| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "linux-gcc-default" job is mostly doing the same as the "linux-gcc"
job, except for a couple of minor differences:
- We use an explicit GCC version instead of the default version
provided by the distribution. We have other jobs that test with
"gcc-8", making this distinction pointless.
- We don't set up the Python version explicitly, and instead use the
default Python version. Python 2 has been end-of-life for quite a
while now though, making this distinction less interesting.
- We set up the default branch name to be "main" in "linux-gcc". We
have other testcases that don't and also some that explicitly use
"master".
- We use "ubuntu:20.04" in one job and "ubuntu:latest" in another. We
already have a couple other jobs testing these respectively.
So overall, the job does not add much to our test coverage.
Drop the "linux-gcc-default" job and adapt "linux-gcc" to start using
the default GCC compiler, effectively merging those two jobs into one.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support for Azure Pipelines has been retired in 6081d3898f (ci: retire
the Azure Pipelines definition, 2020-04-11) in favor of GitHub Actions.
Our CI library still has some infrastructure left for Azure though that
is now unused. Remove it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With c85bcb5de1 (gitlab-ci: switch from Ubuntu 16.04 to 20.04,
2024-10-31) we have adapted the last CI job to stop using Ubuntu 16.04
in favor of Ubuntu 20.04. Remove the special-casing we still have in our
CI scripts.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add another job to GitLab CI that tests against the i386 architecture.
This job is equivalent to the same job in GitHub Workflows.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We explicitly list the distro of Linux-based jobs, but it is equivalent
to the name of the image in almost all cases, except that colons are
replaced with dashes. Drop the redundant information and massage it in
our CI scripts, which is equivalent to how we do it in GitLab CI.
There are a couple of exceptions:
- The "linux32" job, whose distro name is different than the image
name. This is handled by adapting all sites to use the new name.
- The "alpine" and "fedora" jobs, neither of which specify a tag for
their image. This is handled by adding the "latest" tag.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The containerized jobs in GitHub Actions run as root, giving them
special permissions to for example delete files even when the user
shouldn't be able to due to file permissions. This limitation keeps us
from using containerized jobs for most of our Ubuntu-based jobs as it
causes a number of tests to fail.
Adapt the jobs to create a separate user that executes the test suite.
This follows similar infrastructure that we already have in GitLab CI.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CI jobs that run threaded programs under LSan has been giving false
positives from time to time, which has been worked around.
This is an alternative to the jk/lsan-race-with-barrier topic with
much smaller change to the production code.
* jk/lsan-race-ignore-false-positive:
test-lib: ignore leaks in the sanitizer's thread code
test-lib: check leak logs for presence of DEDUP_TOKEN
test-lib: simplify leak-log checking
test-lib: rely on logs to detect leaks
Revert barrier-based LSan threading race workaround
|
|
The extra "barrier" approach was too much code whose sole purpose
was to work around a race that is not even ours (i.e. in LSan's
teardown code).
In preparation for queuing a solution taking a much-less-invasive
approach, let's revert them.
|
|
CI jobs that run threaded programs under LSan has been giving false
positives from time to time, which has been worked around.
* jk/lsan-race-with-barrier:
grep: work around LSan threading race with barrier
index-pack: work around LSan threading race with barrier
thread-utils: introduce optional barrier type
Revert "index-pack: spawn threads atomically"
test-lib: use individual lsan dir for --stress runs
|
|
An earlier "csum-file checksum does not have to be computed with
sha1dc" topic had a few code paths that had initialized an
implementation of a hash function to be used by an unmatching hash
by mistake, which have been corrected.
* ps/weak-sha1-for-tail-sum-fix:
ci: exercise unsafe OpenSSL backend
builtin/fast-import: fix segfault with unsafe SHA1 backend
bulk-checkin: fix segfault with unsafe SHA1 backend
|
|
In the preceding commit we have fixed a segfault when using an unsafe
SHA1 backend that is different from the safe one. This segfault only
went by unnoticed because we never set up an unsafe backend in our CI
systems. Fix this ommission by setting `OPENSSL_SHA1_UNSAFE` in our
TEST-vars job.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One thread primitive we don't yet support is a barrier: it waits for all
threads to reach a synchronization point before letting any of them
continue. This would be useful for avoiding the LSan race we see in
index-pack (and other places) by having all threads complete their
initialization before any of them start to do real work.
