linux/Documentation/devicetree/bindings/clock, branch v4.4

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-10T23:06:26Z

Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...

Merge tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2015-11-06T07:38:43Z

Pull powerpc updates from Michael Ellerman: - Kconfig: remove BE-only platforms from LE kernel build from Boqun Feng - Refresh ps3_defconfig from Geoff Levand - Emit GNU & SysV hashes for the vdso from Michael Ellerman - Define an enum for the bolted SLB indexes from Anshuman Khandual - Use a local to avoid multiple calls to get_slb_shadow() from Michael Ellerman - Add gettimeofday() benchmark from Michael Neuling - Avoid link stack corruption in __get_datapage() from Michael Neuling - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar K.V - Add ppc64le_defconfig from Michael Ellerman - pseries: extract of_helpers module from Andy Shevchenko - Correct string length in pseries_of_derive_parent() from Nathan Fontenot - Free the MSI bitmap if it was slab allocated from Denis Kirjanov - Shorten irq_chip name for the SIU from Christophe Leroy - Wait 1s for secondaries to enter OPAL during kexec from Samuel Mendoza-Jonas - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from Colin Ian King - Disable hugepd for 64K page size, from Aneesh Kumar K.V - Differentiate between hugetlb and THP during page walk from Aneesh Kumar K.V - Make PCI non-optional for pseries from Michael Ellerman - Individual System V IPC system calls from Sam bobroff - Add selftest of unmuxed IPC calls from Michael Ellerman - discard .exit.data at runtime from Stephen Rothwell - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul Gortmaker - Use of_get_next_parent to simplify code from Christophe Jaillet - Paginate some xmon output from Sam bobroff - Add some more elements to the xmon PACA dump from Michael Ellerman - Allow the tm-syscall selftest to build with old headers from Michael Ellerman - Run EBB selftests only on POWER8 from Denis Kirjanov - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael Ellerman - Avoid reference to potentially freed memory in prom.c from Christophe Jaillet - Quieten boot wrapper output with run_cmd from Geoff Levand - EEH fixes and cleanups from Gavin Shan - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael Ellerman - Fix section mismatch warning in msi_bitmap_alloc() from Denis Kirjanov - Fix ps3-lpm white space from Rudhresh Kumar J - Fix ps3-vuart null dereference from Colin King - nvram: Add missing kfree in error path from Christophe Jaillet - nvram: Fix function name in some errors messages, from Christophe Jaillet - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro Koskinen - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov - cxl: Free virtual PHB when removing from Andrew Donnellan - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from Michael Ellerman - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O= from Michael Ellerman - Freescale updates from Scott: Highlights include 64-bit book3e kexec/kdump support, a rework of the qoriq clock driver, device tree changes including qoriq fman nodes, support for a new 85xx board, and some fixes. - MPC5xxx updates from Anatolij: Highlights include a driver for MPC512x LocalPlus Bus FIFO with its device tree binding documentation, mpc512x device tree updates and some minor fixes. * tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits) powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc() powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id() powerpc/pseries: Correct string length in pseries_of_derive_parent() powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s) powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes powerpc: handle error case in cpm_muram_alloc() powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake powerpc/book3e-64: Enable kexec powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32 powerpc/book3e-64/kexec: Enable SMP release powerpc/book3e-64/kexec: create an identity TLB mapping powerpc/book3e-64: Don't limit paca to 256 MiB powerpc/book3e/kdump: Enable crash_kexec_wait_realmode powerpc/book3e: support CONFIG_RELOCATABLE powerpc/booke64: Fix args to copy_and_flush powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts powerpc/e6500: kexec: Handle hardware threads ...

Merge tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux into next/dt

2015-10-26T05:27:33Z

This pull request contains the DT changes for BCM2835 in 4.4. It pulls in clk/clk-bcm2835 (which Stephen Boyd has said would be stable) because the DT changes to enable the clock driver need the driver itself to be present. These changes include the following: - Eric Anholt, moves the bcm2835 clock driver under bcm/ where it belongs with other Broadcom clock providers drivers, defines the binding for new clock driver, adds support for programming the BCM2835 audio domain, adds the DDC I2C controller to Device Tree, and finally migrates the Device Tree to use the new clock driver binding - Lubomir Rintel adds support for the Raspberry Pi Model A+ and B revision 2, and remove the I2S controller which is non-existent on Raspberry Pi Model B - Stefan Wahren adds an uart0 label for referencing the UART adapter * tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux: ARM: bcm2835: Add the DDC I2C controller to the device tree. ARM: bcm2835: Switch to using the new clock driver support. ARM: bcm2835: dt: Add Raspberry Pi Model A+ ARM: bcm2835: dt: Add Raspberry Pi Model B rev2 ARM: bcm2835: dt: Raspberry Pi Model B had no I2S ARM: bcm2835: add label for uart0 clk: bcm2835: Add support for programming the audio domain clocks clk: bcm2835: Add binding docs for the new platform clock driver. clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers. Signed-off-by: Olof Johansson

