linux/Documentation/devicetree/bindings/clock, branch v4.0

Merge tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux

2015-02-21T20:30:30Z

Pull clock framework updates from Mike Turquette: "The clock framework changes contain the usual driver additions, enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based devices. Additionally the framework core underwent a bit of surgery with two major changes: - The boundary between the clock core and clock providers (e.g clock drivers) is now more well defined with dedicated provider helper functions. struct clk no longer maps 1:1 with the hardware clock but is a true per-user cookie which helps us tracker users of hardware clocks and debug bad behavior. - The addition of rate constraints for clocks. Rate ranges are now supported which are analogous to the voltage ranges in the regulator framework. Unfortunately these changes to the core created some breakeage. We think we fixed it all up but for this reason there are lots of last minute commits trying to undo the damage" * tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits) clk: Only recalculate the rate if needed Revert "clk: mxs: Fix invalid 32-bit access to frac registers" clk: qoriq: Add support for the platform PLL powerpc/corenet: Enable CLK_QORIQ clk: Replace explicit clk assignment with __clk_hw_set_clk clk: Add __clk_hw_set_clk helper function clk: Don't dereference parent clock if is NULL MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr clkdev: Always allocate a struct clk and call __clk_get() w/ CCF clk: shmobile: div6: Avoid division by zero in .round_rate() clk: mxs: Fix invalid 32-bit access to frac registers clk: omap: compile legacy omap3 clocks conditionally clkdev: Export clk_register_clkdev clk: Add rate constraints to clocks clk: remove clk-private.h pci: xgene: do not use clk-private.h arm: omap2+ remove dead clock code clk: Make clk API return per-user struct clk instances clk: tegra: Define PLLD_DSI and remove dsia(b)_mux clk: tegra: Add support for the Tegra132 CAR IP block ...

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-02-17T17:38:59Z

Pull ARM SoC driver updates from Olof Johansson: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. This time around, much of this is for at91, with the bulk of it being syscon and udc drivers. Also, there's: - coupled cpuidle support for Samsung Exynos4210 - Renesas 73A0 common-clk work - of/platform changes to tear down DMA mappings on device destruction - a few updates to the TI Keystone knav code" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) cpuidle: exynos: add coupled cpuidle support for exynos4210 ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM soc: ti: knav_qmss_queue: export API calls for use by user driver of/platform: teardown DMA mappings on device destruction usb: gadget: at91_udc: Allocate udc instance usb: gadget: at91_udc: Update DT binding documentation usb: gadget: at91_udc: Rework for multi-platform kernel support usb: gadget: at91_udc: Simplify probe and remove functions usb: gadget: at91_udc: Remove non-DT handling code usb: gadget: at91_udc: Document DT clocks and clock-names property usb: gadget: at91_udc: Drop uclk clock usb: gadget: at91_udc: Fix clock names mfd: syscon: Add Atmel SMC binding doc mfd: syscon: Add atmel-smc registers definition mfd: syscon: Add Atmel Matrix bus DT binding documentation mfd: syscon: Add atmel-matrix registers definition clk: shmobile: fix sparse NULL pointer warning ...

Merge tag 'tegra-clk-3.20' of git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-next

2015-02-02T23:01:10Z

Tegra clock fixes for 3.20

clk: tegra: Update binding doc for Tegra132

2015-02-02T13:47:45Z

Tegra132 has almost the same clock structure than Tegra124. This patch documents the missing clock IDs. Signed-off-by: Peter De Schrijver [paul@pwsan.com: updated binding documentation to reflect the recent split of Tegra124 clock IDs into a Tegra124/132-common file and a Tegra124-specific file] Signed-off-by: Paul Walmsley Signed-off-by: Paul Walmsley Cc: Stephen Warren Cc: Thierry Reding Cc: Alexandre Courbot Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala

Merge tag 'sunxi-clocks-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

2015-01-28T00:33:45Z

Allwinner clock changes for 3.20 The set of clock changes for the 3.20 merge window, with mostly: - Some PLL fixes for the A80 and A31 - The MMC custom phase functions are removed, and moved over to the generic phase API. - Add the A80 MMC clocks Some DT changes slipped here as well, to preserve bisectability.

devicetree: bindings: Document qcom,lcc

2015-01-27T19:49:50Z

Document the LPASS (low power audio subsystem) clock controller found on Qualcomm devices. Cc: Signed-off-by: Rajendra Nayak Signed-off-by: Kumar Gala Signed-off-by: Stephen Boyd Signed-off-by: Michael Turquette

Merge branch 'clk-shmobile-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

2015-01-27T19:34:41Z

clk: ppc-corenet: rename driver to clk-qoriq

2015-01-20T18:09:12Z

Freescale introduced new ARM-based socs which using the compatible clock IP block with PowerPC-based socs'. So this driver can be used on both platforms. Updated relevant descriptions and renamed this driver to better represent its meaning and keep the function of driver untouched. Signed-off-by: Tang Yuantian Signed-off-by: Michael Turquette

Merge tag 'for-v3.20-exynos7-clk' of git://linuxtv.org/snawrocki/samsung into clk-next

2015-01-20T18:09:09Z

- Clock definitions for Exynos7 SoC peripheral devices: video scaler, USB, DMA, SPI and the audio subsystem.

clk: ti: Add support for FAPLL on dm816x

2015-01-20T18:09:07Z

On dm816x the clocks are sourced from a FAPLL (Flying Adder PLL) that does not seem to be used on the other omap variants. There are four instances of the FAPLL on dm816x that each have three to seven child synthesizers. I've set up the FAPLL as a single fapll.c driver. Later on we could potentially have the PLL code generic. To do that, we would have to consider the following: 1. Setting the PLL to bypass mode also sets the child synthesizers into bypass mode. As the bypass rate can also be generated by the PLL in regular mode, there's no way for the child synthesizers to detect the bypass mode based on the parent clock rate. 2. The PLL registers control the power for each of the child syntheriser. Note that the clocks are currently still missing the set_rate implementation so things are still running based on the bootloader values. That's OK for now as most of the outputs have dividers and those can be set using the existing TI component clock code. I have verified that the extclk rates are correct for a few clocks, so adding the set_rate support should be fairly trivial later on. This code is partially based on the TI81XX-LINUX-PSP-04.04.00.02 patches published at: http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html Cc: Brian Hutchinson Cc: Paul Walmsley Cc: Tero Kristo Signed-off-by: Tony Lindgren Signed-off-by: Michael Turquette