linux/arch/xtensa/kernel/vmlinux.lds.S, branch v4.9

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30Z

When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf Acked-by: Peter Zijlstra (Intel) Tested-by: Peter Zijlstra (Intel) Tested-by: Daniel Thompson [arm] Tested-by: Petr Mladek Cc: Aaron Tomlin Cc: Peter Zijlstra (Intel) Cc: "Rafael J. Wysocki" Cc: Russell King Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

xtensa: cleanup MMU setup and kernel layout macros

2016-07-24T03:33:58Z

Make kernel load address explicit, independent of the selected MMU configuration and configurable from Kconfig. Do not restrict it to the first 512MB of the physical address space. Cleanup kernel memory layout macros: - rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR; - drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS; - introduce PHYS_OFFSET and use it in __va and __pa definitions; - synchronize MMU/noMMU vectors, drop unused NMI vector; - replace hardcoded vectors offset of 0x3000 with Kconfig symbol. Signed-off-by: Max Filippov

xtensa: drop unused sections and remapped reset handlers

2015-11-03T14:19:39Z

There are no .bootstrap or .ResetVector.text sections linked to the vmlinux image, drop these sections from vmlinux.ld.S. Drop RESET_VECTOR_VADDR definition only used for .ResetVector.text. Drop remapped copies of primary and secondary reset vectors, as modern gdb don't have problems stepping through instructions at arbitrary locations. Drop corresponding sections from the corresponding linker scripts. Signed-off-by: Max Filippov

xtensa: fix secondary core boot in SMP

2015-11-03T14:19:38Z

There are multiple factors adding to the issue in different configurations: - commit 17290231df16eeee ("xtensa: add fixup for double exception raised in window overflow") added function window_overflow_restore_a0_fixup to double exception vector overlapping reset vector location of secondary processor cores. - on MMUv2 cores RESET_VECTOR1_VADDR may point to uncached kernel memory making code overlapping depend on cache type and size, so that without cache or with WT cache reset vector code overwrites double exception code, making issue even harder to detect. - on MMUv3 cores RESET_VECTOR1_VADDR may point to unmapped area, as MMUv3 cores change virtual address map to match MMUv2 layout, but reset vector virtual address is given for the original MMUv3 mapping. - physical memory region of the secondary reset vector is not reserved in the physical memory map, and thus may be allocated and overwritten at arbitrary moment. Fix it as follows: - move window_overflow_restore_a0_fixup code to .text section. - define RESET_VECTOR1_VADDR so that it points to reset vector in the cacheable MMUv2 map for cores with MMU. - reserve reset vector region in the physical memory map. Drop separate literal section and build mxhead.S with text section literals. Cc: Signed-off-by: Max Filippov

xtensa: don't allow overflow/underflow on unaligned stack

2014-08-14T07:59:32Z

Double exceptions that happen during register window overflow/underflow are handled in the topmost stack frame, as if it was the only exception that occured. However unaligned access exception handler is special because it needs to analyze instruction that caused the exception, but the userspace instruction that triggered window exception is completely irrelevant. Unaligned data access is rather normal in the generic userspace code, but stack pointer manipulation must always be done by architecture-aware code and thus unaligned stack means a serious problem anyway. Use the default unaligned access handler that raises SIGBUS in case of unaligned access in window overflow/underflow handler. Signed-off-by: Max Filippov

xtensa: add fixup for double exception raised in window overflow

2014-06-09T00:46:00Z

There are two FIXMEs in the double exception handler 'for the extremely unlikely case'. This case gets hit by gcc during kernel build once in a few hours, resulting in an unrecoverable exception condition. Provide missing fixup routine to handle this case. Double exception literals now need 8 more bytes, add them to the linker script. Also replace bbsi instructions with bbsi.l as we're branching depending on 8th and 7th LSB-based bits of exception address. This may be tested by adding the explicit DTLB invalidation to window overflow handlers, like the following: --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -592,6 +592,14 @@ ENDPROC(_WindowUnderflow4) ENTRY_ALIGN64(_WindowOverflow8) s32e a0, a9, -16 + bbsi.l a9, 31, 1f + rsr a0, ccount + bbsi.l a0, 4, 1f + pdtlb a0, a9 + idtlb a0 + movi a0, 9 + idtlb a0 +1: l32e a0, a1, -12 s32e a2, a9, -8 s32e a1, a9, -12 Cc: stable@vger.kernel.org Signed-off-by: Max Filippov

xtensa: add SMP support

2014-01-14T18:19:58Z

This is largely based on SMP code from the xtensa-2.6.29-smp tree by Piet Delaney, Marc Gauthier, Joe Taylor, Christian Zankel (and possibly other Tensilica folks). Signed-off-by: Max Filippov Signed-off-by: Chris Zankel

xtensa: add MMU v3 support

2013-05-09T08:07:09Z

MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB way 6: Way 6 (512 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0x00000000 0x00000000 0x01 0x03 RWX Bypass 0x20000000 0x20000000 0x01 0x03 RWX Bypass 0x40000000 0x40000000 0x01 0x03 RWX Bypass 0x60000000 0x60000000 0x01 0x03 RWX Bypass 0x80000000 0x80000000 0x01 0x03 RWX Bypass 0xa0000000 0xa0000000 0x01 0x03 RWX Bypass 0xc0000000 0xc0000000 0x01 0x03 RWX Bypass 0xe0000000 0xe0000000 0x01 0x03 RWX Bypass This patch adds remapping code at the reset vector or at the kernel _start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that reconfigures MMUv3 as MMUv2: Way 5 (128 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xd0000000 0x00000000 0x01 0x07 RWX WB 0xd8000000 0x00000000 0x01 0x03 RWX Bypass Way 6 (256 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xe0000000 0xf0000000 0x01 0x07 RWX WB 0xf0000000 0xf0000000 0x01 0x03 RWX Bypass Signed-off-by: Max Filippov Signed-off-by: Chris Zankel

xtensa: dispatch medium-priority interrupts

2013-02-24T03:12:52Z

Add support for dispatching medium-priority interrupts, that is, interrupts of priority levels 2 to EXCM_LEVEL. IRQ handling may be preempted by higher priority IRQ. Signed-off-by: Marc Gauthier Signed-off-by: Max Filippov Signed-off-by: Chris Zankel

xtensa: drop CONFIG_EMBEDDED_RAMDISK

2012-10-03T22:13:09Z

Remove Kconfig entries, boot subdirectory, dependencies from other boot-* Makefiles, and sections from ld scripts. Remove stale redboot code that used to pass initrd addresses in a3 and a4 to _start. Signed-off-by: Max Filippov Signed-off-by: Chris Zankel