POSIX introduced a pthread_barrier_t in 2004, which does what we want.
But if we want to rely on it:
1. Our Windows pthread emulation would need a new set of wrapper
functions. There's a Synchronization Barrier primitive there, which
was introduced in Windows 8 (which is old enough for us to depend
on).
2. macOS (and possibly other systems) has pthreads but not
pthread_barrier_t. So there we'd have to implement our own barrier
based on the mutex and cond primitives.
Those are do-able, but since we only care about avoiding races in our
LSan builds, there's an easier way: make it a noop on systems without a
native pthread barrier.
This patch introduces a "maybe_thread_barrier" API. The clunky name
(rather than just using pthread_barrier directly) should hopefully clue
people in that on some systems it will do nothing. It's wired to a
Makefile knob which has to be triggered manually, and we enable it for
the linux-leaks CI jobs (since we know we'll have it there).
There are some other possible options:
- we could turn it on all the time for Linux systems based on uname.
But we really only care about it for LSan builds, and there is no
need to add extra code to regular builds.
- we could turn it on only for LSan builds. But that would break
builds on non-Linux platforms (like macOS) that otherwise should
support sanitizers.
- we could trigger only on the combination of Linux and LSan together.
This isn't too hard to do, but the uname check isn't completely
accurate. It is really about what your libc supports, and non-glibc
systems might not have it (though at least musl seems to).
So we'd risk breaking builds on those systems, which would need to
add a new knob. Though the upside would be that running local "make
SANITIZE=leak test" would be protected automatically.
And of course none of this protects LSan runs from races on systems
without pthread barriers. It's probably OK in practice to protect only
our CI jobs, though. The race is rare-ish and most leak-checking happens
through CI.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The meson-build procedure is integrated into CI to catch and
prevent bitrotting.
* ps/ci-meson:
ci: wire up Meson builds
t: introduce compatibility options to clar-based tests
t: fix out-of-tree tests for some git-p4 tests
Makefile: detect missing Meson tests
meson: detect missing tests at configure time
t/unit-tests: rename clar-based unit tests to have a common prefix
Makefile: drop -DSUPPRESS_ANNOTATED_LEAKS
ci/lib: support custom output directories when creating test artifacts
|
|
GitLab CI updates.
* ps/ci-gitlab-update:
ci/lib: fix "CI setup" sections with GitLab CI
ci/lib: do not interpret escape sequences in `group ()` arguments
ci/lib: remove duplicate trap to end "CI setup" group
gitlab-ci: update macOS images to Sonoma
|
|
Build procedure update plus introduction of Meson based builds.
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
|
|
Backport oss-fuzz tests for us to our codebase.
* es/oss-fuzz:
fuzz: port fuzz-url-decode-mem from OSS-Fuzz
fuzz: port fuzz-parse-attr-line from OSS-Fuzz
fuzz: port fuzz-credential-from-url-gently from OSS-Fuzz
|
|
Wire up CI builds for both GitLab and GitHub that use the Meson build
system.
While the setup is mostly trivial, one gotcha is the test output
directory used to be in "t/", but now it is contained in the build
directory. To unify the logic across Makefile- and Meson-based builds we
explicitly set up the `TEST_OUTPUT_DIRECTORY` variable so that it is the
same for both build systems.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update `create_failed_test_artifacts ()` so that it can handle arbitrary
test output directories. This fixes creation of these artifacts for
macOS on GitLab CI, which uses a separate output directory already. This
will also be used by our out-of-tree builds with Meson.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Whenever we source "ci/lib.sh" we wrap the directives in a separate
group so that they can easily be collapsed in the web UI. And as we
source the script multiple times during a single CI run we thus end up
with the same section name reused multiple times, as well.
