linux/arch, branch v5.12

Merge tag 'perf_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2021-04-25T16:42:06Z

Pull x86 perf fixes from Borislav Petkov: - Fix Broadwell Xeon's stepping in the PEBS isolation table of CPUs - Fix a panic when initializing perf uncore machinery on Haswell and Broadwell servers * tag 'perf_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[] perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3

Merge tag 'x86_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2021-04-25T16:02:13Z

Pull x86 fix from Borislav Petkov: "Fix an out-of-bounds memory access when setting up a crash kernel with kexec" * tag 'x86_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2021-04-24T16:40:18Z

Pull kvm fix from Paolo Bonzini: "Fix SRCU bug introduced in the merge window" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/xen: Take srcu lock when accessing kvm_memslots()

KVM: x86/xen: Take srcu lock when accessing kvm_memslots()

2021-04-23T21:00:50Z

kvm_memslots() will be called by kvm_write_guest_offset_cached() so we should take the srcu lock. Let's pull the srcu lock operation from kvm_steal_time_set_preempted() again to fix xen part. Fixes: 30b5c851af7 ("KVM: x86/xen: Add support for vCPU runstate information") Signed-off-by: Wanpeng Li Message-Id: <1619166200-9215-1-git-send-email-wanpengli@tencent.com> Reviewed-by: Sean Christopherson Signed-off-by: Paolo Bonzini

Merge tag 'arm-fixes-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-04-23T20:01:05Z

Pull ARM SoC fixes from Arnd Bergmann: "These should be the final fixes for v5.12. There is one fix for SD card detection on one Allwinner board, and a few fixes for the Tegra platform that I had already queued up for v5.13 due to a communication problem. This addresses MMC device ordering on multiple machines, audio support on Jetson AGX Xavier and suspend/resume on Jetson TX2" * tag 'arm-fixes-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS arm64: tegra: Move clocks from RT5658 endpoint to device node arm64: tegra: Fix mmc0 alias for Jetson Xavier NX arm64: tegra: Set fw_devlink=on for Jetson TX2 arm64: tegra: Add unit-address for ACONNECT on Tegra186

Merge branch 'tegra/dt64' into arm/fixes

2021-04-23T13:38:13Z

arm64: tegra: Device tree fixes for v5.12-rc6 This contains a couple of device tree fixes for the v5.12 release cycle. These are needed for proper audio support on Jetson AGX Xavier, to boot the Jetson Xavier NX from an SD card and to be able to suspend/resume the Jetson TX2. * tegra/dt64: arm64: tegra: Move clocks from RT5658 endpoint to device node arm64: tegra: Fix mmc0 alias for Jetson Xavier NX arm64: tegra: Set fw_devlink=on for Jetson TX2 arm64: tegra: Add unit-address for ACONNECT on Tegra186 Link: https://lore.kernel.org/linux-arm-kernel/YILD4yyPXuiYbHW1@orome.fritz.box/ Signed-off-by: Arnd Bergmann

Merge tag 'sunxi-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

2021-04-22T21:18:30Z

One fix for the MMC card detect on the Pine H64 board * tag 'sunxi-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS Link: https://lore.kernel.org/r/45fc5e4d-ef48-4729-a869-79a8f288bb83.lettre@localhost Signed-off-by: Arnd Bergmann

perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]

2021-04-22T12:36:01Z

The only stepping of Broadwell Xeon parts is stepping 1. Fix the relevant isolation_ucodes[] entry, which previously enumerated stepping 2. Although the original commit was characterized as an optimization, it is also a workaround for a correctness issue. If a PMI arrives between kvm's call to perf_guest_get_msrs() and the subsequent VM-entry, a stale value for the IA32_PEBS_ENABLE MSR may be restored at the next VM-exit. This is because, unbeknownst to kvm, PMI throttling may clear bits in the IA32_PEBS_ENABLE MSR. CPUs with "PEBS isolation" don't suffer from this issue, because perf_guest_get_msrs() doesn't report the IA32_PEBS_ENABLE value. Fixes: 9b545c04abd4f ("perf/x86/kvm: Avoid unnecessary work in guest filtering") Signed-off-by: Jim Mattson Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Peter Shier Acked-by: Andi Kleen Link: https://lkml.kernel.org/r/20210422001834.1748319-1-jmattson@google.com

arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS

2021-04-22T07:43:15Z

Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module, along the way with the Pine64-LTS, which share the same base .dtsi. This was based on the observation that the Pine64-LTS has as "push-push" SD card socket, and that the schematic mentions the card detect GPIO. After having received two reports about failing SD card access with that patch, some more research and polls on that subject revealed that there are at least two different versions of the Pine64-LTS out there: - On some boards (including mine) the card detect pin is "stuck" at high, regardless of an microSD card being inserted or not. - On other boards the card-detect is working, but is active-high, by virtue of an explicit inverter circuit, as shown in the schematic. To cover all versions of the board out there, and don't take any chances, let's revert the introduction of the active-low CD GPIO, but let's use the broken-cd property for the Pine64-LTS this time. That should avoid regressions and should work for everyone, even allowing SD card changes now. The SOPine card detect has proven to be working, so let's keep that GPIO in place. Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") Reported-by: Michael Weiser Reported-by: Daniel Kulesz Suggested-by: Chen-Yu Tsai Signed-off-by: Andre Przywara Tested-by: Michael Weiser Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210414104740.31497-1-andre.przywara@arm.com

perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3

2021-04-21T11:55:39Z

There may be a kernel panic on the Haswell server and the Broadwell server, if the snbep_pci2phy_map_init() return error. The uncore_extra_pci_dev[HSWEP_PCI_PCU_3] is used in the cpu_init() to detect the existence of the SBOX, which is a MSR type of PMON unit. The uncore_extra_pci_dev is allocated in the uncore_pci_init(). If the snbep_pci2phy_map_init() returns error, perf doesn't initialize the PCI type of the PMON units, so the uncore_extra_pci_dev will not be allocated. But perf may continue initializing the MSR type of PMON units. A null dereference kernel panic will be triggered. The sockets in a Haswell server or a Broadwell server are identical. Only need to detect the existence of the SBOX once. Current perf probes all available PCU devices and stores them into the uncore_extra_pci_dev. It's unnecessary. Use the pci_get_device() to replace the uncore_extra_pci_dev. Only detect the existence of the SBOX on the first available PCU device once. Factor out hswep_has_limit_sbox(), since the Haswell server and the Broadwell server uses the same way to detect the existence of the SBOX. Add some macros to replace the magic number. Fixes: 5306c31c5733 ("perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes") Reported-by: Steve Wahl Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Tested-by: Steve Wahl Link: https://lkml.kernel.org/r/1618521764-100923-1-git-send-email-kan.liang@linux.intel.com