Mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ https://git.shady.money/linux/atom?h=v4.8 2016-09-23T23:34:24Z 2016-09-23T23:34:24Z Linus Torvalds torvalds@linux-foundation.org 2016-09-23T23:34:24Z urn:sha1:d0c1d15f5ed7f028d2c284b7fed7e73575d9c24d Pull input updates from Dmitry Torokhov: "Just a fix up for the firmware handling to the Silead driver (which is a new driver in this release)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead_gsl1680 - use "silead/" prefix for firmware loading Input: silead_gsl1680 - document firmware-name, fix implementation 2016-09-22T16:04:49Z Linus Torvalds torvalds@linux-foundation.org 2016-09-22T16:04:49Z urn:sha1:b1f2beb87bb034bb209773807994279f90cace78 Pull media fixes from Mauro Carvalho Chehab: - several fixes for new drivers added for Kernel 4.8 addition (cec core, pulse8 cec driver and Mediatek vcodec) - a regression fix for cx23885 and saa7134 drivers - an important fix for rcar-fcp, making rcar_fcp_enable() return 0 on success * tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (25 commits) [media] cx23885/saa7134: assign q->dev to the PCI device [media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success [media] cec: fix ioctl return code when not registered [media] cec: don't Feature Abort broadcast msgs when unregistered [media] vcodec:mediatek: Refine VP8 encoder driver [media] vcodec:mediatek: Refine H264 encoder driver [media] vcodec:mediatek: change H264 profile default to profile high [media] vcodec:mediatek: Add timestamp and timecode copy for V4L2 Encoder [media] vcodec:mediatek: Fix visible_height larger than coded_height issue in s_fmt_out [media] vcodec:mediatek: Fix fops_vcodec_release flow for V4L2 Encoder [media] vcodec:mediatek:code refine for v4l2 Encoder driver [media] cec-funcs.h: add missing vendor-specific messages [media] cec-edid: check for IEEE identifier [media] pulse8-cec: fix error handling [media] pulse8-cec: set correct Signal Free Time [media] mtk-vcodec: add HAS_DMA dependency [media] cec: ignore messages when log_addr_mask == 0 [media] cec: add item to TODO [media] cec: set unclaimed addresses to CEC_LOG_ADDR_INVALID [media] cec: add CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK flag ... 2016-09-12T08:31:37Z Lee Jones lee.jones@linaro.org 2016-09-08T09:11:35Z urn:sha1:981b178964d03f6f8e6cca01568c17d1dbafdf0e The interconnect (ICN) clock is required for functional working of MMC on some ST platforms. When not supplied it can result in broken MMC and the following output: [ 13.916949] mmc0: Timeout waiting for hardware interrupt. [ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002 [ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011 [ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07 [ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 [ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000 [ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 13.992252] sdhci: Host ctl2: 0x00000000 [ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200 [ 14.001990] sdhci: =========================================== [ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 2016-09-10T17:49:12Z Hans de Goede hdegoede@redhat.com 2016-09-08T02:25:37Z urn:sha1:43ba588346455dcc984dc98a49af1c2eb1e9aa75 The driver has supported touchscreen-fw-name to specify the firmware to load since it has been merged, but this was omitted from the dt-binding documentation. During review of adding touchscreen-fw-name to the binding documentation it was brought up that there is a standard property name called "firmware-name" for this, which should be used. Since there are no users of touchscreen-fw-name yet, this commit adds documentation of "firmware-name" to the dt-binding documentation and switches the driver over to use this. This commit also makes the driver add a "silead/" prefix to the firmware name from dt before calling request_firmware. That the firmware files are stored under /lib/firmware/silead under Linux is an implementation detail and does not belong in devicetree. