linux/Documentation/block, branch v5.12

block/bfq: update comments and default value in docs for fifo_expire

2021-03-02T18:25:38Z

Correct the comments since bfq_fifo_expire[0] is for async request, while bfq_fifo_expire[1] is for sync request. Also update docs, according the source code, the default fifo_expire_async is 250ms, and fifo_expire_sync is 125ms. Signed-off-by: Joseph Qi Acked-by: Paolo Valente Signed-off-by: Jens Axboe

Merge tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2021-02-22T17:05:28Z

Pull MMC updates from Ulf Hansson: "MMC core: - Add support for eMMC inline encryption - Add a helper function to parse DT properties for clock phases - Some improvements and cleanups for the mmc_test module MMC host: - android-goldfish: Remove driver - cqhci: Add support for eMMC inline encryption - dw_mmc-zx: Remove driver - meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED - mmci: Add support for probing bus voltage level translator - mtk-sd: Address race condition for request timeouts - sdhci_am654: Add Support for the variant on TI's AM64 SoC - sdhci-esdhc-imx: Prevent kernel panic at ->remove() - sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4 - sdhci-msm: Add Inline Crypto Engine support - sdhci-msm: Use actual_clock to improve timeout calculations - sdhci-of-aspeed: Add Andrew Jeffery as maintainer - sdhci-of-aspeed: Extend clock support for the AST2600 variant - sdhci-pci-gli: Increase idle period for low power state for GL9763E - sdhci-pci-o2micro: Make tuning for SDR104 HW more robust - sdhci-sirf: Remove driver - sdhci-xenon: Add support for the AP807 variant - sunxi-mmc: Add support for the A100 variant - sunxi-mmc: Ensure host is suspended during system sleep - tmio: Add detection of data timeout errors - tmio/renesas_sdhi: Extend support for retuning - renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops" * tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits) mmc: sdhci-esdhc-imx: fix kernel panic when remove module mmc: host: Retire MMC_GOLDFISH mmc: cb710: Use new tasklet API mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure mmc: mmc_test: use erase_arg for mmc_erase command mmc: wbsd: Use new tasklet API mmc: via-sdmmc: Use new tasklet API mmc: uniphier-sd: Use new tasklet API mmc: tifm_sd: Use new tasklet API mmc: s3cmci: Use new tasklet API mmc: omap: Use new tasklet API mmc: dw_mmc: Use new tasklet API mmc: au1xmmc: Use new tasklet API mmc: atmel-mci: Use new tasklet API mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ mmc: queue: Remove unused define mmc: core: Drop redundant bouncesz from struct mmc_card mmc: core: Drop redundant member in struct mmc host mmc: core: Use host instead of card argument to mmc_spi_send_csd() mmc: core: Exclude unnecessary header file ...

block: introduce zone_write_granularity limit

2021-02-10T14:44:40Z

Per ZBC and ZAC specifications, host-managed SMR hard-disks mandate that all writes into sequential write required zones be aligned to the device physical block size. However, NVMe ZNS does not have this constraint and allows write operations into sequential zones to be aligned to the device logical block size. This inconsistency does not help with software portability across device types. To solve this, introduce the zone_write_granularity queue limit to indicate the alignment constraint, in bytes, of write operations into zones of a zoned block device. This new limit is exported as a read-only sysfs queue attribute and the helper blk_queue_zone_write_granularity() introduced for drivers to set this limit. The function blk_queue_set_zoned() is modified to set this new limit to the device logical block size by default. NVMe ZNS devices as well as zoned nullb devices use this default value as is. The scsi disk driver is modified to execute the blk_queue_zone_write_granularity() helper to set the zone write granularity of host-managed SMR disks to the disk physical block size. The accessor functions queue_zone_write_granularity() and bdev_zone_write_granularity() are also introduced. Signed-off-by: Damien Le Moal Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Reviewed-by: Chaitanya Kulkarni Reviewed-by: Johannes Thumshirn Signed-off-by: Jens Axboe

block: document zone_append_max_bytes attribute

2021-02-10T14:44:40Z

The description of the zone_append_max_bytes sysfs queue attribute is missing from Documentation/block/queue-sysfs.rst. Add it. Signed-off-by: Damien Le Moal Reviewed-by: Christoph Hellwig Reviewed-by: Chaitanya Kulkarni Reviewed-by: Martin K. Petersen Reviewed-by: Johannes Thumshirn Signed-off-by: Jens Axboe

block/keyslot-manager: introduce devm_blk_ksm_init()

2021-02-01T10:56:18Z

Add a resource-managed variant of blk_ksm_init() so that drivers don't have to worry about calling blk_ksm_destroy(). Note that the implementation uses a custom devres action to call blk_ksm_destroy() rather than switching the two allocations to be directly devres-managed, e.g. with devm_kmalloc(). This is because we need to keep zeroing the memory containing the keyslots when it is freed, and also because we want to continue using kvmalloc() (and there is no devm_kvmalloc()). Signed-off-by: Eric Biggers Reviewed-by: Satya Tangirala Acked-by: Jens Axboe Link: https://lore.kernel.org/r/20210121082155.111333-2-ebiggers@kernel.org Signed-off-by: Ulf Hansson

bvec/iter: disallow zero-length segment bvecs

2021-01-25T15:58:24Z

zero-length bvec segments are allowed in general, but not handled by bio and down the block layer so filtered out. This inconsistency may be confusing and prevent from optimisations. As zero-length segments are useless and places that were generating them are patched, declare them not allowed. Reviewed-by: Christoph Hellwig Signed-off-by: Pavel Begunkov Reviewed-by: Ming Lei Signed-off-by: Jens Axboe

Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block

2020-10-24T19:46:42Z

Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ...

docs: block: blk-mq.rst: get rid of :c:type

2020-10-15T05:49:43Z

The :c:type macros are not used properly there, as reported by Sphinx 3: ./Documentation/block/blk-mq.rst:112: WARNING: Unparseable C cross-reference: 'hctx->dispatch' Invalid C declaration: Expected end of definition. [error at 4] hctx->dispatch ----^ Also, they won't be generating any cross references. So, replace them by a literal markup. Reviewed-by: André Almeida Signed-off-by: Mauro Carvalho Chehab

docs: get rid of :c:type explicit declarations for structs

2020-10-15T05:49:40Z

The :c:type:`foo` only works properly with structs before Sphinx 3.x. On Sphinx 3.x, structs should now be declared using the .. c:struct, and referenced via :c:struct tag. As we now have the automarkup.py macro, that automatically convert: struct foo into cross-references, let's get rid of that, solving several warnings when building docs with Sphinx 3.x. Reviewed-by: André Almeida # blk-mq.rst Reviewed-by: Takashi Iwai # sound Reviewed-by: Mike Rapoport Reviewed-by: Greg Kroah-Hartman Signed-off-by: Mauro Carvalho Chehab

block: add zone specific block statuses

2020-10-13T21:05:05Z

A zoned device with limited resources to open or activate zones may return an error when the host exceeds those limits. The same command may be successful if retried later, but the host needs to wait for specific zone states before it should expect a retry to succeed. Have the block layer provide an appropriate status for these conditions so applications can distinuguish this error for special handling. Cc: linux-api@vger.kernel.org Cc: Niklas Cassel Reviewed-by: Christoph Hellwig Reviewed-by: Damien Le Moal Reviewed-by: Johannes Thumshirn Reviewed-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Jens Axboe