linux/arch/xtensa/include, branch v4.9

xtensa: wire up new pkey_{mprotect,alloc,free} syscalls

2016-11-14T20:31:49Z

Signed-off-by: Max Filippov

Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2016-10-12T06:38:39Z

Pull uaccess.h prepwork from Al Viro: "Preparations to tree-wide switch to use of linux/uaccess.h (which, obviously, will allow to start unifying stuff for real). The last step there, ie PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h` is not taken here - I would prefer to do it once just before or just after -rc1. However, everything should be ready for it" * 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: remove a stray reference to asm/uaccess.h in docs sparc64: separate extable_64.h, switch elf_64.h to it score: separate extable.h, switch module.h to it mips: separate extable.h, switch module.h to it x86: separate extable.h, switch sections.h to it remove stray include of asm/uaccess.h from cacheflush.h mn10300: remove a bogus processor.h->uaccess.h include xtensa: split uaccess.h into C and asm sides bonding: quit messing with IOCTL kill __kernel_ds_p off mn10300: finish verify_area() off frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h exceptions: detritus removal

Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-10-10T18:01:51Z

Pull protection keys syscall interface from Thomas Gleixner: "This is the final step of Protection Keys support which adds the syscalls so user space can actually allocate keys and protect memory areas with them. Details and usage examples can be found in the documentation. The mm side of this has been acked by Mel" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pkeys: Update documentation x86/mm/pkeys: Do not skip PKRU register if debug registers are not used x86/pkeys: Fix pkeys build breakage for some non-x86 arches x86/pkeys: Add self-tests x86/pkeys: Allow configuration of init_pkru x86/pkeys: Default to a restrictive init PKRU pkeys: Add details of system call use to Documentation/ generic syscalls: Wire up memory protection keys syscalls x86: Wire up protection keys system calls x86/pkeys: Allocation/free syscalls x86/pkeys: Make mprotect_key() mask off additional vm_flags mm: Implement new pkey_mprotect() system call x86/pkeys: Add fault handling for PF_PK page fault bit

Merge tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa

2016-10-06T00:44:48Z

Pull Xtensa updates from Max Filippov: "Updates for the xtensa architecture. It is a combined set of patches for 4.8 that never got to the mainline and new patches for 4.9. - add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB KSEG size, starting at physical address other than 0 - make kernel load address configurable - clean up kernel memory layout macros - drop sysmem early allocator and switch to memblock - enable kmemleak and memory reservation from the device tree - wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range, preadv2 and pwritev2 - add new platform: Cadence Configurable System Platform (CSP) and new core variant for it: xt_lnx - rearrange CCOUNT calibration code, make most of it generic - improve machine reset code (XTFPGA now reboots reliably with MMUv3 cores) - provide default memmap command line option for configurations without device tree support - ISS fixes: simdisk is now capable of using highmem pages, panic correctly terminates simulator" * tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa: (24 commits) xtensa: disable MMU initialization option on MMUv2 cores xtensa: add default memmap and mmio32native options to defconfigs xtensa: add default memmap option to common_defconfig xtensa: add default memmap option to iss_defconfig xtensa: ISS: allow simdisk to use high memory buffers xtensa: ISS: define simc_exit and use it instead of inline asm xtensa: xtfpga: group platform_* functions together xtensa: rearrange CCOUNT calibration xtensa: xtfpga: use clock provider, don't update DT xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config. xtensa: initialize MMU before jumping to reset vector xtensa: fix icountlevel setting in cpu_reset xtensa: extract common CPU reset code into separate function xtensa: Added Cadence CSP kernel configuration for Xtensa xtensa: fix default kernel load address xtensa: wire up new syscalls xtensa: support reserved-memory DT node xtensa: drop sysmem and switch to memblock xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE} xtensa: cleanup MMU setup and kernel layout macros ...

xtensa: split uaccess.h into C and asm sides

2016-09-28T01:15:21Z

Signed-off-by: Al Viro

exceptions: detritus removal

2016-09-28T01:15:14Z

externs and defines for stuff that is never used Signed-off-by: Al Viro

xtensa: extract common CPU reset code into separate function

2016-09-12T06:53:22Z

platform_restart implementatations do the same thing to reset CPU. Don't duplicate that code, move it to a function and call it from platform_restart. Signed-off-by: Max Filippov

x86/pkeys: Allocation/free syscalls

2016-09-09T11:02:27Z

This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen Acked-by: Mel Gorman Cc: linux-arch@vger.kernel.org Cc: Dave Hansen Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner

Merge tag 'xtensa-for-next-20160731' of git://github.com/jcmvbkbc/linux-xtensa into for_next

2016-08-03T22:30:00Z

Xtensa improvements for 4.8: - add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB KSEG size, starting at physical address other than 0; - make kernel load address configurable; - clean up kernel memory layout macros; - drop sysmem early allocator and switch to memblock; - enable kmemleak and memory reservation from the device tree; - wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range, preadv2 and pwritev2.

xtensa: wire up new syscalls

2016-07-31T03:50:32Z

Wire up userfaultfd, membarrier, mlock2, copy_file_range, preadv2, pwritev2 Signed-off-by: Max Filippov