linux/Documentation, branch v4.0

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

2015-04-12T17:43:30Z

Pull last minute thermal-SoC management fixes from Eduardo Valentin: "Specifics: - Minor fixes on ST and RCAR thermal drivers. - Avoid flooding kernel log when driver returns -EAGAIN. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: drivers: thermal: st: remove several sparse warnings thermal: constify of_device_id array thermal: Do not log an error if thermal_zone_get_temp returns -EAGAIN thermal: rcar: Fix typo in r8a73a4 SoC name

thermal: rcar: Fix typo in r8a73a4 SoC name

2015-04-07T19:53:34Z

r8a73a4 is R-Mobile APE6, not AP6. Signed-off-by: Geert Uytterhoeven Signed-off-by: Eduardo Valentin

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-04-06T22:19:59Z

Pull networking fixes from David Miller: 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was previously SACK'd, from Neal Cardwell. 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup, from Cong WANG. 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also from Cong WANG. 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel. 5) When we encapsulate for a tunnel device, skb->sk still points to the user socket. So this leads to cases where we retraverse the ipv4/ipv6 output path with skb->sk being of some other address family (f.e. AF_PACKET). This can cause things to crash since the ipv4 output path is dereferencing an AF_PACKET socket as if it were an ipv4 one. The short term fix for 'net' and -stable is to elide these socket checks once we've entered an encapsulation sequence by testing xmit_recursion. Longer term we have a better solution wherein we pass the tunnel's socket down through the output paths, but that is way too invasive for 'net' and -stable. From Hannes Frederic Sowa. 6) l2tp_init() failure path forgets to unregister per-net ops, from Cong WANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/mlx4_core: Fix error message deprecation for ConnectX-2 cards net: dsa: fix filling routing table from OF description l2tp: unregister l2tp_net_ops on failure path mvneta: dont call mvneta_adjust_link() manually ipv6: protect skb->sk accesses from recursive dereference inside the stack netns: don't allocate an id for dead netns Revert "netns: don't clear nsid too early on removal" ip6mr: call del_timer_sync() in ip6mr_free_table() net: move fib_rules_unregister() under rtnl lock ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup tcp: fix FRTO undo on cumulative ACK of SACKed range xen-netfront: transmit fully GSO-sized packets

net: dsa: fix filling routing table from OF description

2015-04-06T21:31:37Z

According to description in 'include/net/dsa.h', in cascade switches configurations where there are more than one interconnected devices, 'rtable' array in 'dsa_chip_data' structure is used to indicate which port on this switch should be used to send packets to that are destined for corresponding switch. However, dsa_of_setup_routing_table() fills 'rtable' with port numbers of the _target_ switch, but not current one. This commit removes redundant devicetree parsing and adds needed port number as a function argument. So dsa_of_setup_routing_table() now just looks for target switch number by parsing parent of 'link' device node. To remove possible misunderstandings with the way of determining target switch number, a corresponding comment was added to the source code and to the DSA device tree bindings documentation file. This was tested on a custom board with two Marvell 88E6095 switches with following corresponding routing tables: { -1, 10 } and { 8, -1 }. Signed-off-by: Pavel Nakonechny Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-04-06T21:10:08Z

Pull input fixes from Dmitry Torokhov: "Updates for the input subsystem - two more tweaks for ALPS driver to work out kinks after splitting the touchpad, trackstick, and potential external PS/2 mouse into separate input devices. Changes to support ALPS SS4 devices (protocol V8) will be coming in 4.1..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - document stick behavior for protocol V2 Input: alps - report V2 Dualpoint Stick events via the right evdev node Input: alps - report interleaved bare PS/2 packets via dev3

Input: alps - document stick behavior for protocol V2

2015-04-05T18:48:35Z

Document that protocol V2 uses standard (bare) PS/2 mouse packets for the DualPoint stick. Signed-off-by: Hans de Goede Acked-By: Pali Rohár Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-04-03T21:58:48Z

Pull input subsystem fixes from Dmitry Torokhov: "A fix for ALPS driver for issue introduced in the latest update and a tweak for yet another Lenovo box in Synaptics. There will be more ALPS tweaks coming.." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: define INPUT_PROP_ACCELEROMETER behavior Input: synaptics - fix min-max quirk value for E440 Input: synaptics - add quirk for Thinkpad E440 Input: ALPS - fix max coordinates for v5 and v7 protocols Input: add MT_TOOL_PALM

Input: define INPUT_PROP_ACCELEROMETER behavior

2015-03-31T21:46:40Z

Spell out what this property means to userspace. If the property is set, all directional axes must be accelerometer axes, any other axes are left as-is. This allows an accelerometer device to e.g. have an ABS_WHEEL. It is not permitted to mix normal directional axes and accelerometer axes on the same device node. Signed-off-by: Peter Hutterer Acked-by: Jiri Kosina Reviewed-by: Bastien Nocera Signed-off-by: Dmitry Torokhov

Input: add MT_TOOL_PALM

2015-03-20T16:45:28Z

Currently there are only two "tools" that can be specified by a multi-touch driver: MT_TOOL_FINGER and MT_TOOL_PEN. In working with Elan (The touch vendor) and discussing their next-gen devices it seems that it will be useful to have more tools so that their devices can give the upper layers of the stack hints as to what is touching the sensor. In particular they have new experimental firmware that can better differentiate between palms vs fingertips and would like to plumb a patch so that we can use their hints in higher-level gesture soft- ware. The firmware on the device can reasonably do a better job of palm detection because it has access to all of the raw sensor readings as opposed to just the width/pressure/etc that are exposed by the driver. As such, the firmware can characterize what a palm looks like in much finer-grained detail and this change would allow such a device to share its findings with the kernel. Signed-off-by: Charlie Mooney Acked-by: Peter Hutterer Signed-off-by: Dmitry Torokhov

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-03-15T17:49:38Z

Pull ARM SoC fixes from Arnd Bergmann: "This is a rather unpleasantly large set of bug fixes for arm-soc, Most of them because of cross-tree dependencies for Exynos where we should have figured out the right path to merge things before the merge window, and then the maintainer being unable to sort things out in time during a business trip. The other changes contained here are the usual collection: MAINTAINERS file updates - Gregory Clement is now a co-maintainer for the legacy Marvell EBU platforms - A MAINTAINERS entry for the Freescale Vybrid platform that was added last year - Matt Porter no longer works as a maintainer on Broadcom SoCs Build-time issues - A compile-time error for at91 - Several minor DT fixes on at91, imx, exynos, socfpga, and omap - The new digicolor platform was not correctly enabled at all Configuration issues - Two defconfig fix for regressions using USB on versatile express and on OMAP3 - Enabling all 8 CPUs on Allwinner/SUNxi - Enabling the new STiH410 platform to be usable Bug fixes in platform code - A missing barrier for socfpga - Fixing LPDDR1 self-refresh mode on at91 - Fixing RTC interrupt numbers on Exynos3250 - Fixing a cache-coherency issues in CPU power-down on Exynos5 - Multiple small OMAP power management fixes" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (69 commits) MAINTAINERS: Add myself as co-maintainer to the legacy support of the mvebu SoCs ARM: at91: pm_slowclock: fix the compilation error ARM: at91/dt: fix USB high-speed clock to select UTMI ARM: at91/dt: fix at91 udc compatible strings ARM: at91/dt: declare matrix node as a syscon device ARM: vexpress: update CONFIG_USB_ISP1760 option ARM: digicolor: add the machine directory to Makefile ARM: STi: Add STiH410 SoC support MAINTAINERS: add Freescale Vybrid SoC MAINTAINERS: Remove self as ARM mach-bcm co-maintainer ARM: imx6sl-evk: set swbst_reg as vbus's parent reg ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: OMAP5: fix polling intervals for thermal zones ...