linux/Documentation/devicetree/bindings/net, branch master

dt-bindings: net: qcom,ipa: add Milos compatible

2026-04-12T22:26:13Z

Add support for the Milos SoC, which uses IPA v5.2. Acked-by: Krzysztof Kozlowski Signed-off-by: Luca Weiss Link: https://patch.msgid.link/20260410-ipa-v5-2-v2-1-778422a05060@fairphone.com Signed-off-by: Jakub Kicinski

dt-bindings: net: document Microchip PIC64-HPSC/HX MDIO controller

2026-04-12T21:19:19Z

This MDIO hardware is based on a Microsemi design supported in Linux by mdio-mscc-miim.c. However, The register interface is completely different with pic64hpsc, hence the need for separate documentation. The hardware supports C22 and C45. The documentation recommends an input clock of 156.25MHz and a prescaler of 39, which yields an MDIO clock of 1.95MHz. The hardware supports an interrupt pin to signal transaction completion which is not strictly needed as the software can also poll a "TRIGGER" bit for this. Signed-off-by: Charles Perry Acked-by: Conor Dooley Link: https://patch.msgid.link/20260408131821.1145334-2-charles.perry@microchip.com Signed-off-by: Jakub Kicinski

dt-bindings: net: dsa: nxp,sja1105: make spi-cpol optional for sja1110

2026-04-12T20:51:22Z

Currently, the binding requires 'spi-cpha' for SJA1105 and 'spi-cpol' for SJA1110. However, the SJA1110 supports both SPI modes 0 and 2. Mode 2 (cpha=0, cpol=1) is used by the NXP LX2160 Bluebox 3. On the SolidRun i.MX8DXL HummingBoard Telematics, mode 0 is stable, while forcing mode 2 introduces CRC errors especially during bursts. Drop the requirement on spi-cpol for SJA1110. Fixes: af2eab1a8243 ("dt-bindings: net: nxp,sja1105: document spi-cpol/cpha") Signed-off-by: Josua Mayer Acked-by: Conor Dooley Link: https://patch.msgid.link/20260409-imx8dxl-sr-som-v2-1-83ff20629ba0@solid-run.com Signed-off-by: Jakub Kicinski

Merge tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2026-04-12T16:17:42Z

Johannes Berg says: ==================== Final updates, notably: - crypto: move Michael MIC code into wireless (only) - mac80211: - multi-link 4-addr support - NAN data support (but no drivers yet) - ath10k: DT quirk to make it work on some devices - ath12k: IPQ5424 support - rtw89: USB improvements for performance * tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits) wifi: cfg80211: Explicitly include in michael-mic.c wifi: ath10k: Add device-tree quirk to skip host cap QMI requests dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests crypto: Remove michael_mic from crypto_shash API wifi: ipw2x00: Use michael_mic() from cfg80211 wifi: ath12k: Use michael_mic() from cfg80211 wifi: ath11k: Use michael_mic() from cfg80211 wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211 wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic() wifi: libertas_tf: refactor endpoint lookup wifi: libertas: refactor endpoint lookup wifi: at76c50x: refactor endpoint lookup wifi: ath12k: Enable IPQ5424 WiFi device support wifi: ath12k: Add CE remap hardware parameters for IPQ5424 wifi: ath12k: add ath12k_hw_regs for IPQ5424 wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424 wifi: ath12k: Add ath12k_hw_params for IPQ5424 dt-bindings: net: wireless: add ath12k wifi device IPQ5424 wifi: ath10k: fix station lookup failure during disconnect wifi: ath12k: Create symlink for each radio in a wiphy ... ==================== Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski

dt-bindings: net: ti: k3-am654-cpsw-nuss: Add ti,j722s-cpsw-nuss compatible

2026-04-12T15:29:03Z

The J722S CPSW3G is mostly identical to the AM64's, but additionally supports SGMII. The AM64 compatible ti,am642-cpsw-nuss is used as a fallback. Signed-off-by: Nora Schiffer Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/191e9f7e3a6c14eabe891a98c5fb646766479c0a.1775558273.git.nora.schiffer@ew.tq-group.com Signed-off-by: Jakub Kicinski

dt-bindings: net: realtek,rtl82xx: Document realtek,*-ssc-enable property

2026-04-10T03:01:52Z

Document support for spread spectrum clocking (SSC) on RTL8211F(D)(I)-CG, RTL8211FS(I)(-VS)-CG, RTL8211FG(I)(-VS)-CG PHYs. Introduce DT properties 'realtek,clkout-ssc-enable', 'realtek,rxc-ssc-enable' and 'realtek,sysclk-ssc-enable' which control CLKOUT, RXC and SYSCLK SSC spread spectrum clocking enablement on these signals. These clock are not exposed via the clock API, therefore assigned-clock-sscs property does not apply. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260405233008.148974-2-marek.vasut@mailbox.org Signed-off-by: Jakub Kicinski

dt-bindings: net: realtek,rtl82xx: Keep property list sorted

2026-04-10T03:01:52Z

Sort the documented properties alphabetically, no functional change. Acked-by: Rob Herring (Arm) Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260405233008.148974-1-marek.vasut@mailbox.org Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-04-09T20:20:59Z

Cross-merge networking fixes after downstream PR (net-7.0-rc8). Conflicts: net/ipv6/seg6_iptunnel.c c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel") 78723a62b969a ("seg6: add per-route tunnel source address") https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk net/ipv4/icmp.c fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()") d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls") https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk Adjacent changes: drivers/net/ethernet/stmicro/stmmac/chain_mode.c 51f4e090b9f8 ("net: stmmac: fix integer underflow in chain mode") 6b4286e05508 ("net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY()") Signed-off-by: Jakub Kicinski

dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests

2026-04-08T17:13:09Z

Some firmware versions do not support the host-capability QMI request. Since this request occurs before firmware and board files are loaded, the quirk cannot be expressed in the firmware itself and must be described in the device tree. Signed-off-by: Amit Pundir Co-developed-by: David Heidelberg Signed-off-by: David Heidelberg Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260407-skip-host-cam-qmi-req-v5-1-dfa8a05c6538@ixit.cz Signed-off-by: Jeff Johnson

dt-bindings: net: wireless: add ath12k wifi device IPQ5424

2026-04-08T00:28:21Z

Add the device-tree bindings for the ATH12K AHB wifi device IPQ5424. Signed-off-by: Raj Kumar Bhagat Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260407-ath12k-ipq5424-v5-1-8e96aa660ec4@oss.qualcomm.com Signed-off-by: Jeff Johnson