linux/arch/openrisc/kernel, branch master

kbuild: Split .modinfo out from ELF_DETAILS

2026-02-26T18:50:19Z

Commit 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and ELF_DETAILS was present in all architecture specific vmlinux linker scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and COMMON_DISCARDS may be used by other linker scripts, such as the s390 and x86 compressed boot images, which may not expect to have a .modinfo section. In certain circumstances, this could result in a bootloader failing to load the compressed kernel [1]. Commit ddc6cbef3ef1 ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with SecureBoot trailer") recently addressed this for the s390 bzImage but the same bug remains for arm, parisc, and x86. The presence of .modinfo in the x86 bzImage was the root cause of the issue worked around with commit d50f21091358 ("kbuild: align modinfo section for Secureboot Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition. Split .modinfo out from ELF_DETAILS into its own macro and handle it in all vmlinux linker scripts. Discard .modinfo in the places where it was previously being discarded from being in COMMON_DISCARDS, as it has never been necessary in those uses. Cc: stable@vger.kernel.org Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped") Reported-by: Ed W Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1] Tested-by: Ed W # x86_64 Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org Signed-off-by: Nathan Chancellor

openrisc: Fix IPIs on simple multicore systems

2026-01-16T16:38:56Z

Commit c05671846451 ("openrisc: sleep instead of spin on secondary wait") fixed OpenRISC SMP Linux for QEMU. However, stability was never achieved on FPGA development boards. This is because the above patch has a step to unmask IPIs on non-boot cpu's but on hardware without power management, IPIs remain masked. This meant that IPI's were never actually working on the simple SMP systems we run on development boards. The systems booted but stability was very suspect. Add the ability to unmask IPI's on the non-boot cores. This is done by making the OMPIC IRQs proper percpu IRQs. We can then use the enabled_percpu_irq() to unmask IRQ on the non-boot cpus. Update the or1k PIC driver to use a flow handler that can switch between percpu and the configured level or edge flow handlers at runtime. This mechanism is inspired by that done in the J-Core AIC driver. Signed-off-by: Stafford Horne Acked-by: Thomas Gleixner

Merge tag 'for-linus' of https://github.com/openrisc/linux

2025-10-05T17:02:54Z

Pull OpenRISC updates from Stafford Horne: "I picked up one series from Chen Miao, our Google Summer of Code contributor, which adds OpenRISC support for static keys" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Add jump label support openrisc: Regenerate defconfigs. openrisc: Add R_OR1K_32_PCREL relocation type module support openrisc: Add text patching API support

Merge tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-09-30T17:35:11Z

Pull scheduler updates from Ingo Molnar: "Core scheduler changes: - Make migrate_{en,dis}able() inline, to improve performance (Menglong Dong) - Move STDL_INIT() functions out-of-line (Peter Zijlstra) - Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra) Fair scheduling: - Defer throttling to when tasks exit to user-space, to reduce the chance & impact of throttle-preemption with held locks and other resources (Aaron Lu, Valentin Schneider) - Get rid of sched_domains_curr_level hack for tl->cpumask(), as the warning was getting triggered on certain topologies (Peter Zijlstra) Misc cleanups & fixes: - Header cleanups (Menglong Dong) - Fix race in push_dl_task() (Harshit Agarwal)" * tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix some typos in include/linux/preempt.h sched: Make migrate_{en,dis}able() inline rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c sched/fair: Do not balance task to a throttled cfs_rq sched/fair: Do not special case tasks in throttled hierarchy sched/fair: update_cfs_group() for throttled cfs_rqs sched/fair: Propagate load for throttled cfs_rq sched/fair: Get rid of throttled_lb_pair() sched/fair: Task based throttle time accounting sched/fair: Switch to task based throttle model sched/fair: Implement throttle task work and related helpers sched/fair: Add related data structure for task based throttle sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig sched: Move STDL_INIT() functions out-of-line sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask() sched/deadline: Fix race in push_dl_task()

arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c

2025-09-25T07:57:15Z

The include/generated/asm-offsets.h is generated in Kbuild during compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to generate another similar offset header file, circular dependency can happen. For example, we want to generate a offset file include/generated/test.h, which is included in include/sched/sched.h. If we generate asm-offsets.h first, it will fail, as include/sched/sched.h is included in asm-offsets.c and include/generated/test.h doesn't exist; If we generate test.h first, it can't success neither, as include/generated/asm-offsets.h is included by it. In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular dependency. We can generate asm-offsets.h first, and if the COMPILE_OFFSETS is defined, we don't include the "generated/test.h". And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this purpose. Signed-off-by: Menglong Dong Signed-off-by: Peter Zijlstra (Intel)

openrisc: Add jump label support

2025-09-11T10:27:59Z

Supported a complete jump_label implementation based on the ARM64 and RV64 version and add the CONFIG_JUMP_LABEL=y to the defconfig. Testing was conducted using a dedicated test module jump-label-test, provided in the link below. For detailed steps, please refer to the README also at the provided link. Link: https://github.com/ChenMiaoi/GSoC-2025-Final-Report/tree/main/tests/jump-label-test Test Environment: - Hardware: QEMU emulated OR1K - Kernel Version: 6.17.0-rc3-dirty - Configs: CONFIG_MODULES=y,CONFIG_MODULE_UNLOAD=y - Toolchain: or1k-none-linux-musl-gcc 15.1.0 Test Results: $ insmod jump_label_test.ko [ 32.590000] Jump label performance test module loaded [ 35.250000] Normal branch time: 1241327150 ns (124 ns per iteration) [ 35.250000] Jump label (false) time: 706422700 ns (70 ns per iteration) [ 35.250000] Jump label (true) time: 708913450 ns (70 ns per iteration) $ rmmod jump_label_test.ko [ 72.210000] Jump label test module unloaded The results show approximately 43% improvement in branch performance when using jump labels compared to traditional branches. Link: https://lore.kernel.org/openrisc/aLsZ9S3X0OpKy1RM@antec/T/#u Signed-off-by: chenmiao Signed-off-by: Stafford Horne

openrisc: Add R_OR1K_32_PCREL relocation type module support

2025-09-11T10:27:59Z

To ensure the proper functioning of the jump_label test module, this patch adds support for the R_OR1K_32_PCREL relocation type for any modules. The implementation calculates the PC-relative offset by subtracting the instruction location from the target value and stores the result at the specified location. Signed-off-by: chenmiao Signed-off-by: Stafford Horne

openrisc: Add text patching API support

2025-09-11T10:27:59Z

Add text patching api's to use in subsequent jump_label implementation. We use a new fixmap FIX_TEXT_POKE0 entry to temporarily override MMU mappings to allow read only text pages to be written to. Previously, __set_fix was marked with __init as it was only used during the EARLYCON stage. Now that TEXT_POKE mappings require post-init usage (e.g., FIX_TEXT_POKE0), keeping __init would cause runtime bugs whenset_fixmap accesses invalid memory. Thus, we remove the __init flag to ensure __set_fix remains valid beyond initialization. A new function patch_insn_write is exposed to allow single instruction patching. Link: https://lore.kernel.org/openrisc/aJIC8o1WmVHol9RY@antec/T/#t Signed-off-by: chenmiao Signed-off-by: Stafford Horne

arch: copy_thread: pass clone_flags as u64

2025-09-01T13:31:34Z

With the introduction of clone3 in commit 7f192e3cd316 ("fork: add clone3") the effective bit width of clone_flags on all architectures was increased from 32-bit to 64-bit, with a new type of u64 for the flags. However, for most consumers of clone_flags the interface was not changed from the previous type of unsigned long. While this works fine as long as none of the new 64-bit flag bits (CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still undesirable in terms of the principle of least surprise. Thus, this commit fixes all relevant interfaces of the copy_thread function that is called from copy_process to consistently pass clone_flags as u64, so that no truncation to 32-bit integers occurs on 32-bit architectures. Signed-off-by: Simon Schuster Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com Fixes: c5febea0956fd387 ("fork: Pass struct kernel_clone_args into copy_thread") Acked-by: Guo Ren (Alibaba Damo Academy) Acked-by: Andreas Larsson # sparc Acked-by: David Hildenbrand Acked-by: Geert Uytterhoeven # m68k Reviewed-by: Arnd Bergmann Signed-off-by: Christian Brauner

Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-07-31T21:57:54Z

Pull MM updates from Andrew Morton: "As usual, many cleanups. The below blurbiage describes 42 patchsets. 21 of those are partially or fully cleanup work. "cleans up", "cleanup", "maintainability", "rationalizes", etc. I never knew the MM code was so dirty. "mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes) addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for merging with existing adjacent VMAs. "mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park) adds a new kernel module which simplifies the setup and usage of DAMON in production environments. "stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig) is a cleanup to the writeback code which removes a couple of pointers from struct writeback_control. "drivers/base/node.c: optimization and cleanups" (Donet Tom) contains largely uncorrelated cleanups to the NUMA node setup and management code. "mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman) does some maintenance work on the userfaultfd code. "Readahead tweaks for larger folios" (Ryan Roberts) implements some tuneups for pagecache readahead when it is reading into order>0 folios. "selftests/mm: Tweaks to the cow test" (Mark Brown) provides some cleanups and consistency improvements to the selftests code. "Optimize mremap() for large folios" (Dev Jain) does that. A 37% reduction in execution time was measured in a memset+mremap+munmap microbenchmark. "Remove zero_user()" (Matthew Wilcox) expunges zero_user() in favor of the more modern memzero_page(). "mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand) addresses some warts which David noticed in the huge page code. These were not known to be causing any issues at this time. "mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park) provides some cleanup and consolidation work in DAMON. "use vm_flags_t consistently" (Lorenzo Stoakes) uses vm_flags_t in places where we were inappropriately using other types. "mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy) increases the reliability of large page allocation in the memfd code. "mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple) removes several now-unneeded PFN_* flags. "mm/damon: decouple sysfs from core" (SeongJae Park) implememnts some cleanup and maintainability work in the DAMON sysfs layer. "madvise cleanup" (Lorenzo Stoakes) does quite a lot of cleanup/maintenance work in the madvise() code. "madvise anon_name cleanups" (Vlastimil Babka) provides additional cleanups on top or Lorenzo's effort. "Implement numa node notifier" (Oscar Salvador) creates a standalone notifier for NUMA node memory state changes. Previously these were lumped under the more general memory on/offline notifier. "Make MIGRATE_ISOLATE a standalone bit" (Zi Yan) cleans up the pageblock isolation code and fixes a potential issue which doesn't seem to cause any problems in practice. "selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park) adds additional drgn- and python-based DAMON selftests which are more comprehensive than the existing selftest suite. "Misc rework on hugetlb faulting path" (Oscar Salvador) fixes a rather obscure deadlock in the hugetlb fault code and follows that fix with a series of cleanups. "cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport) rationalizes and cleans up the highmem-specific code in the CMA allocator. "mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand) provides cleanups and future-preparedness to the migration code. "mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park) adds some tracepoints to some DAMON auto-tuning code. "mm/damon: fix misc bugs in DAMON modules" (SeongJae Park) does that. "mm/damon: misc cleanups" (SeongJae Park) also does what it claims. "mm: folio_pte_batch() improvements" (David Hildenbrand) cleans up the large folio PTE batching code. "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park) facilitates dynamic alteration of DAMON's inter-node allocation policy. "Remove unmap_and_put_page()" (Vishal Moola) provides a couple of page->folio conversions. "mm: per-node proactive reclaim" (Davidlohr Bueso) implements a per-node control of proactive reclaim - beyond the current memcg-based implementation. "mm/damon: remove damon_callback" (SeongJae Park) replaces the damon_callback interface with a more general and powerful damon_call()+damos_walk() interface. "mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes) implements a number of mremap cleanups (of course) in preparation for adding new mremap() functionality: newly permit the remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It still excludes some specialized situations where this cannot be performed reliably. "drop hugetlb_free_pgd_range()" (Anthony Yznaga) switches some sparc hugetlb code over to the generic version and removes the thus-unneeded hugetlb_free_pgd_range(). "mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park) augments the present userspace-requested update of DAMON sysfs monitoring files. Automatic update is now provided, along with a tunable to control the update interval. "Some randome fixes and cleanups to swapfile" (Kemeng Shi) does what is claims. "mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand) provides (and uses) a means by which debug-style functions can grab a copy of a pageframe and inspect it locklessly without tripping over the races inherent in operating on the live pageframe directly. "use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan) addresses the large contention issues which can be triggered by reads from that procfs file. Latencies are reduced by more than half in some situations. The series also introduces several new selftests for the /proc/pid/maps interface. "__folio_split() clean up" (Zi Yan) cleans up __folio_split()! "Optimize mprotect() for large folios" (Dev Jain) provides some quite large (>3x) speedups to mprotect() when dealing with large folios. "selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian) does some cleanup work in the selftests code. "tools/testing: expand mremap testing" (Lorenzo Stoakes) extends the mremap() selftest in several ways, including adding more checking of Lorenzo's recently added "permit mremap() move of multiple VMAs" feature. "selftests/damon/sysfs.py: test all parameters" (SeongJae Park) extends the DAMON sysfs interface selftest so that it tests all possible user-requested parameters. Rather than the present minimal subset" * tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits) MAINTAINERS: add missing headers to mempory policy & migration section MAINTAINERS: add missing file to cgroup section MAINTAINERS: add MM MISC section, add missing files to MISC and CORE MAINTAINERS: add missing zsmalloc file MAINTAINERS: add missing files to page alloc section MAINTAINERS: add missing shrinker files MAINTAINERS: move memremap.[ch] to hotplug section MAINTAINERS: add missing mm_slot.h file THP section MAINTAINERS: add missing interval_tree.c to memory mapping section MAINTAINERS: add missing percpu-internal.h file to per-cpu section mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info() selftests/damon: introduce _common.sh to host shared function selftests/damon/sysfs.py: test runtime reduction of DAMON parameters selftests/damon/sysfs.py: test non-default parameters runtime commit selftests/damon/sysfs.py: generalize DAMON context commit assertion selftests/damon/sysfs.py: generalize monitoring attributes commit assertion selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion selftests/damon/sysfs.py: test DAMOS filters commitment selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion selftests/damon/sysfs.py: test DAMOS destinations commitment ...