Mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ https://git.shady.money/linux/atom?h=master 2026-04-19T15:47:40Z 2026-04-19T15:47:40Z Linus Torvalds torvalds@linux-foundation.org 2026-04-19T15:47:40Z urn:sha1:99ef60d119f3b2621067dd5fc1ea4a37360709e4 Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 7.1-rc1. Lots of little things in here, nothing major, just constant improvements, updates, and new features. Highlights are: - new USB power supply driver support. These changes did touch outside of drivers/usb/ but got acks from the relevant mantainers for them. - dts file updates and conversions - string function conversions into "safer" ones - new device quirks - xhci driver updates - usb gadget driver minor fixes - typec driver additions and updates - small number of thunderbolt driver changes - dwc3 driver updates and additions of new hardware support - other minor driver updates All of these have been in the linux-next tree for a while with no reported issues" * tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits) usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller dt-bindings: usb: dwc3: add support for StarFive JHB100 dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node drivers/usb/host: Fix spelling error 'seperate' -> 'separate' usbip: tools: add hint when no exported devices are found USB: serial: iuu_phoenix: fix iuutool author name usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb() usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete() usb: gadget: f_hid: Add missing error code usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding USB: of: Simplify with scoped for each OF child loop usbip: validate number_of_packets in usbip_pack_ret_submit() usb: gadget: renesas_usb3: validate endpoint index in standard request handlers usb: core: config: reverse the size check of the SSP isoc endpoint descriptor usb: typec: ucsi: Set usb mode on partner change ... 2026-04-19T15:44:41Z Linus Torvalds torvalds@linux-foundation.org 2026-04-19T15:44:41Z urn:sha1:73398c2772d04ee656a654c63db85851381cd147 Pull tty/serial updates from Greg KH: "Here is the set of tty and serial driver changes for 7.1-rc1. Not much here this cycle, biggest thing is the removal of an old driver that never got any actual hardware support (esp32), and the second try to moving the tty ports to their own workqueues (first try was in 7.0-rc1 but was reverted due to problems) Otherwise it's just a small set of driver updates and some vt modifier key enhancements. All have been in linux-next for a while with no reported issues" * tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (35 commits) tty: serial: ip22zilog: Fix section mispatch warning hvc/xen: Check console connection flag serial: sh-sci: Add support for RZ/G3L RSCI dt-bindings: serial: renesas,rsci: Document RZ/G3L SoC tty: atmel_serial: update outdated reference to atmel_tasklet_func() serial: xilinx_uartps: Drop unused include serial: qcom-geni: drop stray newline format specifier serial: 8250: loongson: Enable building on MIPS Loongson64 dt-bindings: serial: 8250: Add Loongson 3A4000 uart compatible serial: 8250_fintek: Add support for F81214E tty: tty_port: add workqueue to flip TTY buffer vt: support ITU-T T.416 color subparameters serial: qcom-geni: Fix RTS behavior with flow control tty: serial: imx: keep dma request disabled before dma transfer setup tty: serial: 8250: Add SystemBase Multi I/O cards serial: pic32_uart: allow driver to be compiled on all architectures with COMPILE_TEST serial: tegra: remove Kconfig dependency on APB DMA controller dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9 dt-bindings: serial: atmel,at91-usart: add microchip,lan9691-usart serial: auart: check clk_enable() return in console write ... 2026-04-18T23:59:09Z Linus Torvalds torvalds@linux-foundation.org 2026-04-18T23:59:09Z urn:sha1:faeab166167f5787719eb8683661fd41a3bb1514 Pull pin control updates from Linus Walleij: "Core changes: - Perform basic checks on pin config properties so as not to allow directly contradictory settings such as setting a pin to more than one bias or drive mode - Handle input-threshold-voltage-microvolt property - Introduce pinctrl_gpio_get_config() handling in the core for SCMI GPIO using pin control New drivers: - GPIO-by-pin control driver (also appearing in the GPIO pull request) fulfilling a promise on a comment from Grant Likely many years ago: "can't GPIO just be a front-end for pin control?" it turns out it can, if and only if you design something new from scratch, such as SCMI - Broadcom BCM7038 as a pinctrl-single delegate - Mobileye EyeQ6Lplus OLB pin controller - Qualcomm Eliza and Hawi families TLMM pin controllers - Qualcomm SDM670 and Milos family LPASS LPI pin controllers - Qualcomm IPQ5210 pin controller - Realtek RTD1625 pin controller support - Rockchip RV1103B pin controller support - Texas Instruments AM62L as a pinctrl-single delegate Improvements: - Set config implementation for the Spacemit K1 pin controller" * tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (84 commits) pinctrl: qcom: Add Hawi pinctrl driver dt-bindings: pinctrl: qcom: Describe Hawi TLMM block dt-bindings: pinctrl: pinctrl-max77620: convert to DT schema pinctrl: single: Add bcm7038-padconf compatible matching dt-bindings: pinctrl: pinctrl-single: Add brcm,bcm7038-padconf dt-bindings: pinctrl: apple,pinctrl: Add t8122 compatible pinctrl: qcom: sdm670-lpass-lpi: label variables as static pinctrl: sophgo: pinctrl-sg2044: Fix wrong module description pinctrl: sophgo: pinctrl-sg2042: Fix wrong module description pinctrl: qcom: add sdm670 lpi tlmm dt-bindings: pinctrl: qcom: Add SDM670 LPASS LPI pinctrl dt-bindings: qcom: lpass-lpi-common: add reserved GPIOs property pinctrl: qcom: Introduce IPQ5210 TLMM driver dt-bindings: pinctrl: qcom: add IPQ5210 pinctrl pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs pinctrl: qcom: eliza: Fix interrupt target bit pinctrl: core: Don't use "proxy" headers pinctrl: amd: Support new ACPI ID AMDI0033 pinctrl: renesas: rzg2l: Drop superfluous blank line pinctrl: renesas: rzg2l: Fix save/restore of {IOLH,IEN,PUPD,SMT} registers ... 2026-04-18T16:44:22Z Linus Torvalds torvalds@linux-foundation.org 2026-04-18T16:44:22Z urn:sha1:fba676bd2919ceff5a678c0bd05ab3ac89affaeb Pull i2c updates from Wolfram Sang: "The biggest news in this pull request is that it will start the last cycle of me handling the I2C subsystem. From 7.2. on, I will pass maintainership to Andi Shyti who has been maintaining the I2C drivers for a while now and who has done a great job in doing so. We will use this cycle for a hopefully smooth transition. Thanks must go to Andi for stepping up! I will still be around for guidance. Updates: - generic cleanups in npcm7xx, qcom-cci, xiic and designware DT bindings - atr: use kzalloc_flex for alias pool allocation - ixp4xx: convert bindings to DT schema - ocores: use read_poll_timeout_atomic() for polling waits - qcom-geni: skip extra TX DMA TRE for single read messages - s3c24xx: validate SMBus block length before using it - spacemit: refactor xfer path and add K1 PIO support - tegra: identify DVC and VI with SoC data variants - tegra: support SoC-specific register offsets - xiic: switch to devres and generic fw properties - xiic: skip input clock setup on non-OF systems - various minor improvements in other drivers rtl9300: - add per-SoC callbacks and clock support for RTL9607C - add support for new 50 kHz and 2.5 MHz bus speeds - general refactoring in preparation for RTL9607C support New support: - DesignWare GOOG5000 (ACPI HID) - Intel Nova Lake (ACPI ID) - Realtek RTL9607C - SpacemiT K3 binding - Tegra410 register layout support" * tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (40 commits) i2c: usbio: Add ACPI device-id for NVL platforms i2c: qcom-geni: Avoid extra TX DMA TRE for single read message in GPI mode i2c: atr: use kzalloc_flex i2c: spacemit: introduce pio for k1 i2c: spacemit: move i2c_xfer_msg() i2c: xiic: skip input clock setup on non-OF systems i2c: xiic: use numbered adapter registration i2c: xiic: cosmetic: use resource format specifier in debug log i2c: xiic: cosmetic cleanup i2c: xiic: switch to generic device property accessors i2c: xiic: remove duplicate error message i2c: xiic: switch to devres managed APIs i2c: rtl9300: add RTL9607C i2c controller support i2c: rtl9300: introduce new function properties to driver data i2c: rtl9300: introduce clk struct for upcoming rtl9607 support dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C support i2c: rtl9300: introduce a property for 8 bit width reg address i2c: rtl9300: introduce F_BUSY to the reg_fields struct i2c: rtl9300: introduce max length property to driver data i2c: rtl9300: split data_reg into read and write reg ... 2026-04-18T00:57:04Z Linus Torvalds torvalds@linux-foundation.org 2026-04-18T00:57:04Z urn:sha1:8541d8f725c673db3bd741947f27974358b2e163 Pull MTD updates from Miquel Raynal: "MTD changes: - mtdconcat finally makes it in, after several years of being merged and reverted - Baikal SoC support is being removed, so MTD bits are being removed as well - misc cleanups NAND changes: - SunXi driver support for new versions of the Allwinner NAND controller. - DT-binding improvements and cleanups. - A few fixes (Realtek ECC and Winbond SPI NAND), aside with the usual load of misc changes. SPI NOR fixes: - Enable die erase on MT35XU02GCBA. We knew this flash needed this fixup since 7f77c561e227 ("mtd: spi-nor: micron-st: add TODO for fixing mt35xu02gcba") but did not add it due to lack of hardware to test on. - Fix locking on some Winbond w25q series flashes. - Fix Auto Address Increment (AAI) writes on SST that flashes that start on odd address. The write enable latch needs to be set again after the single byte program" * tag 'mtd/for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (44 commits) mtd: spinand: winbond: Declare the QE bit on W25NxxJW mtd: spi-nor: micron-st: Enable die erase support for MT35XU02GCBA mtd: spi-nor: winbond: Fix locking support for w25q256jw mtd: spi-nor: sst: Fix write enable before AAI sequence mtd: spi-nor: winbond: Fix locking support for w25q64jvm mtd: spi-nor: winbond: Fix locking support for w25q256jwm dt-bindings: mtd: mxc-nand: add missing compatible string and ref to nand-controller-legacy.yaml dt-bindings: mtd: gpmi-nand: ref to nand-controller-legacy.yaml dt-bindings: mtd: refactor NAND bindings and add nand-controller-legacy.yaml mtd: spinand: winbond: Clarify when to enable the HS bit mtd: rawnand: sunxi: introduce maximize variable user data length mtd: rawnand: sunxi: fix typos in comments mtd: rawnand: sunxi: change error prone variable name mtd: rawnand: sunxi: remove dead code mtd: rawnand: sunxi: make the code more self-explanatory mtd: rawnand: sunxi: replace hard coded value by a define - take2 mtd: rawnand: sunxi: do not count BBM bytes twice mtd: rawnand: sunxi: fix sunxi_nfc_hw_ecc_read_extra_oob mtd: rawnand: sunxi: sunxi_nand_ooblayout_free code clarification mtd: cmdlinepart: use a flexible array member ... 