linux/arch/xtensa/kernel, branch v4.9

xtensa: clean up printk usage for boot/crash logging

2016-11-07T07:31:46Z

Convert printk(KERN_* to pr_* and printk's without level to pr_cont. This fixes torn register dumps, stack dumps, stack traces and timestamps in the middle of 'Calibrating CPU frequency' message. Also drop unused show_code and drop false comment about show_stack. Signed-off-by: Max Filippov

Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2016-10-12T06:38:39Z

Pull uaccess.h prepwork from Al Viro: "Preparations to tree-wide switch to use of linux/uaccess.h (which, obviously, will allow to start unifying stuff for real). The last step there, ie PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h` is not taken here - I would prefer to do it once just before or just after -rc1. However, everything should be ready for it" * 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: remove a stray reference to asm/uaccess.h in docs sparc64: separate extable_64.h, switch elf_64.h to it score: separate extable.h, switch module.h to it mips: separate extable.h, switch module.h to it x86: separate extable.h, switch sections.h to it remove stray include of asm/uaccess.h from cacheflush.h mn10300: remove a bogus processor.h->uaccess.h include xtensa: split uaccess.h into C and asm sides bonding: quit messing with IOCTL kill __kernel_ds_p off mn10300: finish verify_area() off frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h exceptions: detritus removal

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30Z

When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf Acked-by: Peter Zijlstra (Intel) Tested-by: Peter Zijlstra (Intel) Tested-by: Daniel Thompson [arm] Tested-by: Petr Mladek Cc: Aaron Tomlin Cc: Peter Zijlstra (Intel) Cc: "Rafael J. Wysocki" Cc: Russell King Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa

2016-10-06T00:44:48Z

Pull Xtensa updates from Max Filippov: "Updates for the xtensa architecture. It is a combined set of patches for 4.8 that never got to the mainline and new patches for 4.9. - add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB KSEG size, starting at physical address other than 0 - make kernel load address configurable - clean up kernel memory layout macros - drop sysmem early allocator and switch to memblock - enable kmemleak and memory reservation from the device tree - wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range, preadv2 and pwritev2 - add new platform: Cadence Configurable System Platform (CSP) and new core variant for it: xt_lnx - rearrange CCOUNT calibration code, make most of it generic - improve machine reset code (XTFPGA now reboots reliably with MMUv3 cores) - provide default memmap command line option for configurations without device tree support - ISS fixes: simdisk is now capable of using highmem pages, panic correctly terminates simulator" * tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa: (24 commits) xtensa: disable MMU initialization option on MMUv2 cores xtensa: add default memmap and mmio32native options to defconfigs xtensa: add default memmap option to common_defconfig xtensa: add default memmap option to iss_defconfig xtensa: ISS: allow simdisk to use high memory buffers xtensa: ISS: define simc_exit and use it instead of inline asm xtensa: xtfpga: group platform_* functions together xtensa: rearrange CCOUNT calibration xtensa: xtfpga: use clock provider, don't update DT xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config. xtensa: initialize MMU before jumping to reset vector xtensa: fix icountlevel setting in cpu_reset xtensa: extract common CPU reset code into separate function xtensa: Added Cadence CSP kernel configuration for Xtensa xtensa: fix default kernel load address xtensa: wire up new syscalls xtensa: support reserved-memory DT node xtensa: drop sysmem and switch to memblock xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE} xtensa: cleanup MMU setup and kernel layout macros ...

xtensa: split uaccess.h into C and asm sides

2016-09-28T01:15:21Z

Signed-off-by: Al Viro

xtensa: rearrange CCOUNT calibration

2016-09-21T01:52:59Z

DT-enabled kernel should have a CPU node connected to a clock. This clock is the CCOUNT clock. Use old platform_calibrate_ccount call as a fallback when CPU node cannot be found or has no clock and in non-DT-enabled configurations. Drop no longer needed code that updates CPU clock-frequency property in the DT; drop DT-related code from the platform_calibrate_ccount too. Move of_clk_init to the top of time_init, so that clocks are initialized before CCOUNT calibration is attempted. Signed-off-by: Max Filippov

xtensa: initialize MMU before jumping to reset vector

2016-09-12T06:53:23Z

When reset is simulated MMU need to be brought into its initial state, because that's what bootloaders/OS kernels assume. This is especially important for MMUv3 because TLB state when the kernel is running is significatly different from its reset state. With this change it is possible to boot linux and get back to U-Boot repeatedly. Signed-off-by: Max Filippov

xtensa: fix icountlevel setting in cpu_reset

2016-09-12T06:53:22Z

icountlevel SR value specifies lowest intlevel that does not do instruction counting, so to disable instruction counting completely it must be set to 0, not to 15. Signed-off-by: Max Filippov

xtensa: extract common CPU reset code into separate function

2016-09-12T06:53:22Z

platform_restart implementatations do the same thing to reset CPU. Don't duplicate that code, move it to a function and call it from platform_restart. Signed-off-by: Max Filippov

dma-mapping: use unsigned long for dma_attrs

2016-08-04T12:50:07Z

The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski Acked-by: Vineet Gupta Acked-by: Robin Murphy Acked-by: Hans-Christian Noren Egtvedt Acked-by: Mark Salter [c6x] Acked-by: Jesper Nilsson [cris] Acked-by: Daniel Vetter [drm] Reviewed-by: Bart Van Assche Acked-by: Joerg Roedel [iommu] Acked-by: Fabien Dessenne [bdisp] Reviewed-by: Marek Szyprowski [vb2-core] Acked-by: David Vrabel [xen] Acked-by: Konrad Rzeszutek Wilk [xen swiotlb] Acked-by: Joerg Roedel [iommu] Acked-by: Richard Kuo [hexagon] Acked-by: Geert Uytterhoeven [m68k] Acked-by: Gerald Schaefer [s390] Acked-by: Bjorn Andersson Acked-by: Hans-Christian Noren Egtvedt [avr32] Acked-by: Vineet Gupta [arc] Acked-by: Robin Murphy [arm64 and dma-iommu] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds