linux/Documentation/devicetree/bindings/firmware, branch master

Merge tag 'qcom-drivers-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

2026-04-02T21:19:52Z

Qualcomm driver updates for v7.1 Add ECS LIVA QC710, Glymur CRD, Mahua CRD, Purwa IoT EVK, and Asus Vivobook to the QSEECOM allow-list, to enable UEFI variable access through uefisecapp. Register the Gunyah watchdog device if the SCM driver finds itself running under Gunyah. Clean up some locking using guards. Handle possible cases where AOSS cooling state is given a non-boolean state. Replace LLCC per-slice activation bitmap with reference counting. Also add SDM670 support. Improve probe deferral handling in the OCMEM driver. Add Milos, QCS615, Eliza, Glymur, and Mahua support to the pd-mapper. Add support for SoCCP-based pmic-glink, as found in Glymur and Kaanapali. Add common QMI service ids to the main qmi headerfile, to avoid spreading these constants in various drivers. Add support for version 2 of SMP2P and implement the irqchip state reading support. Add CQ7790, SA8650P, SM7450, SM7450P, and IPQ5210 SoC and the PM7550BA PMIC identifiers to the socinfo driver. Add Eliza and Mahua support to the UBWC driver, introduce helpers for drivers to read out min_acc length and other programmable values, and disable bank swizzling for Glymur. Simplify the logic related to allocation of NV download request in the WCNSS control driver. * tag 'qcom-drivers-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits) soc: qcom: ubwc: add helpers to get programmable values soc: qcom: ubwc: add helper to get min_acc length firmware: qcom: scm: Register gunyah watchdog device soc: qcom: socinfo: Add SoC ID for SA8650P dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P firmware: qcom: scm: Allow QSEECOM on Mahua CRD soc: qcom: wcnss: simplify allocation of req soc: qcom: pd-mapper: Add support for Eliza soc: qcom: aoss: compare against normalized cooling state soc: qcom: llcc: fix v1 SB syndrome register offset dt-bindings: firmware: qcom,scm: Document ipq9650 SCM soc: qcom: ubwc: Add support for Mahua soc: qcom: pd-mapper: Add support for Glymur and Mahua soc: qcom: ubwc: Add configuration Eliza SoC soc: qcom: ubwc: Remove redundant x1e80100_data dt-bindings: firmware: qcom,scm: document Eliza SCM Firmware Interface soc: qcom: ocmem: return -EPROBE_DEFER is ocmem is not available soc: qcom: ocmem: register reasons for probe deferrals soc: qcom: ocmem: make the core clock optional soc: qcom: ubwc: disable bank swizzling for Glymur platform ... Signed-off-by: Arnd Bergmann

Merge tag 'scmi-updates-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers

2026-04-01T21:48:30Z

Arm SCMI updates for v7.1 This batch mainly improves SCMI robustness on systems where the SCP does not generate completion interrupts, and includes two small follow-up cleanups in the SCMI core. The main functional change adds support for the new DT property 'arm,no-completion-irq'. When present for mailbox/shared-memory based SCMI implementations, the driver forces SCMI operations into polling mode so affected platforms can continue to operate even with broken firmware interrupt behavior. In addition, it - replaces open-coded size rounding in the base protocol path with round_up() for clarity, with no functional change - updates the SCMI quirk snippet macro implementation so quirk handlers can use break and continue directly when invoked inside loop contexts * tag 'scmi-updates-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Support loop control in quirk code snippets firmware: arm_scmi: Use round_up() for base protocol list size calculation firmware: arm_scmi: Implement arm,no-completion-irq property dt-bindings: firmware: arm,scmi: Document arm,no-completion-irq property Signed-off-by: Arnd Bergmann

dt-bindings: firmware: qcom,scm: Document ipq9650 SCM

2026-03-26T15:52:21Z

Document the scm compatible for ipq9650 SoC. Signed-off-by: Kathiravan Thirumoorthy Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20260325-ipq9650_scm-v1-1-ad6a3fe53f38@oss.qualcomm.com Signed-off-by: Bjorn Andersson

dt-bindings: firmware: qcom,scm: document Eliza SCM Firmware Interface

2026-03-24T03:48:10Z

Document the SCM Firmware Interface on the Eliza SoC. Signed-off-by: Abel Vesa Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20260311-eliza-bindings-scm-v2-1-b2d2e69068e3@oss.qualcomm.com Signed-off-by: Bjorn Andersson

dt-bindings: firmware: qcom,scm: Document ipq5210 SCM

2026-03-19T01:54:07Z

Document the scm compatible for ipq5210 SoC. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Kathiravan Thirumoorthy Link: https://lore.kernel.org/r/20260318-ipq5210_boot_to_shell-v2-4-a87e27c37070@oss.qualcomm.com Signed-off-by: Bjorn Andersson

dt-bindings: firmware: arm,scmi: Document arm,no-completion-irq property

2026-03-08T12:59:33Z

Document new property arm,no-completion-irq . This optional property is intended for hardware that does not generate completion interrupts and can be used to unconditionally enable forced polling mode of operation. With this property set, such implementations which do not generate interrupts can be interacted with, until they are fixed to generate interrupts properly. Note that, because the original base protocol exchange also requires some sort of completion mechanism, it is not possible to query SCMI itself for this property and it must be described in DT. While this does look a bit like policy, the SCMI provider is part of the hardware, hence DT. Reviewed-by: Rob Herring (Arm) Signed-off-by: Marek Vasut Reviewed-by: Cristian Marussi Message-Id: <20260117010241.186685-1-marek.vasut+renesas@mailbox.org> Signed-off-by: Sudeep Holla