2026-04-17T21:16:15Z Linus Torvalds torvalds@linux-foundation.org 2026-04-17T21:16:15Z urn:sha1:d65218de87c4bfa879bc453c3050d3851c353dcc Pull remoteproc updates from Bjorn Andersson: - Move requesting of IRQs in TI Keystone driver to probe time instead of remoteproc start, to allow better handling of errors. - Introduce support for more than 10 entries in the Qualcomm minidump implementation. - Add audio DSP remoteproc support for the Qualcomm Eliza platform. Add modem remoteproc support for the Qualcomm MDM9607, MSM8917, MSM8937, and MSM8940 platforms. - Add list of Qualcomm QMI service ids to the QMI header file, in order to avoid sprinkling them across the various drivers using them. Migrate sysmon to use this constant. - Fix several issues related to DeviceTree parsing and mailbox handling in the Xilinx R5F remote processor driver. - Fix incorrect error checks in reserved memory handling and polish the code across i.MX and TI drivers. * tag 'rproc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (35 commits) remoteproc: qcom: pas: Add Eliza ADSP support dt-bindings: remoteproc: qcom,milos-pas: Document Eliza ADSP remoteproc: qcom: Add missing space before closing bracket dt-bindings: remoteproc: qcom: Drop types for firmware-name remoteproc: qcom: Fix minidump out-of-bounds access on subsystems array dt-bindings: remoteproc: k3-r5f: Add memory-region-names dt-bindings: remoteproc: k3-r5f: Split up memory regions remoteproc: use SIZE_MAX in rproc_u64_fit_in_size_t() dt-bindings: remoteproc: qcom,sm8550-pas: Add Glymur CDSP dt-bindings: remoteproc: qcom,sm8550-pas: Add Glymur ADSP remoteproc: xlnx: Release mailbox channels on shutdown remoteproc: sysmon: Use the unified QMI service ID instead of defining it locally remoteproc: xlnx: Only access buffer information if IPI is buffered remoteproc: xlnx: Avoid mailbox setup remoteproc: keystone: Request IRQs in probe() remoteproc: pru: Remove empty remove callback remoteproc: pru: Use rproc_of_parse_firmware() to get firmware name remoteproc: da8xx: Reorder resource fetching in probe() remoteproc: da8xx: Remove unused local struct data remoteproc: da8xx: Use dev_err_probe() ... 2026-04-17T21:09:02Z Linus Torvalds torvalds@linux-foundation.org 2026-04-17T21:09:02Z urn:sha1:e2d10998e4293a27c0389870b5fdf736a71d61ef Pull devicetree updates from Rob Herring: "DT core: - Cleanup of the reserved memory code to keep CMA specifics in CMA code - Add and convert several users to new of_machine_get_match() helper - Validate nul termination in string properties - Update dtc to upstream v1.7.2-69-g53373d135579 - Limit matching reserved memory devices to /reserved-memory nodes - Fix some UAF in unittests - Remove Baikal SoC bus driver - Fix false DT_SPLIT_BINDING_PATCH checkpatch warning - Allow fw_devlink device-tree on x86 - Fix kerneldoc return description for of_property_count_elems_of_size() DT bindings: - Add fsl,imx25-aips, fsl,imx25-tcq, qcom,eliza-pdc, qcom,eliza-spmi-pmic-arb, qcom,hawi-imem, qcom,milos-imem, qcom,hawi-pdc, and lg,sw49410 bindings - Convert arm,vexpress-scc to DT schema - Deprecate Qualcomm generic CPU compatibles. Add Apple M3 CPU cores. - Move some dual-link display panels to the dual-link schema - Drop mux controller node name constraints - Remove Baikal SoC bus bindings - Fix a false warning in the thermal trip node binding" * tag 'devicetree-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits) dt-bindings: display: panel: panel-simple: Add lg,sw49410 compatible dt-bindings: display: ti, am65x-dss: Fix AM62L DSS reg and clock constraints dt-bindings: display: simple: Move Innolux G156HCE-L01 panel to dual-link dt-bindings: display: simple: Move AUO 21.5" FHD to dual-link dt-bindings: thermal: Fix false warning with 'phandle' in trips nodes of: unittest: fix use-after-free in testdrv_probe() of: unittest: fix use-after-free in of_unittest_changeset() dt-bindings: qcom,pdc: document the Hawi Power Domain Controller dt-bindings: ARM: arm,vexpress-scc: convert to DT schema drivers/of: fdt: validate flat DT string properties before string use drivers/of: fdt: validate stdout-path properties before parsing them dt-bindings: sram: Document qcom,hawi-imem compatible dt-bindings: sram: Allow multiple-word prefixes to sram subnode dt-bindings: sram: Document qcom,milos-imem scripts/dtc: Update to upstream version v1.7.2-69-g53373d135579 of: property: Allow fw_devlink device-tree on x86 dt-bindings: arm: cpus: Add Apple M3 CPU core compatibles dt-bindings: display: lt8912b: Drop redundant endpoint properties dt-bindings: opp-v2: Fix example 3 CPU reg value dt-bindings: connector: add pd-disable dependency ... 2026-04-17T20:50:10Z Linus Torvalds torvalds@linux-foundation.org 2026-04-17T20:50:10Z urn:sha1:430cc9f42b44d174230f646767e1403699645ec5 Pull hte updates from Dipen Patel: - Add tegra264 HTE driver and dt binding support - Remove tegra194 SoC Kconfig dependency - Replace use of system_unbound_wq with system_dfl_wq * tag 'for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux: hte: tegra194: Add Tegra264 GTE support dt-bindings: timestamp: Add Tegra264 support hte: tegra194: remove Kconfig dependency on Tegra194 SoC hte: replace use of system_unbound_wq with system_dfl_wq 2026-04-17T19:51:05Z Miquel Raynal miquel.raynal@bootlin.com 2026-04-17T19:51:05Z urn:sha1:b2a4fe0960aee9a2c8045cfd26fbeacf30b26efe The main changes happened in the SunXi driver in order to support new versions of the Allwinner NAND controller. There are also some DT-binding improvements and cleanups. Finally a couple of actual fixes (Realtek ECC and Winbond SPI NAND), aside with the usual load of misc changes. 2026-04-17T18:41:33Z Linus Torvalds torvalds@linux-foundation.org 2026-04-17T18:41:33Z urn:sha1:59bd5ae0db22566e2b961742126269c151d587c7 Pull power supply and reset updates from Sebastian Reichel: "Power-supply drivers: - S2MU005: new battery fuel gauge driver - macsmc-power: new driver for Apple Silicon - qcom_battmgr: Add support for Glymur and Kaanapali - max17042: add support for max77759 - qcom_smbx: allow disabling charging - bd71828: add input current limit support - multiple drivers: use new device managed workqueue allocation function - misc small cleanups and fixes Reset core: - Expose sysfs for registered reboot_modes Reset drivers - misc small cleanups and fixes" * tag 'for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (36 commits) power: supply: qcom_smbx: allow disabling charging power: reset: drop unneeded dependencies on OF_GPIO power: supply: bd71828: add input current limit property dt-bindings: power: reset: cortina,gemini-power-controller: convert to DT schema power: supply: add support for S2MU005 battery fuel gauge device dt-bindings: power: supply: document Samsung S2MU005 battery fuel gauge power: reset: reboot-mode: fix -Wformat-security warning power: supply: ipaq_micro: Simplify with devm power: supply: mt6370: Simplify with devm_alloc_ordered_workqueue() power: supply: max77705: Free allocated workqueue and fix removal order power: supply: max77705: Drop duplicated IRQ error message power: supply: cw2015: Free allocated workqueue power: reset: keystone: Use register_sys_off_handler(SYS_OFF_MODE_RESTART) power: supply: twl4030_madc: Drop unused header includes power: supply: bq24190: Avoid rescheduling after cancelling work power: supply: axp288_charger: Simplify returns of dev_err_probe() power: supply: axp288_charger: Do not cancel work before initializing it power: supply: cpcap-battery: pass static battery cell data from device tree dt-bindings: power: supply: cpcap-battery: document monitored-battery property power: supply: qcom_battmgr: Add support for Glymur and Kaanapali ...