Merge branch 'clk-iproc' into clk-next

2015-10-22T00:28:19Z

* clk-iproc: clk: iproc: define Broadcom NS2 iProc clock binding clk: iproc: define Broadcom NSP iProc clock binding clk: ns2: add clock support for Broadcom Northstar 2 SoC clk: iproc: Separate status and control variables clk: iproc: Split off dig_filter clk: iproc: Add PLL base write function clk: nsp: add clock support for Broadcom Northstar Plus SoC clk: iproc: Add PWRCTRL support clk: cygnus: Convert all macros to all caps ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled

clk: iproc: define Broadcom NS2 iProc clock binding

2015-10-22T00:23:03Z

Document the device tree bindings for Broadcom Northstar 2 architecture based clock controller Signed-off-by: Jon Mason Signed-off-by: Stephen Boyd

clk: iproc: define Broadcom NSP iProc clock binding

2015-10-22T00:23:01Z

Document the device tree bindings for Broadcom Northstar Plus architecture based clock controller Signed-off-by: Jon Mason Signed-off-by: Stephen Boyd

clk: qoriq: Move chip-specific knowledge into driver

2015-10-21T23:05:52Z

The device tree should describe the chips (or chip-like subblocks) in the system, but it generally does not describe individual registers -- it should identify, rather than describe, a programming interface. This has not been the case with the QorIQ clockgen nodes. The knowledge of what each bit setting of CLKCnCSR means is encoded in three places (binding, pll node, and mux node), and the last also needs to know which options are valid on a particular chip. All three of these locations are considered stable ABI, making it difficult to fix mistakes (of which I have found several), much less refactor the abstraction to be able to address problems, limitations, or new chips. Under the current binding, a pll clock specifier of 2 means that the PLL is divided by 4 -- and the driver implements this, unless there happen to be four clock-output-names rather than 3, in which case it interprets it as PLL divided by 3. This does not appear in the binding documentation at all. That hack is now considered stable ABI. The current device tree nodes contain errors, such as saying that T1040 can set a core clock to PLL/4 when only PLL and PLL/2 are options. The current binding also ignores some restrictions on clock selection, such as p5020's requirement that if a core uses the "wrong" PLL, that PLL must be clocked lower than the "correct" PLL and be at most 80% of the rated CPU frequency. Possibly because of the lack of the ability to express such nuance in the binding, some valid options are omitted from the device trees, such as the ability on p4080 to run cores 0-3 from PLL3 and cores 4-7 from PLL1 (again, only if they are at most 80% of rated CPU frequency). This omission, combined with excessive caution in the cpufreq driver (addressed in a subsequent patch), means that currently on a 1500 MHz p4080 with typical PLL configuration, cpufreq can lower the frequency to 1200 MHz on half the CPUs and do nothing on the others. With this patchset, all CPUs can be lowered to 1200 MHz on a rev2 p4080, and on a rev3 p4080 half can be lowered to 750 MHz and the other half to 600 MHz. The current binding only deals with CPU clocks. To describe FMan in the device tree, we need to describe its clock. Some chips have additional muxes that work like the CPU muxes, but are not described in the device tree. Others require inspecting the Reset Control Word to determine which PLL is used. Rather than continue to extend this mess, replace it. Have the driver bind to the chip-specific clockgen compatible, and keep the detailed description of quirky chip variations in the driver, where it can be easily fixed, refactored, and extended. Older device trees will continue to work (including a workaround for old ls1021a device trees that are missing compatible and reg in the clockgen node, which even the old binding required). The pll/mux details in old device trees will be ignored, but "clocks" properties pointing at the old nodes will still work, and be directed at the corresponding new clock. Signed-off-by: Scott Wood Acked-by: Stephen Boyd

Merge branch 'clk-shmobile-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

2015-10-21T09:26:51Z

clk: shmobile: Add new Renesas CPG/MSSR DT bindings

2015-10-20T18:35:34Z

On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) and MSSR (Module Standby and Software Reset) blocks are intimately connected, and share the same register block. Hence it makes sense to describe these two blocks using a single device node in DT, instead of using a hierarchical structure with multiple nodes, using a mix of generic and SoC-specific bindings. These new DT bindings are intended to replace the existing DT bindings for CPG core clocks ("renesas,*-cpg-clocks", "renesas,cpg-div6-clock") and module clocks ("renesas,*-mstp-clocks"), at least for new SoCs. This will make it easier to add module reset support later, which is currently not implemented, and difficult to achieve using the existing bindings due to the intertwined register layout. Signed-off-by: Geert Uytterhoeven Acked-by: Michael Turquette Reviewed-by: Magnus Damm

arm: dts: qcom: Add #power-domain-cells property

2015-10-13T21:40:01Z

clock controller nodes which also support power domains (gdscs') need to have a #power-domain-cells property. Add these for gcc and mmcc nodes of msm8974, gcc of apq8084 and msm8916. Also update gcc and mmcc bindings for it. Signed-off-by: Rajendra Nayak Acked-by: Stephen Boyd Signed-off-by: Andy Gross