This is broken on GitLab CI though, where reusing the same group name is
not supported. The consequence is that only the last of these sections
can be collapsed.
Fix this issue by including the name of the sourcing script in the
group's name.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use printf to set up sections with GitLab CI, which requires us to
print a bunch of escape sequences via printf. The group name is
controlled by the user and is expanded directly into the formatting
string, which may cause problems in case the argument contains escape
sequences or formatting directives.
Fix this potential issue by using formatting directives to pass variable
data.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We exlicitly trap on EXIT in order to end the "CI setup" group. This
isn't necessary though given that `begin_group ()` already sets up the
trap for us.
Remove the duplicate trap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
|
|
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
|
|
Drop support for ancient environments in various CI jobs.
* bc/ancient-ci:
Add additional CI jobs to avoid accidental breakage
ci: remove clause for Ubuntu 16.04
gitlab-ci: switch from Ubuntu 16.04 to 20.04
|
|
Our "GIT-VERSION-GEN" script always writes the "GIT-VERSION-FILE" into
the current directory, where the expectation is that it should exist in
the source directory. But other build systems that support out-of-tree
builds may not want to do that to keep the source directory pristine,
even though CMake currently doesn't care.
Refactor the script such that it won't write the "GIT-VERSION-FILE"
directly anymore, but instead knows to replace @PLACEHOLDERS@ in an
arbitrary input file. This allows us to simplify the logic in CMake to
determine the project version, but can also be reused later on in order
to generate other files that need to contain version information like
our "git.rc" file.
While at it, change the format of the version file by removing the
spaces around the equals sign. Like this we can continue to include the
file in our Makefiles, but can also start to source it in shell scripts
in subsequent steps.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Over the last two releases we have plugged a couple hundred of memory
leaks exposed by the Git test suite. With the preceding commits we have
finally fixed the last leak exposed by our test suite, which means that
we are now basically leak free wherever we have branch coverage.
From hereon, the Git test suite should ideally stay free of memory
leaks. Most importantly, any test suite that is being added should
automatically be subject to the leak checker, and if that test does not
pass it is a strong signal that the added code introduced new memory
leaks and should not be accepted without further changes.
Drop the infrastructure around TEST_PASSES_SANITIZE_LEAK to reflect this
new requirement. Like this, all test suites will be subject to the leak
checker by default.
This is being intentionally strict, but we still have an escape hatch:
the SANITIZE_LEAK prerequisite. There is one known case in t5601 where
the leak sanitizer itself is buggy, so adding this prereq in such cases
is acceptable. Another acceptable situation is when a newly added test
uncovers preexisting memory leaks: when fixing that memory leak would be
sufficiently complicated it is fine to annotate and document the leak
accordingly. But in any case, the burden is now on the patch author to
explain why exactly they have to add the SANITIZE_LEAK prerequisite.
The TEST_PASSES_SANITIZE_LEAK annotations will be dropped in the next
patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofixes.
* ss/duplicate-typos:
global: Fix duplicate word typos
|
|
In general, we'd like to make sure Git works on the LTS versions of
major Linux distributions. To do that, let's add CI jobs for the oldest
regular (non-extended) LTS versions of the major distributions: Ubuntu
20.04, Debian 11, and RHEL 8. Because RHEL isn't available to the
public at no charge, use AlmaLinux, which is binary compatible with it.
Note that Debian does not offer the language-pack packages, but suitable
locale support can be installed with the locales-all package.
Otherwise, use the set of installation instructions which exist and are
most similar to the existing supported distros.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
We're no longer testing this version and it's well beyond regular LTS
support now, so remove the stanza for it from the case statement in our
CI code.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Enable Windows-based CI in GitLab.
