have been deprecated since 2007.
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
