linux/Documentation/driver-api, branch v5.19

Merge tag 'drm-misc-fixes-2022-06-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

2022-06-30T23:27:55Z

A NULL pointer dereference fix for vc4, and 3 patches to improve the sysfb device behaviour when removing conflicting framebuffers Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220630072404.2fa4z3nk5h5q34ci@houat

firmware: sysfb: Add sysfb_disable() helper function

2022-06-29T07:51:41Z

This can be used by subsystems to unregister a platform device registered by sysfb and also to disable future platform device registration in sysfb. Suggested-by: Daniel Vetter Signed-off-by: Javier Martinez Canillas Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-3-javierm@redhat.com

docs: driver-api: gpio: Fix filename mismatch

2022-06-13T16:12:24Z

The filenames were changed a while ago, but board.rst, consumer.rst and intro.rst still refer to the old names. Fix those references to match the Actual names and avoid possible confusion. Signed-off-by: Tom Schwindl Signed-off-by: Bartosz Golaszewski

docs: Move the HTE documentation to driver-api/

2022-06-09T16:02:47Z

The hardware timestamp engine documentation is driver API material, and really belongs in the driver-API book; move it there. Cc: Thierry Reding Acked-by: Dipen Patel Signed-off-by: Jonathan Corbet

Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-06-03T18:48:47Z

Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ...

Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-06-03T18:08:40Z

Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...

Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio

2022-06-01T20:49:15Z

Pull vfio updates from Alex Williamson: - Improvements to mlx5 vfio-pci variant driver, including support for parallel migration per PF (Yishai Hadas) - Remove redundant iommu_present() check (Robin Murphy) - Ongoing refactoring to consolidate the VFIO driver facing API to use vfio_device (Jason Gunthorpe) - Use drvdata to store vfio_device among all vfio-pci and variant drivers (Jason Gunthorpe) - Remove redundant code now that IOMMU core manages group DMA ownership (Jason Gunthorpe) - Remove vfio_group from external API handling struct file ownership (Jason Gunthorpe) - Correct typo in uapi comments (Thomas Huth) - Fix coccicheck detected deadlock (Wan Jiabing) - Use rwsem to remove races and simplify code around container and kvm association to groups (Jason Gunthorpe) - Harden access to devices in low power states and use runtime PM to enable d3cold support for unused devices (Abhishek Sahu) - Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe) - Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe) - Pass KVM pointer directly rather than via notifier (Matthew Rosato) * tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits) vfio: remove VFIO_GROUP_NOTIFY_SET_KVM vfio/pci: Add driver_managed_dma to the new vfio_pci drivers vfio: Do not manipulate iommu dma_owner for fake iommu groups vfio/pci: Move the unused device into low power state with runtime PM vfio/pci: Virtualize PME related registers bits and initialize to zero vfio/pci: Change the PF power state to D0 before enabling VFs vfio/pci: Invalidate mmaps and block the access in D3hot power state vfio: Change struct vfio_group::container_users to a non-atomic int vfio: Simplify the life cycle of the group FD vfio: Fully lock struct vfio_group::container vfio: Split up vfio_group_get_device_fd() vfio: Change struct vfio_group::opened from an atomic to bool vfio: Add missing locking for struct vfio_group::kvm kvm/vfio: Fix potential deadlock problem in vfio include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead vfio/pci: Use the struct file as the handle not the vfio_group kvm/vfio: Remove vfio_group from kvm vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm() vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent() vfio: Remove vfio_external_group_match_file() ...

Merge tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

2022-06-01T17:49:11Z

Pull pwm updates from Thierry Reding: "Quite a large number of conversions this time around, courtesy of Uwe who has been working tirelessly on these. No drivers of the legacy API are left at this point, so as a next step the old API can be removed. Support is added for a few new devices such as the Xilinx AXI timer- based PWMs and the PWM IP found on Sunplus SoCs. Other than that, there's a number of fixes, cleanups and optimizations" * tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits) pwm: pwm-cros-ec: Add channel type support dt-bindings: google,cros-ec-pwm: Add the new -type compatible dt-bindings: Add mfd/cros_ec definitions pwm: Document that the pinstate of a disabled PWM isn't reliable pwm: twl-led: Implement .apply() callback pwm: lpc18xx: Implement .apply() callback pwm: mediatek: Implement .apply() callback pwm: lpc32xx: Implement .apply() callback pwm: tegra: Implement .apply() callback pwm: stmpe: Implement .apply() callback pwm: sti: Implement .apply() callback pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795 dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC pwm: tegra: Optimize period calculation pwm: renesas-tpu: Improve precision of period and duty_cycle calculation pwm: renesas-tpu: Improve maths to compute register settings pwm: renesas-tpu: Rename variables to match the usual naming pwm: renesas-tpu: Implement .apply() callback pwm: renesas-tpu: Make use of devm functions pwm: renesas-tpu: Make use of dev_err_probe() ...

Merge tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2022-05-29T18:38:27Z

Pull dmaengine updates from Vinod Koul: "Nothing special, this includes a couple of new device support and new driver support and bunch of driver updates. New support: - Tegra gpcdma driver support - Qualcomm SM8350, Sm8450 and SC7280 device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - deprecate '#dma-channels' & '#dma-requests' bindings - driver updates for stm32, ptdma idsx etc" * tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits) dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled dmaengine: sun6i: Add support for the D1 variant dmaengine: sun6i: Add support for 34-bit physical addresses dmaengine: sun6i: Do not use virt_to_phys dt-bindings: dma: sun50i-a64: Add compatible for D1 dmaengine: tegra: Remove unused switch case dmaengine: tegra: Fix uninitialized variable usage dmaengine: stm32-dma: add device_pause/device_resume support dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done() dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor dmaengine: qcom: gpi: Add support for sc7280 dt-bindings: dma: pl330: Add power-domains dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler() dmaengine: stm32-mdma: remove GISR1 register dmaengine: ti: deprecate '#dma-channels' dmaengine: mmp: deprecate '#dma-channels' dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests' ...

Merge tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-05-28T18:15:54Z

Pull pin control updates from Linus Walleij: "Pretty big this time. Mostly due to (nice) Renesas refactorings. Core changes: - New helpers from Andy such as for_each_gpiochip_node() affecting both GPIO and pin control, improving a bunch of drivers in the process. - Pulled in Marc Zyngiers work to make IRQ chips immutable, and started to apply fixups on top. New drivers: - New driver for Marvell MVEBU 98DX2530. - New driver for Mediatek MT8195. - Support Qualcomm PMX65 and PM6125. - New driver for Qualcomm SC7280 LPASS pin control. - New driver for Rockchip RK3588. - New driver for NXP Freescale i.MXRT1170. - New driver for Mediatek MT6795 Helio X10. Improvements: - Several Aspeed G6 cleanups and non-critical fixes. - Thorought refactoring of some of the ever improving Renesas drivers. - Clean up Mediatek MT8192 bindings a bit. - PWM output and clock monitoring in the Ocelot LAN966x driver. - Thorough refactoring and cleanup of the Ralink drivers such as RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into proper sub-drivers" * tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits) pinctrl: apple: Use a raw spinlock for the regmap pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs pinctrl: intel: Fix kernel doc format, i.e. add return sections dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent' pinctrl: starfive: Make the irqchip immutable pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10 dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings pinctrl: freescale: Add i.MXRT1170 pinctrl driver support dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation dt-bindings: pinctrl: rockchip: increase max amount of device functions dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges' dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable' dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU pinctrl: qcom: spmi-gpio: Add pm6125 compatible dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl pinctrl: intel: make irq_chip immutable pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask() ...