* ps/ci-gitlab-windows:
gitlab-ci: exercise Git on Windows
gitlab-ci: introduce stages and dependencies
ci: handle Windows-based CI jobs in GitLab CI
ci: create script to set up Git for Windows SDK
t7300: work around platform-specific behaviour with long paths on MinGW
|
|
Used regex to find these typos:
(?<!struct )(?<=\s)([a-z]{1,}) \1(?=\s)
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Git's fuzz tests are run continuously as part of OSS-Fuzz [1]. Several
additional fuzz tests have been contributed directly to OSS-Fuzz;
however, these tests are vulnerable to bitrot because they are not built
during Git's CI runs, and thus breaking changes are much less likely to
be noticed by Git contributors.
Port one of these tests back to the Git project:
fuzz-url-decode-mem
This test was originally written by Eric Sesterhenn as part of a
security audit of Git [2]. It was then contributed to the OSS-Fuzz repo
in commit c58ac4492 (Git fuzzing: uncomment the existing and add new
targets. (#11486), 2024-02-21) by Jaroslav Lobačevski. I (Josh Steadmon)
have verified with both Eric and Jaroslav that they're OK with moving
this test to the Git project.
[1] https://github.com/google/oss-fuzz
[2] https://ostif.org/wp-content/uploads/2023/01/X41-OSTIF-Gitlab-Git-Security-Audit-20230117-public.pdf
Co-authored-by: Jaroslav Lobačevski <jarlob@gmail.com>
Co-authored-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Git's fuzz tests are run continuously as part of OSS-Fuzz [1]. Several
additional fuzz tests have been contributed directly to OSS-Fuzz;
however, these tests are vulnerable to bitrot because they are not built
during Git's CI runs, and thus breaking changes are much less likely to
be noticed by Git contributors.
Port one of these tests back to the Git project:
fuzz-parse-attr-line
This test was originally written by Eric Sesterhenn as part of a
security audit of Git [2]. It was then contributed to the OSS-Fuzz repo
in commit c58ac4492 (Git fuzzing: uncomment the existing and add new
targets. (#11486), 2024-02-21) by Jaroslav Lobačevski. I (Josh Steadmon)
have verified with both Eric and Jaroslav that they're OK with moving
this test to the Git project.
[1] https://github.com/google/oss-fuzz
[2] https://ostif.org/wp-content/uploads/2023/01/X41-OSTIF-Gitlab-Git-Security-Audit-20230117-public.pdf
Co-authored-by: Jaroslav Lobačevski <jarlob@gmail.com>
Co-authored-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Git's fuzz tests are run continuously as part of OSS-Fuzz [1]. Several
additional fuzz tests have been contributed directly to OSS-Fuzz;
however, these tests are vulnerable to bitrot because they are not built
during Git's CI runs, and thus breaking changes are much less likely to
be noticed by Git contributors.
Port one of these tests back to the Git project:
fuzz-credential-from-url-gently
This test was originally written by Eric Sesterhenn as part of a
security audit of Git [2]. It was then contributed to the OSS-Fuzz repo
in commit c58ac4492 (Git fuzzing: uncomment the existing and add new
targets. (#11486), 2024-02-21) by Jaroslav Lobačevski. I (Josh Steadmon)
have verified with both Eric and Jaroslav that they're OK with moving
this test to the Git project.
[1] https://github.com/google/oss-fuzz
[2] https://ostif.org/wp-content/uploads/2023/01/X41-OSTIF-Gitlab-Git-Security-Audit-20230117-public.pdf
Co-authored-by: Jaroslav Lobačevski <jarlob@gmail.com>
Co-authored-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The way AsciiDoc is used for SYNOPSIS part of the manual pages has
been revamped. The sources, at least for the simple cases, got
vastly pleasant to work with.
* ja/doc-synopsis-markup:
doc: apply synopsis simplification on git-clone and git-init
doc: update the guidelines to reflect the current formatting rules
doc: introduce a synopsis typesetting
|
|
We try to abstract away any differences between different CI platforms
in "ci/lib.sh", such that knowledge specific to e.g. GitHub Actions or
GitLab CI is neatly encapsulated in a single place. Next to some generic
variables, we also set up some variables that are specific to the actual
platform that the CI operates on, e.g. Linux or macOS.
