linux/arch/ia64/sn/kernel/bte.c, branch master

ia64: remove support for the SGI SN2 platform

2019-08-16T18:33:57Z

The SGI SN2 (early Altix) is a very non-standard IA64 platform that was at the very high end of even IA64 hardware, and has been discontinued a long time ago. Remove it because there no upstream users left, and it has magic hooks all over the kernel. Signed-off-by: Christoph Hellwig Link: https://lkml.kernel.org/r/20190813072514.23299-16-hch@lst.de Signed-off-by: Tony Luck

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16Z

Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include @@ @@ - #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ia64: Convert timers to use timer_setup()

2017-11-02T22:50:33Z

In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. One less trivial change was removing the repeated casting for callers of bte_error_handler() by fixing its function declaration and adding a small wrapper for the timer callback instead. Cc: Tony Luck Cc: Fenghua Yu Cc: Ingo Molnar Cc: Joe Perches Cc: Andrew Morton Cc: Thomas Gleixner Cc: Sebastian Andrzej Siewior Cc: linux-ia64@vger.kernel.org Signed-off-by: Kees Cook

[IA64] sn: Do not needlessly convert between pointers and integers

2014-07-29T23:28:15Z

The nasid_to_try variable is an array of integers, so plain integers can be used when assigning values to the elements rather than casting a NULL pointer to an integer, which results in the following warning from GCC: arch/ia64/sn/kernel/bte.c:117:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] nasid_to_try[1] = (int)NULL; ^ arch/ia64/sn/kernel/bte.c:125:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] nasid_to_try[1] = (int)NULL; ^ Replace (int)NULL with a simple 0 to silence these warnings. Signed-off-by: Thierry Reding Signed-off-by: Tony Luck

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

[IA64] bte_copy of BTE_MAX_XFER trips BUG_ON.

2009-02-19T19:29:31Z

BTE_MAX_XFER is wrong. It is one greater than the number of cache lines the BTE is actually able to transfer. If you request a transfer of exactly BTE_MAX_XFER size, you trip a very cryptic BUG_ON() which should certainly be made more clear. This patch fixes that constant and also cleans up the BUG_ON()s in arch/ia64/sn/kernel/bte.c to test one condition per line. Signed-off-by: Robin Holt Signed-off-by: Tony Luck

[IA64] Fix Altix BTE error return status

2007-12-19T19:19:19Z

The Altix shub2 BTE error detail bits are in a different location than on shub1. The current code does not take this into account resulting in all shub2 BTE failures mapping to "unknown". This patch reads the error detail bits from the proper location, so the correct BTE failure reason is returned for both shub1 and shub2. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck

[IA64] spelling fixes: arch/ia64/

2007-05-11T21:55:43Z

Spelling and apostrophe fixes in arch/ia64/. Signed-off-by: Simon Arlott Signed-off-by: Tony Luck

[IA64] bte_unaligned_copy() transfers one extra cache line.

2006-11-15T18:12:15Z

When called to do a transfer that has a start offset within the cache line which is uneven between source and destination and a length which terminates the source of the copy exactly on a cache line, one extra line gets copied into a temporary buffer. This is normally not an issue since the buffer is a kernel buffer and only the requested information gets copied into the user buffer. The problem arises when the source ends at the very last physical page of memory. That last cache line does not exist and results in the SHUB chip raising an MCA. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Signed-off-by: Tony Luck

[IA64-SGI] Do not request DMA memory for BTE

2006-09-26T20:56:39Z

The GFP_DMA option usually does nothing on SN2 since all of memory is in thei DMA zone and the BTE has always been capable of addressing all of memory. So there is no need to get memory from a restricted range of memory (which is what GFP_DMA is for). Remove useless __GFP_DMA option. Signed-off-by: Christoph Lameter Signed-off-by: Tony Luck