linux/Documentation/devicetree/bindings/input/touchscreen, branch master

Merge tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2026-02-15T16:24:19Z

Pull input updates from Dmitry Torokhov: - support for FocalTech FT8112 added to i2c-hid driver - support for FocalTech FT3518 added to edt-ft5x06 driver - support for power buttons in TWL603x chips added to twl4030-pwrbutton driver - an update to gpio-decoder driver to make it usable on non-OF platforms and to clean up the code - an update to synaptics_i2c driver switching it to use managed resources and a fix to restarting polling after resume - an update to gpio-keys driver to fall back to getting IRQ from resources if not specified using other means - an update to ili210x driver to support polling mode - a number of input drivers switched to scnprintf() to suppress truncation warnings - a number of updates and conversions of device tree bindings to yaml format - fixes to spelling in comments and messages in several drivers - other assorted fixups * tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038 Input: apbps2 - fix comment style and typos Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys Input: novatek-nvt-ts - drop wake_type check dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells' Input: ili210x - add support for polling mode dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek Input: appletouch - fix potential race between resume and open HID: i2c-hid: Add FocalTech FT8112 dt-bindings: input: i2c-hid: Introduce FocalTech FT8112 Input: synaptics_i2c - switch to using managed resources Input: synaptics_i2c - guard polling restart in resume Input: gpio_decoder - don't use "proxy" headers Input: gpio_decoder - make use of the macros from bits.h Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep() Input: gpio_decoder - unify messages with help of dev_err_probe() Input: gpio_decoder - make use of device properties Input: serio - complete sizeof(*pointer) conversions Input: wdt87xx_i2c - switch to use dev_err_probe() ...

dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038

2026-02-04T11:25:17Z

Imagis IST3038 provides touch keys. Allow linux,keycodes for ist3038. Signed-off-by: Raymond Hackley Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20251224100941.3356201-1-raymondhackley@protonmail.com Signed-off-by: Dmitry Torokhov

Merge tag 'v6.20-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

2026-01-28T18:05:34Z

New boards: Anberic RG-DS game console, Radxa CM3J module + baseboard for the Rpi CM4 IO board, QNAP TS133 from the RK3568 NAS series. 2 display outputs for the Lion board (old RK3368), TPS65185 pmic for the PineNote and fixes for the PCIe ranges on both RK356x and RK3588. These came quite late, so I wanted to give them the time till 6.20-rc1 and have them migrate to stable-kernels afterwards. The rest is small stuff on a number of boards wrt gpios and compatibles. * tag 'v6.20-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits) arm64: dts: rockchip: Fix rk3588 PCIe range mappings arm64: dts: rockchip: Fix rk356x PCIe range mappings arm64: dts: rockchip: Add Anbernic RG-DS dt-bindings: input: touchscreen: goodix: Add "panel" property dt-bindings: arm: rockchip: Add Anbernic RG-DS arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576 arm64: dts: rockchip: Add TPS65185 for PineNote arm64: dts: rockchip: Do not enable hdmi_sound node on Pinebook Pro arm64: dts: rockchip: Fix imx258 variant on pinephone pro arm64: dts: rockchip: Add the Video-Demo overlay for Lion Haikou arm64: dts: rockchip: Enable pwm1 on rk3368-lion-haikou arm64: dts: rockchip: Enable HDMI output on RK3368-Lion-Haikou arm64: dts: rockchip: Add HDMI node to RK3368 arm64: dts: rockchip: Use phandle for i2c_lvds_blc on rk3368-lion haikou arm64: dts: rockchip: Fix SD card support for RK3576 Nanopi R76s arm64: dts: rockchip: Fix SD card support for RK3576 EVB1 arm64: dts: rockchip: Add Radxa CM3J on RPi CM4 IO Board arm64: dts: rockchip: Add Radxa CM3J dt-bindings: arm: rockchip: Add Radxa CM3J on RPi CM4 IO Board arm64: dts: rockchip: Make eeprom read-only for Radxa ROCK 3C/5A/5C ... Signed-off-by: Arnd Bergmann

dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'

2026-01-25T05:28:43Z

The tsc2007 can be used not only as resistive touchscreen controller but also as a ADC IIO sensor. The second use case requires '#io-channel-cells' property, hence add it. Signed-off-by: Svyatoslav Ryhel Acked-by: Rob Herring (Arm) Link: https://patch.msgid.link/20260122193549.29858-2-clamor95@gmail.com Signed-off-by: Dmitry Torokhov

dt-bindings: input: touchscreen: goodix: Add "panel" property

2026-01-22T18:26:42Z

Add a "panel" property to define a relationship between a touchscreen and an associated panel when more than one of each exist in a device. Signed-off-by: Chris Morgan Acked-by: Dmitry Torokhov Acked-by: Rob Herring (Arm) [picked with the rest with Dmitry's Ack] Link: https://patch.msgid.link/20260113195721.151205-6-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner

dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek

2026-01-22T00:17:51Z

The old Ilitek touch controllers V3 and V6 can operate without interrupt line, in polling mode. Drop the 'interrupts' property requirement for those four controllers. To avoid overloading the trivial-touch, fork the old Ilitek V3/V6 touch controller binding into separate document. Reviewed-by: Frank Li Reviewed-by: Krzysztof Kozlowski Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260121230736.114623-1-marek.vasut+renesas@mailbox.org Signed-off-by: Dmitry Torokhov

dt-bindings: input: touchscreen: edt-ft5x06: Add FocalTech FT3518

2026-01-20T18:33:42Z

Document FocalTech FT3518 support by adding the compatible. Co-developed-by: Kamil Gołda Signed-off-by: Kamil Gołda Acked-by: Krzysztof Kozlowski Signed-off-by: Yedaya Katsman Link: https://patch.msgid.link/20260118-touchscreen-patches-v3-1-1c6a729c5eb4@gmail.com Signed-off-by: Dmitry Torokhov

dt-bindings: Updates Linus Walleij's mail address

2025-12-16T16:17:59Z

My name is stamped into maintainership for a big slew of DT bindings. Now that it is changing, switch it over to my kernel.org mail address, which will hopefully be stable for the rest of my life. Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org Signed-off-by: Rob Herring (Arm)

dt-bindings: input: touchscreen: sitronix,st1232: Add Sitronix ST1624

2025-12-16T06:20:36Z

Add the Sitronix ST1624 which is compatible with ST1633. Signed-off-by: Rob Herring (Arm) Link: https://patch.msgid.link/20251215212524.3318311-1-robh@kernel.org Signed-off-by: Dmitry Torokhov

Merge tag 'input-for-v6.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2025-12-10T07:44:18Z

Pull input updates from Dmitry Torokhov: - DT bindings for Melfas MIP4 touchscreen controller and TWL4030 keypad have been converted to the DT schema - simple touch controller bindings have been consolidated to trivial-touch.yaml DT schema - memory allocation failure noise was removed from qnap-mcu-input and zforce_ts dirvers - ti_am335x_tsc driver was hardened to handle invalid (too large) number of coordinates specified in device tree - a cleanup in Cypress cyttsp5 driver to use %pe to print error code * tag 'input-for-v6.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ti_am335x_tsc - clamp coordinate_readouts to DT maximum (6) dt-bindings: touchscreen: consolidate simple touch controller to trivial-touch.yaml dt-bindings: touchscreen: trivial-touch: add reset-gpios and wakeup-source dt-bindings: input: ti,twl4030-keypad: convert to DT schema Input: zforce_ts - omit error message when memory allocation fails Input: qnap-mcu-input - omit error message when memory allocation fails dt-bindings: input: Convert MELFAS MIP4 Touchscreen to DT schema dt-bindings: touchscreen: move ar1021.txt to trivial-touch.yaml dt-bindings: touchscreen: rename maxim,max11801.yaml to trivial-touch.yaml Input: cyttsp5 - use %pe format specifier