We do not yet support Windows runners on GitLab CI. Unfortunately, those
systems do not use the same "CI_JOB_IMAGE" environment variable as both
Linux and macOS do. Instead, we can use the "OS" variable, which should
have a value of "Windows_NT" on Windows platforms.
Handle the combination of "$OS,$CI_JOB_IMAGE" and introduce support for
Windows.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to build and test Git, we have to first set up the Git for
Windows SDK, which contains various required tools and libraries. The
SDK is basically a clone of [1], but that repository is quite large due
to all the binaries it contains. We thus use both shallow clones and
sparse checkouts to speed up the setup. To handle this complexity we use
a GitHub action that is hosted externally at [2].
Unfortunately, this makes it rather hard to reuse the logic for CI
platforms other than GitHub Actions. After chatting with Johannes
Schindelin we came to the conclusion that it would be nice if the Git
for Windows SDK would regularly publish releases that one can easily
download and extract, thus moving all of the complexity into that single
step. Like this, all that a CI job needs to do is to fetch and extract
the resulting archive. This published release comes in the form of a new
"ci-artifacts" tag that gets updated regularly [3].
Implement a new script that knows how to fetch and extract that script
and convert GitHub Actions to use it.
[1]: https://github.com/git-for-windows/git-sdk-64/
[2]: https://github.com/git-for-windows/setup-git-for-windows-sdk/
[3]: https://github.com/git-for-windows/git-sdk-64/releases/tag/ci-artifacts/
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to follow the common manpage usage, the synopsis of the
commands needs to be heavily typeset. A first try was performed with
using native markup, but it turned out to make the document source
almost unreadable, difficult to write and prone to mistakes with
unwanted Asciidoc's role attributes.
In order to both simplify the writer's task and obtain a consistant
typesetting in the synopsis, a custom 'synopsis' paragraph type is
created and the processor for backticked text are modified. The
backends of asciidoc and asciidoctor take in charge to correctly add
the required typesetting.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CI updates
* jk/ci-linux32-update:
ci: add Ubuntu 16.04 job to GitLab CI
ci: use regular action versions for linux32 job
ci: use more recent linux32 image
ci: unify ubuntu and ubuntu32 dependencies
ci: drop run-docker scripts
|
|
In the preceding commits we had to convert the linux32 job to be based
on Ubuntu 20.04 instead of Ubuntu 16.04 due to a limitation in GitHub
Workflows. This was the only job left that still tested against this old
but supported Ubuntu version, and we have no other jobs that test with a
comparatively old Linux distribution.
Add a new job to GitLab CI that tests with Ubuntu 16.04 to cover the
resulting test gap. GitLab doesn't modify Docker images in the same way
GitHub does and thus doesn't fall prey to the same issue. There are two
compatibility issues uncovered by this:
- Ubuntu 16.04 does not support HTTP/2 in Apache. We thus cannot set
`GIT_TEST_HTTPD=true`, which would otherwise cause us to fail when
Apache fails to start.
- Ubuntu 16.04 cannot use recent JGit versions as they depend on a
more recent Java runtime than we have available. We thus disable
installing any kind of optional dependencies that do not come from
the package manager.
These two restrictions are fine though, as we only really care about
whether Git compiles and runs on such old distributions in the first
place.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Xenial image we're using was released more than 8 years ago. This is
a problem for using some recent GitHub Actions scripts, as they require
Node.js 20, and all of the binaries they ship need glibc 2.28 or later.
We're not using them yet, but moving forward prepares us for a future
patch which will.
Xenial was actually the last official 32-bit Ubuntu release, but you can
still find i386 images for more recent releases. This patch uses Focal,
which was released in 2020 (and is the oldest one with glibc 2.28).
There are two small downsides here:
- while Xenial is pretty old, it is still in LTS support until April
2026. So there's probably some value in testing with such an old
system, and we're losing that.
- there are no i386 subversion packages in the Focal repository. So we
won't be able to test that (OTOH, we had never tested it until the
previous patch which unified the 32/64-bit dependency code).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The script to install dependencies has two separate entries for 32-bit
and 64-bit Ubuntu systems. This increases the maintenance burden since
both should need roughly the same packages.
That hasn't been too bad so far because we've stayed on the same 32-bit
image since 2017. Trying to move to a newer image revealed several
problems with the linux32 job:
- newer images complain about using "linux32 --32bit i386", due to
seccomp restrictions. We can loosen these with a docker option, but
I don't think running it is even doing anything. We use it only for
pretending to "apt" that we're on a 32-bit machine, but inside the
container image apt is already configured as a 32-bit system (even
though the kernel outside the container is obviously 64-bit). Using
the same apt invocation for both architectures just gets rid of this
call entirely.
- we set DEBIAN_FRONTEND to avoid hanging on packages that ask the
user questions. This wasn't a problem on the old image, but it is on
newer ones. The 64-bit stanza handles this already.
As a bonus, the 64-bit stanza uses "apt -q" instead of redirecting
output to /dev/null. This would have saved me a lot of debugging
time trying to figure out why it was hanging. :)
- the old image seems to have zlib-dev installed by default, but newer
ones do not.
In addition, there were probably many tests being skipped on the 32-bit
build because we didn't have support packages installed (e.g., gpg). Now
we'll run them.
We do need to keep some parts split off just for 64-bit systems: our p4
and lfs installs reference x86_64/amd64 binaries. The downloaded jgit
should work in theory, since it's just a jar file embedded in a shell
script that relies on the system java. But the system java in our image
is too old, so I've left it as 64-bit only for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We haven't used these scripts since 4a6e4b9602 (CI: remove Travis CI
support, 2021-11-23), as the GitHub Actions config has support for
directly running jobs within docker containers.
It's possible we might want to resurrect something like this in order to
be more agnostic to the CI platform. But it's not clear exactly what it
would look like. And in the meantime, it's just a maintenance burden as
we make changes to CI config, and is subject to bitrot. In fact it's
already broken; it references ci/install-docker-dependencies.sh, which
went away in 9cdeb34b96 (ci: merge scripts which install dependencies,
2024-04-12).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Incremental updates of multi-pack index files.
* tb/incremental-midx-part-1:
midx: implement support for writing incremental MIDX chains
t/t5313-pack-bounds-checks.sh: prepare for sub-directories
t: retire 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
midx: implement verification support for incremental MIDXs
midx: support reading incremental MIDX chains
midx: teach `midx_fanout_add_midx_fanout()` about incremental MIDXs
midx: teach `midx_preferred_pack()` about incremental MIDXs
midx: teach `midx_contains_pack()` about incremental MIDXs
midx: remove unused `midx_locate_pack()`
midx: teach `fill_midx_entry()` about incremental MIDXs
midx: teach `nth_midxed_offset()` about incremental MIDXs
midx: teach `bsearch_midx()` about incremental MIDXs
midx: introduce `bsearch_one_midx()`
midx: teach `nth_bitmapped_pack()` about incremental MIDXs
midx: teach `nth_midxed_object_oid()` about incremental MIDXs
midx: teach `prepare_midx_pack()` about incremental MIDXs
midx: teach `nth_midxed_pack_int_id()` about incremental MIDXs
midx: add new fields for incremental MIDX chains
Documentation: describe incremental MIDX format
|
|
Perforce tests have been updated.
* ps/p4-tests-updates:
t98xx: mark Perforce tests as memory-leak free
ci: update Perforce version to r23.2
t98xx: fix Perforce tests with p4d r23 and newer
|
|
Now that the rest of the MIDX subsystem and relevant callers have been
updated to learn about how to read and process incremental MIDX chains,
let's finally update the implementation in `write_midx_internal()` to be
able to write incremental MIDX chains.
