linux/Documentation/driver-model, branch v3.12

Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

2013-09-10T20:37:36Z

Pull slave-dmaengine updates from Vinod Koul: "This pull brings: - Andy's DW driver updates - Guennadi's sh driver updates - Pl08x driver fixes from Tomasz & Alban - Improvements to mmp_pdma by Daniel - TI EDMA fixes by Joel - New drivers: - Hisilicon k3dma driver - Renesas rcar dma driver - New API for publishing slave driver capablities - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits) dma: edma: Remove limits on number of slots dma: edma: Leave linked to Null slot instead of DUMMY slot dma: edma: Find missed events and issue them ARM: edma: Add function to manually trigger an EDMA channel dma: edma: Write out and handle MAX_NR_SG at a given time dma: edma: Setup parameters to DMA MAX_NR_SG at a time dmaengine: pl330: use dma_set_max_seg_size to set the sg limit dmaengine: dma_slave_caps: remove sg entries dma: replace devm_request_and_ioremap by devm_ioremap_resource dma: ste_dma40: Fix potential null pointer dereference dma: ste_dma40: Remove duplicate const dma: imx-dma: Remove redundant NULL check dma: dmagengine: fix function names in comments dma: add driver for R-Car HPB-DMAC dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap() dma: imx-sdma: Staticize sdma_driver_data structures pch_dma: Add MODULE_DEVICE_TABLE dmaengine: PL08x: Add cyclic transfer support dmaengine: PL08x: Fix reading the byte count in cctl dmaengine: PL08x: Add support for different maximum transfer size ...

acpi-dma, doc: append managed function to the list

2013-08-25T11:13:45Z

ACPI DMA provides managed function to register the slave DMA controller in the internal container. This patch anounces that function in the corresponding documentation file. Signed-off-by: Andy Shevchenko Cc: Rob Landley Signed-off-by: Vinod Koul

iio: trigger: implement devm_iio_trigger_alloc/devm_iio_triger_free

2013-08-17T18:34:52Z

Add a resource managed devm_iio_trigger_alloc()/devm_iio_triger_free() to automatically clean up triggers allocated by IIO drivers, thus leading to simplified IIO drivers code. Signed-off-by: Jacek Anaszewski Signed-off-by: Kyunmin Park Signed-off-by: Jonathan Cameron

Documentation: devres: add IIO device alloc/free functions to list

2013-08-03T17:41:18Z

Add devm_iio_device_alloc() and devm_iio_device_free() functions to list of supported calls. Signed-off-by: Oleksandr Kravchenko Signed-off-by: Jonathan Cameron

lib: devres: Introduce devm_ioremap_resource()

2013-01-22T17:41:43Z

The devm_request_and_ioremap() function is very useful and helps avoid a whole lot of boilerplate. However, one issue that keeps popping up is its lack of a specific error code to determine which of the steps that it performs failed. Furthermore, while the function gives an example and suggests what error code to return on failure, a wide variety of error codes are used throughout the tree. In an attempt to fix these problems, this patch adds a new function that drivers can transition to. The devm_ioremap_resource() returns a pointer to the remapped I/O memory on success or an ERR_PTR() encoded error code on failure. Callers can check for failure using IS_ERR() and determine its cause by extracting the error code using PTR_ERR(). devm_request_and_ioremap() is implemented as a wrapper around the new API and return NULL on failure as before. This ensures that backwards compatibility is maintained until all users have been converted to the new API, at which point the old devm_request_and_ioremap() function should be removed. A semantic patch is included which can be used to convert from the old devm_request_and_ioremap() API to the new devm_ioremap_resource() API. Some non-trivial cases may require manual intervention, though. Signed-off-by: Thierry Reding Cc: Arnd Bergmann Acked-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Documentation: devres: add PHY get/put functions to list of supported calls

2013-01-17T20:57:07Z

Signed-off-by: Marko Katic Signed-off-by: Greg Kroah-Hartman

pwm: add devm_pwm_get() and devm_pwm_put()

2012-09-10T15:05:45Z

Add resource managed variants of pwm_get() and pwm_put() for convenience. Code is largely inspired by the equivalent devm functions of the regulator framework. Signed-off-by: Alexandre Courbot Signed-off-by: Thierry Reding

Merge tag 'pinctrl-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2012-05-21T23:58:23Z

Pull pin control subsystem changes from Linus Walleij: - Generic Device Tree bindings and hooks for drivers so we can move over modern drivers to using this. - Device Tree bindings for Tegra SoCs. - Funneling some devicetree helper code for the drivers/of subsystem. - New pin control drivers for: * Freescale MXS * Freescale i.MX51 * Freescale i.MX53 All of these use Device Tree bindings. - Dummy pinctrl handles for stepwise migration to pinctrl, akin to dummy regulators. - Minor non-urgent fixes and improvments. Fix up trivial conflicts in Documentation/driver-model/devres.txt and drivers/pinctrl/core.c, * tag 'pinctrl-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (46 commits) pinctrl: pinctrl-imx: add imx51 pinctrl driver pinctrl: pinctrl-imx: add imx53 pinctrl driver pinctrl: pinctrl-pxa3xx: remove empty pinmux disable function pinctrl: pinctrl-mxs: remove empty pinmux disable function pinctrl: pinctrl-imx: remove empty pinmux disable function pinctrl: make pinmux disable function optional pinctrl: a minor error checking improvement for pinconf pinctrl: mxs: skip gpio nodes for group creation pinctrl: mxs: create group for pin config node pinctrl: (cosmetic) fix two entries in DocBook comments pinctrl: add more info to error msgs in pin_request pinctrl: add pinctrl-mxs support pinctrl: pinctrl-imx: add imx6q pinctrl driver pinctrl: pinctrl-imx: add imx pinctrl core driver dt: add of_get_child_count helper function pinctrl: support gpio request deferred probing pinctrl: add pinctrl_provide_dummies interface for platforms to use pinctrl: enhance reporting of errors when loading from DT pinctrl: add kerneldoc for pinctrl_ops device tree functions pinctrl: propagate map validation errors ...

ARM: 7376/1: clkdev: Implement managed clk_get()

2012-04-19T18:34:18Z

Allow clk API users to simplify their cleanup paths by providing a managed version of clk_get() and clk_put(). Signed-off-by: Mark Brown Signed-off-by: Russell King

pinctrl: implement devm_pinctrl_get()/put()

2012-04-18T11:53:13Z

These functions allow the driver core to automatically clean up any allocations made by drivers, thus leading to simplified drivers. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij