linux/Documentation/devicetree/bindings/reset, branch master

dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset

2026-04-01T16:13:55Z

Document USB2PHY reset controller bindings for RZ/G3E ("R9A09G047") SoC. The RZ/G3E USB2PHY reset controller is functionally identical to the one found on the RZ/V2H(P), so no driver changes are needed. The existing "renesas,r9a09g057-usb2phy-reset" will be used as a fallback compatible for this IP. Acked-by: Conor Dooley Signed-off-by: Tommaso Merciai Signed-off-by: Philipp Zabel

dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property

2026-04-01T16:13:55Z

Add the '#mux-state-cells' property to support describing the USB VBUS_SEL multiplexer as a mux-controller in the Renesas RZ/V2H(P) USB2PHY binding. The mux-controller cannot be integrated into the parent USB2PHY node because the VBUS source selector is part of a separate hardware block, not the USB2PHY block itself. This is required to properly configure USB PHY power selection on RZ/V2H(P) and RZ/G3E SoCs. Acked-by: Krzysztof Kozlowski Signed-off-by: Tommaso Merciai Signed-off-by: Philipp Zabel

Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-12-06T01:29:04Z

Pull SoC driver updates from Arnd Bergmann: "This is the first half of the driver changes: - A treewide interface change to the "syscore" operations for power management, as a preparation for future Tegra specific changes - Reset controller updates with added drivers for LAN969x, eic770 and RZ/G3S SoCs - Protection of system controller registers on Renesas and Google SoCs, to prevent trivially triggering a system crash from e.g. debugfs access - soc_device identification updates on Nvidia, Exynos and Mediatek - debugfs support in the ST STM32 firewall driver - Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI - Cleanups for memory controller support on Nvidia and Renesas" * tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits) memory: tegra186-emc: Fix missing put_bpmp Documentation: reset: Remove reset_controller_add_lookup() reset: fix BIT macro reference reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe reset: th1520: Support reset controllers in more subsystems reset: th1520: Prepare for supporting multiple controllers dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets reset: remove legacy reset lookup code clk: davinci: psc: drop unused reset lookup reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support reset: eswin: Add eic7700 reset driver dt-bindings: reset: eswin: Documentation for eic7700 SoC reset: sparx5: add LAN969x support dt-bindings: reset: microchip: Add LAN969x support soc: rockchip: grf: Add select correct PWM implementation on RK3368 soc/tegra: pmc: Add USB wake events for Tegra234 amba: tegra-ahb: Fix device leak on SMMU enable ...

dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys

2025-11-18T16:52:54Z

TH1520 SoC is divided into several subsystems, most of them have distinct reset controllers. Let's document reset controllers other than the one for VO subsystem and IDs for their reset signals. Signed-off-by: Yao Zi Acked-by: Rob Herring (Arm) Reviewed-by: Drew Fustini Acked-by: Guo Ren Signed-off-by: Philipp Zabel

dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support

2025-11-18T16:52:54Z

The Renesas USB PHY hardware block needs to have the PWRRDY bit in the system controller set before applying any other settings. The PWRRDY bit must be controlled during power-on, power-off, and system suspend/resume sequences as follows: - during power-on/resume, it must be set to zero before enabling clocks and modules - during power-off/suspend, it must be set to one after disabling clocks and modules Add the renesas,sysc-pwrrdy device tree property, which allows the reset-rzg2l-usbphy-ctrl driver to parse, map, and control the system controller PWRRDY bit at the appropriate time. Along with it add a new compatible for the RZ/G3S SoC. Reviewed-by: Rob Herring (Arm) Signed-off-by: Claudiu Beznea Signed-off-by: Philipp Zabel

dt-bindings: reset: eswin: Documentation for eic7700 SoC

2025-11-18T16:52:54Z

Add device tree binding documentation and header file for the ESWIN eic7700 reset controller module. Signed-off-by: Yifeng Huang Signed-off-by: Xuyang Dong Reviewed-by: Krzysztof Kozlowski Signed-off-by: Philipp Zabel

dt-bindings: reset: microchip: Add LAN969x support

2025-11-18T16:52:53Z

LAN969x also uses the Microchip reset driver, it reuses the LAN966x support so use a fallback compatible. Signed-off-by: Robert Marko Acked-by: Conor Dooley Signed-off-by: Philipp Zabel

dt-bindings: Remove extra blank lines

2025-11-17T17:24:50Z

Generally at most 1 blank line is the standard style for DT schema files. Remove the few cases with more than 1 so that the yamllint check for this can be enabled. Acked-by: Lee Jones Reviewed-by: Mathieu Poirier # remoteproc Acked-by: Georgi Djakov Acked-by: Vinod Koul Acked-by: Andi Shyti Acked-by: Bartosz Golaszewski Acked-by: Jonathan Cameron Acked-by: Philipp Zabel Acked-by: Uwe Kleine-König # for allwinner,sun4i-a10-pwm.yaml Reviewed-by: Miquel Raynal # mtd Acked-by: Guenter Roeck Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Sebastian Reichel Acked-by: Manivannan Sadhasivam # For PCI controller bindings Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org Signed-off-by: Rob Herring (Arm)

dt-bindings: reset: add compatible for bcm63xx ephy control

2025-08-14T10:13:53Z

Add compatible string for bcm63xx ephy control. Signed-off-by: Kyle Hendry Acked-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250715234605.36216-3-kylehendrydev@gmail.com Signed-off-by: Philipp Zabel

dt-bindings: reset: Convert snps,dw-reset to DT schema

2025-07-03T09:04:54Z

Convert the Synopsys Designware Reset Controller binding to schema. It is a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250702222609.2760718-1-robh@kernel.org Signed-off-by: Philipp Zabel