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2016-09-10T16:43:10Z Linus Torvalds torvalds@linux-foundation.org 2016-09-10T16:43:10Z urn:sha1:b8db3714d7479881e23de20735f60f1733723241 Pull i2c fixes from Wolfram Sang: "Mostly driver bugfixes, but also a few cleanups which are nice to have out of the way" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rk3x: Restore clock settings at resume time i2c: Spelling s/acknowedge/acknowledge/ i2c: designware: save the preset value of DW_IC_SDA_HOLD Documentation: i2c: slave-interface: add note for driver development i2c: mux: demux-pinctrl: run properly with multiple instances i2c: bcm-kona: fix inconsistent indenting i2c: rcar: use proper device with dma_mapping_error i2c: sh_mobile: use proper device with dma_mapping_error i2c: mux: demux-pinctrl: invalidate properly when switching fails 2016-09-09T21:47:41Z Linus Torvalds torvalds@linux-foundation.org 2016-09-09T21:47:41Z urn:sha1:daf6b9b68fca57effe3fcf74a8528f17516c420f Pull power management fixes from Rafael Wysocki: "This includes a PM QoS framework fix from Tejun to prevent interrupts from being enabled unexpectedly during early boot and a cpufreq documentation fix. Specifics: - If the PM QoS framework invokes cancel_delayed_work_sync() during early boot, it will enable interrupts which is not expected at that point, so prevent it from happening (Tejun Heo) - Fix cpufreq statistic documentation to follow a recent change in behavior that forgot to update it as appropriate (Jean Delvare)" * tag 'pm-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq-stats: Minor documentation fix PM / QoS: avoid calling cancel_delayed_work_sync() during early boot 2016-09-08T21:05:07Z Jean Delvare jdelvare@suse.de 2016-09-08T21:05:07Z urn:sha1:3732b30a7d88dc32bef76e117067fb397e811703 The cpufreq-stats code can no longer be built as a module, so it now appears with square brackets in menuconfig. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 1aefc75b2449 (cpufreq: stats: Make the stats code non-modular) Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2016-09-08T19:05:15Z Linus Torvalds torvalds@linux-foundation.org 2016-09-08T19:05:15Z urn:sha1:e8b3b45de89117729cdc1a6b29da85500e4af7db Pull ARM SoC fixes from Olof Johansson: "This is a slightly larger batch of fixes that we've been sitting on a few -rcs. Most of them are simple oneliners, but there are two sets that are slightly larger and worth pointing out: - A set of patches to OMAP to deal with hwmod for RTC on am33xx (beaglebone SoC, among others). It's the only clock that ever has a valid offset of 0, so a new flag needed introduction once this problem was discovered. - A collection of CCI fixes for performance counters discovered once people started using it on X-Gene CPUs" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) arm-cci: pmu: Fix typo in event name Revert "ARM: tegra: fix erroneous address in dts" ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name ARM: dts: kirkwood: Fix PCIe label on OpenRD ARM: kirkwood: ib62x0: fix size of u-boot environment partition bus: arm-ccn: make event groups reliable bus: arm-ccn: fix hrtimer registration bus: arm-ccn: fix PMU interrupt flags ARM: tegra: Correct polarity for Tegra114 PMIC interrupt MAINTAINERS: add tree entry for ARM/UniPhier architecture ARM: sun5i: Fix typo in trip point temperature MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski ARM: imx6ul: populates platform device at .init_machine bus: arm-ccn: Add missing event attribute exclusions for host/guest bus: arm-ccn: Correct required arguments for XP PMU events bus: arm-ccn: Fix XP watchpoint settings bitmask bus: arm-ccn: Do not attempt to configure XPs for cycle counter bus: arm-ccn: Fix PMU handling of MN ... 2016-09-08T14:57:14Z Wolfram Sang wsa@the-dreams.de 2016-08-25T17:27:40Z urn:sha1:30851a7c2155d0b321485e66386ea99191d8b3f5 Make it clear that adding slave support shall not disable master functionality. We can have both, so we should. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 2016-09-03T18:36:55Z Linus Torvalds torvalds@linux-foundation.org 2016-09-03T18:36:55Z urn:sha1:41488202f1afac2e7425cc4d4a3b4208c3e2cc8c Pull driver core fixes from Greg KH: "Here are three small fixes for 4.8-rc5. One for sysfs, one for kernfs, and one documentation fix, all for reported issues. All of these have been in linux-next for a while" * tag 'driver-core-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: correctly handle read offset on PREALLOC attrs documentation: drivers/core/of: fix name of of_node symlink kernfs: don't depend on d_find_any_alias() when generating notifications