dt-bindings: firmware: google,gs101-acpm-ipc: add S2MPG11 secondary PMIC

2026-02-26T08:41:26Z

In a typical system using the Samsung S2MPG10 PMIC, an S2MPG11 is used as a sub-PMIC. The interface for both is the ACPM firmware protocol, so update the binding to allow the relevant node and update the example here to describe the connection for both PMICs. Since we have two PMICs here, but can not use the 'reg' property (as the addressing is based on software, i.e. the ACPM firmware), the node names reflect that with their respective suffix. The existing 'pmic' therefore becomes deprecated in favour of 'pmic-1'. While at it, update the example. Reviewed-by: Krzysztof Kozlowski Signed-off-by: André Draszik Link: https://patch.msgid.link/20260210-s2mpg1x-regulators-v8-1-c429d709c0e0@linaro.org Signed-off-by: Krzysztof Kozlowski

Merge tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2026-02-12T02:27:08Z

Pull devicetree updates from Rob Herring: "DT core: - Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8 - Add a for_each_compatible_node_scoped() loop and convert users in cpufreq, dmaengine, clk, cdx, powerpc and Arm - Simplify of/platform.c with scoped loop helpers - Add fw_devlink tracking for "mmc-pwrseq" - Optimize fw_devlink callback code size for pinctrl-N properties - Replace strcmp_suffix() with strends() DT bindings: - Support building single binding targets - Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst - Add bindings for Freescale AVIC, Realtek RTD1xxx system controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply, Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610 Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller, socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware - Lots of trivial binding fixes to address warnings in DTS files. These are mostly for arm64 platforms which is getting closer to be warning free. Some public shaming has helped. - Fix I2C bus node names in examples - Drop obsolete brcm,vulcan-soc binding - Drop unreferenced binding headers" * tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits) dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated cpufreq: s5pv210: Simplify with scoped for each OF child loop dmaengine: fsl_raid: Simplify with scoped for each OF child loop clk: imx: imx31: Simplify with scoped for each OF child loop clk: imx: imx27: Simplify with scoped for each OF child loop cdx: Use mutex guard to simplify error handling cdx: Simplify with scoped for each OF child loop powerpc/wii: Simplify with scoped for each OF child loop powerpc/fsp2: Simplify with scoped for each OF child loop ARM: exynos: Simplify with scoped for each OF child loop ARM: at91: Simplify with scoped for each OF child loop of: Add for_each_compatible_node_scoped() helper dt-bindings: Fix emails with spaces or missing brackets scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8 dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles of: reserved_mem: Fix placement of __free() annotation ...

Merge tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2026-02-11T17:40:12Z

Pull regulator updates from Mark Brown: "There's a bunch of new drivers here, plus a lot of hardening for the supply resolution code which allow us to support systems where we have two PMICs each of which has regulators supplied by the other. This did work a long time ago but got broken as part of improved integration with the device model, it's fairly rare so nobody noticed. - Improvements for supply handling from André Draszik to allow systems with two PMICs with supply/consumer relationships in both directions to instantiate. - New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11, Texas Instuments TPS65185. This have also pulls in some MFD updates which are build dependencies for the Samsung S2MPG11 support" * tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits) regulator: s2mps11: more descriptive gpio consumer name regulator: s2mps11: add S2MPG11 regulator regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse regulator: s2mps11: add S2MPG10 regulator regulator: s2mps11: refactor handling of external rail control regulator: s2mps11: update node parsing (allow -supply properties) regulator: s2mps11: place constants on right side of comparison tests regulator: s2mps11: use dev_err_probe() where appropriate regulator: s2mps11: drop two needless variable initialisations regulator: add REGULATOR_LINEAR_VRANGE macro regulator: dt-bindings: add s2mpg11-pmic regulators regulator: dt-bindings: add s2mpg10-pmic regulators dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase mfd: sec: Add support for S2MPG11 PMIC via ACPM mfd: sec: s2mpg10: Reorder regulators for better probe performance dt-bindings: mfd: Add samsung,s2mpg11-pmic dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file mfd: sec: Drop now unused struct sec_pmic_dev::irq_data ...

Merge tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2026-02-10T16:36:42Z

Pull crypto update from Herbert Xu: "API: - Fix race condition in hwrng core by using RCU Algorithms: - Allow authenc(sha224,rfc3686) in fips mode - Add test vectors for authenc(hmac(sha384),cbc(aes)) - Add test vectors for authenc(hmac(sha224),cbc(aes)) - Add test vectors for authenc(hmac(md5),cbc(des3_ede)) - Add lz4 support in hisi_zip - Only allow clear key use during self-test in s390/{phmac,paes} Drivers: - Set rng quality to 900 in airoha - Add gcm(aes) support for AMD/Xilinx Versal device - Allow tfms to share device in hisilicon/trng" * tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits) crypto: img-hash - Use unregister_ahashes in img_{un}register_algs crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede)) crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes)) crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes)) hwrng: core - use RCU and work_struct to fix race condition crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req() crypto: xilinx - Fix inconsistant indentation crypto: rng - Use unregister_rngs in register_rngs crypto: atmel - Use unregister_{aeads,ahashes,skciphers} hwrng: optee - simplify OP-TEE context match crypto: ccp - Add sysfs attribute for boot integrity dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE crypto: caam - fix netdev memory leak in dpaa2_caam_probe crypto: hisilicon/qm - increase wait time for mailbox crypto: hisilicon/qm - obtain the mailbox configuration at one time crypto: hisilicon/qm - remove unnecessary code in qm_mb_write() crypto: hisilicon/qm - move the barrier before writing to the mailbox register ...