linux/arch, branch v2.6.23

[MIPS] Au1000: set the PCI controller IO base

2007-10-09T11:47:48Z

The PCI controller IO base was not set in the au1000 pci code. Signed-off-by: Felix Fietkau Signed-off-by: John Crispin Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle

[MIPS] Alchemy: Fix USB initialization.

2007-10-09T11:47:48Z

This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè Cc: Ralf Baechle Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Felix Fietkau Signed-off-by: John Crispin Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle

[MIPS] IP32: Fix fatal typo in address computation.

2007-10-09T11:47:48Z

Signed-off-by: Giuseppe Sacco Signed-off-by: Ralf Baechle

Longhaul: add auto enabled "revid_errata" option

2007-10-07T23:28:43Z

VIA C3 Ezra-T has RevisionID equal to 1, but it needs RevisionKey to be 0 or CPU will ignore new frequency and will continue to work at old frequency. New "revid_errata" option will force RevisionKey to be set to 0, whatever RevisionID is. Additionaly "Longhaul" will not silently ignore unsuccessful transition. It will try to check if "revid_errata" or "disable_acpi_c3" options need to be enabled for this processor/system. Same for Longhaul ver. 2 support. It will be disabled if none of above options will work. Best case scenario (with patch apllied and v2 enabled): longhaul: VIA C3 'Ezra' [C5C] CPU detected. Longhaul v2 supported. longhaul: Using northbridge support. longhaul: VRM 8.5 longhaul: Max VID=1.350 Min VID=1.050, 13 possible voltage scales longhaul: f: 300000 kHz, index: 0, vid: 1050 mV [...] longhaul: Voltage scaling enabled. Worst case scenario: longhaul: VIA C3 'Ezra-T' [C5M] CPU detected. Powersaver supported. longhaul: Using northbridge support. longhaul: Using ACPI support. longhaul: VRM 8.5 longhaul: Claims to support voltage scaling but min & max are both 1.250. Voltage scaling disabled longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Disabling ACPI C3 support. longhaul: Disabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

2007-10-06T22:47:16Z

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP32: Enable PCI bridges

Merge master.kernel.org:/home/rmk/linux-2.6-arm

2007-10-05T21:09:10Z

* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspend [ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspend

[ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspend

2007-10-05T20:21:43Z

Ensure nRSTOUT is not asserted during or on resume. Signed-off-by: Ben Dooks Signed-off-by: Russell King

[ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspend

2007-10-05T20:21:40Z

Ensure that CPLD is restored to the original state on resume, and that before going into suspend we select the NAND bank we booted from for restarting. Signed-off-by: Ben Dooks Signed-off-by: Russell King

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

2007-10-05T15:08:08Z

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix 'niu' complex IRQ probing. [SPARC64]: check fork_idle() error [SPARC64]: Temporary workaround for PCI-E slot on T1000. [SPARC64]: VIO device addition log message level is too high. [SPARC64]: Fix domain-services port probing. [SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.

[MIPS] IP32: Enable PCI bridges

2007-10-05T12:31:22Z

Fixe MACE PCI addressing by adding the bus number parameter. Remove check of the used slot since every slot should be valid. Converted mkaddr from #define to inline function. Signed-off-by: Giuseppe Sacco Signed-off-by: Ralf Baechle