linux/arch/arm, branch v4.7

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-07-23T03:32:50Z

Pull ARM SoC fixes from Olof Johansson: "A handful of fixes before final release: Marvell Armada: - One to fix a typo in the devicetree specifying memory ranges for the crypto engine - Two to deal with marking PCI and device-memory as strongly ordered to avoid hardware deadlocks, in particular when enabling above crypto driver. - Compile fix for PM Allwinner: - DT clock fixes to deal with u-boot-enabled framebuffer (simplefb). - Make R8 (C.H.I.P. SoC) inherit system compatibility from A13 to make clocks register proper. Tegra: - Fix SD card voltage setting on the Tegra3 Beaver dev board Misc: - Two maintainers updates for STM32 and STi platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: beaver: Allow SD card voltage to be changed MAINTAINERS: update STi maintainer list MAINTAINERS: update STM32 maintainers list ARM: mvebu: compile pm code conditionally ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys ARM: mvebu: map PCI I/O regions strongly ordered ARM: mvebu: fix HW I/O coherency related deadlocks ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13

ARM: tegra: beaver: Allow SD card voltage to be changed

2016-07-07T05:21:40Z

This allows to switch the card signal voltage level to 1.8 V, which is needed for any ultra high speed modes to work. Signed-off-by: Lucas Stach Acked-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Olof Johansson

Merge tag 'mvebu-fixes-4.7-2' of git://git.infradead.org/linux-mvebu into fixes

2016-07-05T13:56:33Z

Pull "mvebu fixes for 4.7 (part 2)" from Gregory CLEMENT: Fix a regression introduced by a cleanup on kirkwood_pm_init * tag 'mvebu-fixes-4.7-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: compile pm code conditionally

Merge tag 'sunxi-fixes-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes

2016-07-05T13:55:12Z

Pull "Allwinner Fixes for 4.7" from Maxime Ripard: Two patches fixing simplefb on the SoCs that had their display clocks enabled, and one fix for the CHIP that will enable its sched clock. * tag 'sunxi-fixes-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13

Merge tag 'kvm-arm-for-v4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

2016-06-30T15:11:20Z

KVM/ARM Fixes for v4.7-rc6: Fixes a build issue without CONFIG_ARM_PMU and plugs pid leak on arm/arm64.

ARM: mvebu: compile pm code conditionally

2016-06-30T11:47:52Z

A cleanup to include the headers correctly caused another build problem: arch/arm/mach-mvebu/kirkwood-pm.c:70:13: error: redefinition of 'kirkwood_pm_init' arch/arm/mach-mvebu/kirkwood-pm.h:23:20: note: previous definition of 'kirkwood_pm_init' was here The underlying issue is that kirkwood-pm.o is not actually meant to be used when CONFIG_PM is disabled, so we should also leave it out of the Makefile. The same seems to be true for the PM code in MACH_MVEBU_V7, and I'm treating it the same way here. Signed-off-by: Arnd Bergmann Fixes: d705c1a66e15 ("ARM: Kirkwood: fix kirkwood_pm_init() declaration/type") Signed-off-by: Gregory CLEMENT

ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock

2016-06-29T07:03:13Z

Fix pll3x2 and pll7x2 not having a parent clock, specifically this fixes the kernel turning of pll3 while simplefb is using it when uboot has configured things to use pll3x2 as lcd ch clk parent. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard

KVM: arm/arm64: Stop leaking vcpu pid references

2016-06-27T11:08:10Z

kvm provides kvm_vcpu_uninit(), which amongst other things, releases the last reference to the struct pid of the task that was last running the vcpu. On arm64 built with CONFIG_DEBUG_KMEMLEAK, starting a guest with kvmtool, then killing it with SIGKILL results (after some considerable time) in: > cat /sys/kernel/debug/kmemleak > unreferenced object 0xffff80007d5ea080 (size 128): > comm "lkvm", pid 2025, jiffies 4294942645 (age 1107.776s) > hex dump (first 32 bytes): > 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > backtrace: > [] create_object+0xfc/0x278 > [] kmemleak_alloc+0x34/0x70 > [] kmem_cache_alloc+0x16c/0x1d8 > [] alloc_pid+0x34/0x4d0 > [] copy_process.isra.6+0x79c/0x1338 > [] _do_fork+0x74/0x320 > [] SyS_clone+0x18/0x20 > [] el0_svc_naked+0x24/0x28 > [] 0xffffffffffffffff On x86 kvm_vcpu_uninit() is called on the path from kvm_arch_destroy_vm(), on arm no equivalent call is made. Add the call to kvm_arch_vcpu_free(). Signed-off-by: James Morse Fixes: 749cf76c5a36 ("KVM: ARM: Initial skeleton to compile KVM support") Cc: # 3.10+ Acked-by: Marc Zyngier Signed-off-by: Christoffer Dall

Merge tag 'mvebu-fixes-4.7-1' of git://git.infradead.org/linux-mvebu into fixes

2016-06-26T04:19:37Z

mvebu fixes for 4.7 (part 1) Various I/O memory fix for Cortex A9 based SoCs * tag 'mvebu-fixes-4.7-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys ARM: mvebu: map PCI I/O regions strongly ordered ARM: mvebu: fix HW I/O coherency related deadlocks Signed-off-by: Olof Johansson

tree wide: get rid of __GFP_REPEAT for order-0 allocations part I

2016-06-25T00:23:52Z

This is the third version of the patchset previously sent [1]. I have basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get rid of superfluous gfp flags" which went through dm tree. I am sending it now because it is tree wide and chances for conflicts are reduced considerably when we want to target rc2. I plan to send the next step and rename the flag and move to a better semantic later during this release cycle so we will have a new semantic ready for 4.8 merge window hopefully. Motivation: While working on something unrelated I've checked the current usage of __GFP_REPEAT in the tree. It seems that a majority of the usage is and always has been bogus because __GFP_REPEAT has always been about costly high order allocations while we are using it for order-0 or very small orders very often. It seems that a big pile of them is just a copy&paste when a code has been adopted from one arch to another. I think it makes some sense to get rid of them because they are just making the semantic more unclear. Please note that GFP_REPEAT is documented as * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt * _might_ fail. This depends upon the particular VM implementation. while !costly requests have basically nofail semantic. So one could reasonably expect that order-0 request with __GFP_REPEAT will not loop for ever. This is not implemented right now though. I would like to move on with __GFP_REPEAT and define a better semantic for it. $ git grep __GFP_REPEAT origin/master | wc -l 111 $ git grep __GFP_REPEAT | wc -l 36 So we are down to the third after this patch series. The remaining places really seem to be relying on __GFP_REPEAT due to large allocation requests. This still needs some double checking which I will do later after all the simple ones are sorted out. I am touching a lot of arch specific code here and I hope I got it right but as a matter of fact I even didn't compile test for some archs as I do not have cross compiler for them. Patches should be quite trivial to review for stupid compile mistakes though. The tricky parts are usually hidden by macro definitions and thats where I would appreciate help from arch maintainers. [1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org This patch (of 19): __GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. Yet we have the full kernel tree with its usage for apparently order-0 allocations. This is really confusing because __GFP_REPEAT is explicitly documented to allow allocation failures which is a weaker semantic than the current order-0 has (basically nofail). Let's simply drop __GFP_REPEAT from those places. This would allow to identify place which really need allocator to retry harder and formulate a more specific semantic for what the flag is supposed to do actually. Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko Cc: "David S. Miller" Cc: "H. Peter Anvin" Cc: "James E.J. Bottomley" Cc: "Theodore Ts'o" Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Chen Liqin Cc: Chris Metcalf [for tile] Cc: Guan Xuetao Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Jan Kara Cc: John Crispin Cc: Lennox Wu Cc: Ley Foon Tan Cc: Martin Schwidefsky Cc: Matt Fleming Cc: Ralf Baechle Cc: Rich Felker Cc: Russell King Cc: Thomas Gleixner Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds