linux/arch/powerpc/sysdev/qe_lib/Kconfig, branch master

QE: Move QE from arch/powerpc to drivers/soc

2015-12-22T23:12:56Z

ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: Zhao Qiang Signed-off-by: Scott Wood

powerpc/qe: Fix Kconfig enablement of QE_USB support

2013-03-15T16:14:15Z

Commit 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b changed the USB gadget Kconfig symbol from USB_GADGET_FSL_QE to USB_FSL_QE, but did not update the associated symbol name in qe_lib to match. Signed-off-by: Kumar Gala

powerpc/qe: Select QE_USB with USB_GADGET_FSL_QE

2008-12-30T18:12:12Z

Boards should know when QE_USB is used, so that they can configure USB clocks and pins. Another option would be to add 'select QE_USB' into USB_GADGET_FSL_QE, but selects are evil since they don't support dependencies. While at it, also remove 'host' from the symbol description, since the QE_USB code is used to support the gadget driver as well. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

powerpc/QE: move QE_GPIO Kconfig symbol into the platforms/Kconfig

2008-10-13T16:09:58Z

Specifying user-selectable option in the qe_lib/Kconfig was a bad idea because the qe_lib/Kconfig is included into the top level Kconfig, and thus the QE_GPIO option appears at the top level menu. This patch effectively moves the QE_GPIO option under the platform menu instead. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

gpiolib: allow user-selection

2008-07-25T17:53:30Z

This patch adds functionality to the gpio-lib subsystem to make it possible to enable the gpio-lib code even if the architecture code didn't request to get it built in. The archtitecture code does still need to implement the gpiolib accessor functions in its asm/gpio.h file. This patch adds the implementations for x86 and PPC. With these changes it is possible to run generic GPIO expansion cards on every architecture that implements the trivial wrapper functions. Support for more architectures can easily be added. Signed-off-by: Michael Buesch Cc: Benjamin Herrenschmidt Cc: Stephen Rothwell Cc: David Brownell Cc: Russell King Cc: Haavard Skinnemoen Cc: Jesper Nilsson Cc: Ralf Baechle Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Jean Delvare Cc: Samuel Ortiz Cc: Kumar Gala Cc: Sam Ravnborg Cc: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc/QE: implement support for the GPIO LIB API

2008-06-10T16:11:10Z

This is needed to access QE GPIOs via Linux GPIO API. Signed-off-by: Anton Vorontsov Acked-By: Timur Tabi Signed-off-by: Kumar Gala

powerpc/QE: add support for QE USB clocks routing

2008-06-10T15:39:13Z

This patch adds a function to the qe_lib to setup QE USB clocks routing. To setup clocks safely, cmxgcr register needs locking, so I just reused ucc_lock since it was used only to protect cmxgcr. The idea behind placing clocks routing functions into the qe_lib is that later we'll hopefully switch to the generic Linux Clock API, thus, for example, FHCI driver may be used for QE and CPM chips without nasty #ifdefs. This patch also fixes QE_USB_RESTART_TX command definition in the qe.h. Signed-off-by: Anton Vorontsov Acked-By: Timur Tabi Signed-off-by: Kumar Gala

[POWERPC] QE: Add support for Freescale QUICCEngine UART

2008-01-24T01:34:10Z

Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala

[POWERPC] QE: fix Kconfig 'select' warning with UCC_FAST

2007-05-23T12:23:55Z

The UCC_GETH Kconfig option in drivers/net/Kconfig had a line to select the UCC_FAST option is arch/powerpc/sysdev/qe_lib/Kconfig, which is only used on PowerPC builds. On other architectures, this would generated a warning. The fix is to have UCC_FAST depend on UCC_GETH. Signed-off-by: Timur Tabi Signed-off-by: Andrew Morton Signed-off-by: Kumar Gala

[POWERPC] QE: automatically select QE options

2007-03-26T22:05:22Z

Change the Kconfig files so that the Freescale QE options are automatically selected if a QE device is selected. Previously, you'd need to manually select UCC_FAST if you want any "fast" UCC devices, such as Gigabit Ethernet. Now, the QE Gigabit Ethernet option is always available if the device has a QE, and UCC_FAST is automatically enabled. A side-effect is that the "QE Options" menu no longer exists. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala