linux/Documentation/devicetree/bindings/rtc, branch v4.3

Merge branch 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2015-09-08T23:16:26Z

Pull i2c updates from Wolfram Sang: "Features: - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx - core: scans DT and assigns wakeup interrupts. no driver changes needed. - core: some refcouting issues fixed and better API for that - core: new helper function for best effort block read emulation - slave framework: proper DT bindings and userspace instantiation - some bigger work for xiic, pxa, omap drivers .. and quite a number of smaller driver fixes, cleanups, improvements" * 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits) i2c: mux: reg Change ioread endianness for readback i2c: mux: reg: fix compilation warnings i2c: mux: reg: simplify register size checking i2c: muxes: fix leaked i2c adapter device node references i2c: allow specifying separate wakeup interrupt in device tree of/irq: export of_get_irq_byname() i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code i2c: Replace I2C_CROS_EC_TUNNEL dependency eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated i2c: core: Add support for best effort block read emulation i2c: lpc2k: add driver i2c: mux: Add register-based mux i2c-mux-reg i2c: dt: describe generic bindings i2c: slave: print warning if slave flag not set i2c: support 10 bit and slave addresses in sysfs 'new_device' i2c: take address space into account when checking for used addresses i2c: apply DT flags when probing i2c: make address check indpendent from client struct i2c: rename address check functions i2c: apply address offset for slaves, too ...

ARM: dts: AM437x: Add the internal and external clock nodes for rtc

2015-09-05T17:37:20Z

rtc can either be supplied from internal 32k clock or external crystal generated 32k clock. Internal clock is SOC specific and the external clock is board dependent. Adding the corresponding nodes. Signed-off-by: Keerthy Acked-by: Tony Lindgren Signed-off-by: Alexandre Belloni

devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc

2015-09-05T17:37:19Z

adds file for description on device node bindings for RTC found on Xilinx Zynq Ultrascale+ MPSoC. Signed-off-by: Suneel Garapati Signed-off-by: Alexandre Belloni

doc: dt: add documentation for nxp,lpc1788-rtc

2015-09-05T11:19:06Z

Document NXP LPC178x/18xx/408x/43xx bindings Signed-off-by: Joachim Eastwood Signed-off-by: Alexandre Belloni

Merge tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2015-09-04T18:35:03Z

Pull MFD updates from Lee Jones: "New Device Support: - New Clocksource driver from ST - New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms - Add support for Arizona WM8998 and WM1814 - Add support for Dialog Semi DA9062 and DA9063 - Add support for Kontron COMe-bBL6 and COMe-cBW6 - Add support for X-Powers AXP152 - Add support for Atmel, many - Add support for STMPE, many - Add support for USB in X-Powers AXP22X Core Frameworks: - New Base API to traverse devices and their children in reverse order Bug Fixes: - Fix race between runtime-suspend and IRQs - Obtain platform data form more reliable source Fix-ups: - Constifying things - Variable signage changes - Kconfig depends|selects changes - Make use of BIT() macro - Do not supply .owner attribute in *_driver structures - MAINTAINERS entries - Stop using set_irq_flags() - Start using irq_set_chained_handler_and_data() - Export DT device ID structures" * tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: jz4740-adc: Init mask cache in generic IRQ chip mfd: cros_ec: spi: Add OF match table mfd: stmpe: Add OF match table mfd: max77686: Split out regulator part from the DT binding mfd: Add DT binding for Maxim MAX77802 IC mfd: max77686: Use a generic name for the PMIC node in the example mfd: max77686: Don't suggest in binding to use a deprecated property mfd: Add MFD_CROS_EC dependencies mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs mfd: axp20x: Add missing registers, and mark more registers volatile mfd: arizona: Fixup some formatting/white space errors mfd: wm8994: Fix NULL pointer exception on missing pdata of: Add vendor prefix for Nuvoton mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event mfd: atmel-hlcdc: Add support for new SoCs mfd: Export OF module alias information in missing drivers mfd: stw481x: Export I2C module alias information mfd: da9062: Support for the DA9063 OnKey in the DA9062 core mfd: max899x: Avoid redundant irq_data lookup ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-09-01T20:09:20Z

Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...

Merge tag 'omap-for-v4.3/dt-pt4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

2015-08-18T20:33:48Z

Fix up bogus RTC compatible change for am4372 and add missing DPLL for am4372 cpsw Ethernet driver. Also add ARM global and local timers for am4372. * tag 'omap-for-v4.3/dt-pt4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: dts: am4372: Set the default clock rate for dpll_clksel_mac_clk clock ARM: dts: AM437X: add dpll_clksel_mac_clk node Signed-off-by: Olof Johansson

ARM: dts: AM4372: Add the am4372-rtc compatible string

2015-08-12T08:49:02Z

am4372-rtc string was already part of dts, introduced to identify the rtc specific to am4372 family of SoCs. It was removed in one of the previous patches. Adding back the same with appropriate documentation. Signed-off-by: Keerthy Signed-off-by: Tony Lindgren

rtc: bq32k: move binding docs to proper place

2015-08-10T06:37:37Z

The I2C dir is not for I2C client devices! Move it to the proper folder. Signed-off-by: Wolfram Sang Acked-by: Pavel Machek

Documentation: dt: rtc: at91rm9200: add clocks property

2015-08-07T09:57:31Z

The RTC needs an input clock, it is the slow clock. It is required as it will not function without it. Acked-by: Boris Brezillon Signed-off-by: Alexandre Belloni