This new feature is available behind the `--incremental` option for the
`multi-pack-index` builtin, like so:
$ git multi-pack-index write --incremental
The implementation for doing so is relatively straightforward, and boils
down to a handful of different kinds of changes implemented in this
patch:
- The `compute_sorted_entries()` function is taught to reject objects
which appear in any existing MIDX layer.
- Functions like `write_midx_revindex()` are adjusted to write
pack_order values which are offset by the number of objects in the
base MIDX layer.
- The end of `write_midx_internal()` is adjusted to move
non-incremental MIDX files when necessary (i.e. when creating an
incremental chain with an existing non-incremental MIDX in the
repository).
There are a handful of other changes that are introduced, like new
functions to clear incremental MIDX files that are unrelated to the
current chain (using the same "keep_hash" mechanism as in the
non-incremental case).
The tests explicitly exercising the new incremental MIDX feature are
relatively limited for two reasons:
1. Most of the "interesting" behavior is already thoroughly covered in
t5319-multi-pack-index.sh, which handles the core logic of reading
objects through a MIDX.
The new tests in t5334-incremental-multi-pack-index.sh are mostly
focused on creating and destroying incremental MIDXs, as well as
stitching their results together across layers.
2. A new GIT_TEST environment variable is added called
"GIT_TEST_MULTI_PACK_INDEX_WRITE_INCREMENTAL", which modifies the
entire test suite to write incremental MIDXs after repacking when
combined with the "GIT_TEST_MULTI_PACK_INDEX" variable.
This exercises the long tail of other interesting behavior that is
defined implicitly throughout the rest of the CI suite. It is
likewise added to the linux-TEST-vars job.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two years ago, commit ff1e653c8e2 (midx: respect
'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP', 2021-08-31) introduced a new
environment variable which caused the test suite to write MIDX bitmaps
after any 'git repack' invocation.
At the time, this was done to help flush out any bugs with MIDX bitmaps
that weren't explicitly covered in the t5326-multi-pack-bitmap.sh
script.
Two years later, that flag has served us well and is no longer providing
meaningful coverage, as the script in t5326 has matured substantially
and covers many more interesting cases than it did back when ff1e653c8e2
was originally written.
Remove the 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' environment variable
as it is no longer serving a useful purpose. More importantly, removing
this variable clears the way for us to introduce a new one to help
similarly flush out bugs related to incremental MIDX chains.
Because these incremental MIDX chains are (for now) incompatible with
MIDX bitmaps, we cannot have both.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A CI job that use clang-format to check coding style issues in new
code has been added.
* kn/ci-clang-format:
ci/style-check: add `RemoveBracesLLVM` in CI job
check-whitespace: detect if no base_commit is provided
ci: run style check on GitHub and GitLab
clang-format: formalize some of the spacing rules
clang-format: avoid spacing around bitfield colon
clang-format: indent preprocessor directives after hash
|
|
Update our Perforce version from r21.2 to r23.2. Note that the updated
version is not the newest version. Instead, it is the last version where
the way that Perforce is being distributed remains the same as in r21.2.
Newer releases stopped distributing p4 and p4d executables as well as
the macOS archives directly and would thus require more work.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For 'clang-format', setting 'RemoveBracesLLVM' to 'true', adds a check
to ensure we avoid curly braces for single-statement bodies in
conditional blocks.
However, the option does come with two warnings [1]:
This option will be renamed and expanded to support other styles.
and
Setting this option to true could lead to incorrect code formatting
due to clang-format’s lack of complete semantic information. As
such, extra care should be taken to review code changes made by
this option.
The latter seems to be of concern. While we want to experiment with the
rule, adding it to the in-tree '.clang-format' could affect end-users.
Let's only add it to the CI jobs for now. With time, we can evaluate
its efficacy and decide if we want to add it to '.clang-format' or
retract it entirely. We do so, by adding the existing rules in
'.clang-format' and this rule to a temp file outside the working tree,
which is then used by 'git clang-format'. This ensures we don't murk
with files in-tree.
[1]: https://clang.llvm.org/docs/ClangFormatStyleOptions.html#removebracesllvm
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
