linux/Documentation, branch v3.12

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2013-10-23T06:47:42Z

Pull networking fixes from David Miller: "Sorry I let so much accumulate, I was in Buffalo and wanted a few things to cook in my tree for a while before sending to you. Anyways, it's a lot of little things as usual at this stage in the game" 1) Make bonding MAINTAINERS entry reflect reality, from Andy Gospodarek. 2) Fix accidental sock_put() on timewait mini sockets, from Eric Dumazet. 3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6 addresses, from François CACHEREUL. 4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan Carpenter. 5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric Dumazet. 6) SFC driver bug fixes from Ben Hutchings. 7) Fix TX packet scheduling wedge after channel change in ath9k driver, from Felix Fietkau. 8) Fix user after free in BPF JIT code, from Alexei Starovoitov. 9) Source address selection test is reversed in __ip_route_output_key(), fix from Jiri Benc. 10) VLAN and CAN layer mis-size netlink attributes, from Marc Kleine-Budde. 11) Fix permission checks in sysctls to use current_euid() instead of current_uid(). From Eric W Biederman. 12) IPSEC policies can go away while a timer is still pending for them, add appropriate ref-counting to fix, from Steffen Klassert. 13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth chips, from Nguyen Hong Ky and Simon Horman. 14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai. 15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama Ghorbel. 16) Fix typo in fq_change(), we were assigning "initial quantum" to "quantum". From Eric Dumazet. 17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise FQ packet scheduler does not pace those flows properly. Also from Eric Dumazet. 18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland. 19) l2tp_xmit_skb() can be called from process context, not just softirq context, so we must always make sure to BH disable around it. From Eric Dumazet. 20) On qdisc reset, we forget to purge the RB tree of SKBs in netem packet scheduler. From Stephen Hemminger. 21) Fix info leak in farsync WAN driver ioctl() handler, from Dan Carpenter and Salva Peiró. 22) Fix PHY reset and other issues in dm9000 driver, from Nikita Kiryanov and Michael Abbott. 23) When hardware can do SCTP crc32 checksums, we accidently don't disable the csum offload when IPSEC transformations have been applied. From Fan Du and Vlad Yasevich. 24) Tail loss probing in TCP leaves the socket in the wrong congestion avoidance state. From Yuchung Cheng. 25) In CPSW driver, enable NAPI before interrupts are turned on, from Markus Pargmann. 26) Integer underflow and dual-assignment in YAM hamradio driver, from Dan Carpenter. 27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must unclone it. This fixes various hard to track down crashes in drivers where the SKBs ->gso_segs was changing right from underneath the driver during TX queueing. From Eric Dumazet. 28) Fix the handling of VLAN IDs, and in particular the special IDs 0 and 4095, in the bridging layer. From Toshiaki Makita. 29) Another info leak, this time in wanxl WAN driver, from Salva Peiró. 30) Fix race in socket credential passing, from Daniel Borkmann. 31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly, from Seif Mazareeb. 32) Fix identification of fragmented frames in ipv4/ipv6 UDP Fragmentation Offload output paths, from Jiri Pirko. 33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel Elior. 34) When we removed the explicit neighbour pointer from ipv6 routes a slight regression was introduced for users such as IPVS, xt_TEE, and raw sockets. We mix up the users requested destination address with the routes assigned nexthop/gateway. From Julian Anastasov and Simon Horman. 35) Fix stack overruns in rt6_probe(), the issue is that can end up doing two full packet xmit paths at the same time when emitting neighbour discovery messages. From Hannes Frederic Sowa. 36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from Mariusz Ceier. 37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT sample, from Neal Cardwell. 38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from Steffen Klassert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter ax88179_178a: Correct the RX error definition in RX header Revert "bridge: only expire the mdb entry when query is received" tcp: initialize passive-side sk_pacing_rate after 3WHS davinci_emac.c: Fix IFF_ALLMULTI setup mac802154: correct a typo in ieee802154_alloc_device() prototype ipv6: probe routes asynchronous in rt6_probe netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper ipv6: fill rt6i_gateway with nexthop address ipv6: always prefer rt6i_gateway if present bnx2x: Set NETIF_F_HIGHDMA unconditionally bnx2x: Don't pretend during register dump bnx2x: Lock DMAE when used by statistic flow bnx2x: Prevent null pointer dereference on error flow bnx2x: Fix config when SR-IOV and iSCSI are enabled bnx2x: Fix Coalescing configuration bnx2x: Unlock VF-PF channel on MAC/VLAN config error bnx2x: Prevent an illegal pointer dereference during panic bnx2x: Fix Maximum CoS estimation for VFs drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing ...

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

2013-10-16T00:14:13Z

Pull device tree fixes and reverts from Grant Likely: "One bug fix and three reverts. The reverts back out the slightly controversial feeding the entire device tree into the random pool and the reserved-memory binding which isn't fully baked yet. Expect the reserved-memory patches at least to resurface for v3.13. The bug fixes removes a scary but harmless warning on SPARC that was introduced in the v3.12 merge window. v3.13 will contain a proper fix that makes the new code work on SPARC. On the plus side, the diffstat looks *awesome*. I love removing lines of code" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: Revert "drivers: of: add initialization code for dma reserved memory" Revert "ARM: init: add support for reserved memory defined by device tree" Revert "of: Feed entire flattened device tree into the random pool" of: fix unnecessary warning on missing /cpus node

Revert "drivers: of: add initialization code for dma reserved memory"

2013-10-15T08:26:07Z

This reverts commit 9d8eab7af79cb4ce2de5de39f82c455b1f796963. There is still no consensus on the bindings for the reserved memory and various drawbacks of the proposed solution has been shown, so the best now is to revert it completely and start again from scratch later. Signed-off-by: Marek Szyprowski Signed-off-by: Grant Likely

Merge tag 'pm+acpi-3.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2013-10-14T16:31:08Z

Pull ACPI and power management fixes from Rafael Wysocki: "These fix two recent bugs in ACPIPHP (ACPI-based PCI hotplug) and update a bunch of web links and e-mail addresses in MAINTAINERS, docs and Kconfig that either are stale or will expire soon. Specifics: - The WARN_ON() in acpiphp_enumerate_slots() triggers as a false positive in some cases, so drop it. - Add a missing pci_dev_put() to an error code path in acpiphp_enumerate_slots(). - Replace my old e-mail address that's going to expire with a new one. - Update ACPI web links and git tree information in MAINTAINERS. - Update links to the Linux-ACPI project's page in MAINTAINERS. - Update some stale links and e-mail addresses under Documentation and in the ACPI Kconfig file" * tag 'pm+acpi-3.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / hotplug / PCI: Drop WARN_ON() from acpiphp_enumerate_slots() ACPI / hotplug / PCI: Fix error code path in acpiphp_enumerate_slots() ACPI / PM / Documentation: Replace outdated project links and addresses MAINTAINERS / ACPI: Update links to the Linux-ACPI project web page MAINTAINERS / ACPI: Update links and git tree information MAINTAINERS / Documentation: Update Rafael's e-mail address

Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2013-10-12T18:53:43Z

Pull sound fixes from Takashi Iwai: "All stable fixes except for a trivial headset mic fixup: the removal of bogus frame checks in snd-usb-usx2y driver that have regressed in the recent kernel versions, the HD-audio HDMI channel map fix, and a few HD-audio device-specific fixes" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack ALSA: hda - Add a headset mic model for ALC269 and friends ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model) ALSA: hda - Add fixup for ASUS N56VZ ALSA: hda - hdmi: Fix channel map switch not taking effect ALSA: hda - Fix mono speakers and headset mic on Dell Vostro 5470 ALSA: snd-usb-usx2y: remove bogus frame checks

ACPI / PM / Documentation: Replace outdated project links and addresses

2013-10-11T11:22:43Z

Some links to projects web pages and e-mail addresses in ACPI/PM documentation and Kconfig are outdated, so update them. Signed-off-by: Rafael J. Wysocki

ALSA: hda - Add a headset mic model for ALC269 and friends

2013-10-11T08:23:49Z

Using the headset mic model will cause the headset mic to be labeled "headset mic" instead of just "mic". Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai

MAINTAINERS / Documentation: Update Rafael's e-mail address

2013-10-08T23:47:53Z

The e-mail address rjw@sisk.pl that I have been using for quite some time is going to expire at one point, so replace it with a new one, rjw@rjwysocki.net, everywhere in MAINTAINERS and Documentation/ABI. Signed-off-by: Rafael J. Wysocki

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-10-03T04:48:32Z

Pull ARM SoC fixes from Olof Johansson: "We have a fairly large batch of fixes this time around, mostly just due to various platforms all having a fix or two more than usual. Worth pointing out are: - A fix for EDMA on Davinci/OMAP where channel allocation broke with the DT conversion. Due to some miscommunication we didn't understand the impact of the breakage, so we were pushing back on it for 3.12, but it sounds like it's actually breaking quite a few people out there. - A bunch of fixes for Marvell platforms, some straggling fixes for merge window fallout and some fixes for a couple of the platforms (Netgear RN102 in particular). - A fix for a race between multi-cluster power management and cpu hotplug on Versatile Express. And a bunch of other smaller fixes that all add up. We'll be switching over into stricter regressions-only mode from here on out" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: multi_v7_defconfig: add SDHCI for i.MX bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102 ARM: at91: sam9g45: shutdown ddr1 too when rebooting MAINTAINERS: ARM: SIRF: use kernel.org mail box MAINTAINERS: ARM: SIRF: add missed drivers into maintain list ARM: edma: Fix clearing of unused list for DT DMA resources ARM: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down ARM: dts: sirf: fix interrupt and dma prop of VIP for prima2 and atlas6 ARM: dts: sirf: fix the ranges of peri-iobrg of prima2 ARM: dts: makefile: build atlas6-evb.dtb for ARCH_ATLAS6 ARM: dts: sirf: fix fifosize, clks, dma channels for UART ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high ARM: mach-integrator: Add stub for pci_v3_early_init() for !CONFIG_PCI ARM: shmobile: Remove #gpio-ranges-cells DT property gpio: rcar: Remove #gpio-range-cells DT property usage ARM: shmobile: armadillo: fixup ether pinctrl naming ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup ARM: shmobile: update SDHI DT compatibility string to the - format ...

connector - documentation: simplify netlink message length assignment

2013-10-02T20:03:51Z

Use the precalculated size instead of obfuscating the message length calculation by first subtracting the netlink header length from size and then use the NLMSG_LENGTH() macro to add it back again. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller