<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux/crypto, branch v6.3</title>
<subtitle>Mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
</subtitle>
<id>https://git.shady.money/linux/atom?h=v6.3</id>
<link rel='self' href='https://git.shady.money/linux/atom?h=v6.3'/>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/'/>
<updated>2023-03-21T16:23:56Z</updated>
<entry>
<title>asymmetric_keys: log on fatal failures in PE/pkcs7</title>
<updated>2023-03-21T16:23:56Z</updated>
<author>
<name>Robbie Harwood</name>
<email>rharwood@redhat.com</email>
</author>
<published>2023-02-20T17:12:54Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=3584c1dbfffdabf8e3dc1dd25748bb38dd01cd43'/>
<id>urn:sha1:3584c1dbfffdabf8e3dc1dd25748bb38dd01cd43</id>
<content type='text'>
These particular errors can be encountered while trying to kexec when
secureboot lockdown is in place.  Without this change, even with a
signed debug build, one still needs to reboot the machine to add the
appropriate dyndbg parameters (since lockdown blocks debugfs).

Accordingly, upgrade all pr_debug() before fatal error into pr_warn().

Signed-off-by: Robbie Harwood &lt;rharwood@redhat.com&gt;
Signed-off-by: David Howells &lt;dhowells@redhat.com&gt;
cc: Jarkko Sakkinen &lt;jarkko@kernel.org&gt;
cc: Eric Biederman &lt;ebiederm@xmission.com&gt;
cc: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/ # v2
</content>
</entry>
<entry>
<title>verify_pefile: relax wrapper length check</title>
<updated>2023-03-21T16:23:17Z</updated>
<author>
<name>Robbie Harwood</name>
<email>rharwood@redhat.com</email>
</author>
<published>2023-02-20T17:12:53Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=4fc5c74dde69a7eda172514aaeb5a7df3600adb3'/>
<id>urn:sha1:4fc5c74dde69a7eda172514aaeb5a7df3600adb3</id>
<content type='text'>
The PE Format Specification (section "The Attribute Certificate Table
(Image Only)") states that `dwLength` is to be rounded up to 8-byte
alignment when used for traversal.  Therefore, the field is not required
to be an 8-byte multiple in the first place.

Accordingly, pesign has not performed this alignment since version
0.110.  This causes kexec failure on pesign'd binaries with "PEFILE:
Signature wrapper len wrong".  Update the comment and relax the check.

Signed-off-by: Robbie Harwood &lt;rharwood@redhat.com&gt;
Signed-off-by: David Howells &lt;dhowells@redhat.com&gt;
cc: Jarkko Sakkinen &lt;jarkko@kernel.org&gt;
cc: Eric Biederman &lt;ebiederm@xmission.com&gt;
cc: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Link: https://learn.microsoft.com/en-us/windows/win32/debug/pe-format#the-attribute-certificate-table-image-only
Link: https://github.com/rhboot/pesign
Link: https://lore.kernel.org/r/20230220171254.592347-2-rharwood@redhat.com/ # v2
</content>
</entry>
<entry>
<title>Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next</title>
<updated>2023-02-22T02:24:12Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2023-02-22T02:24:12Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=5b7c4cabbb65f5c469464da6c5f614cbd7f730f2'/>
<id>urn:sha1:5b7c4cabbb65f5c469464da6c5f614cbd7f730f2</id>
<content type='text'>
Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb-&gt;head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client &amp; AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant -&gt;clone() test in inet_clone_ulp().
  ...
</content>
</entry>
<entry>
<title>Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6</title>
<updated>2023-02-22T02:10:50Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2023-02-22T02:10:50Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=36289a03bcd3aabdf66de75cb6d1b4ee15726438'/>
<id>urn:sha1:36289a03bcd3aabdf66de75cb6d1b4ee15726438</id>
<content type='text'>
Pull crypto update from Herbert Xu:
 "API:
   - Use kmap_local instead of kmap_atomic
   - Change request callback to take void pointer
   - Print FIPS status in /proc/crypto (when enabled)

  Algorithms:
   - Add rfc4106/gcm support on arm64
   - Add ARIA AVX2/512 support on x86

  Drivers:
   - Add TRNG driver for StarFive SoC
   - Delete ux500/hash driver (subsumed by stm32/hash)
   - Add zlib support in qat
   - Add RSA support in aspeed"

* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
  crypto: x86/aria-avx - Do not use avx2 instructions
  crypto: aspeed - Fix modular aspeed-acry
  crypto: hisilicon/qm - fix coding style issues
  crypto: hisilicon/qm - update comments to match function
  crypto: hisilicon/qm - change function names
  crypto: hisilicon/qm - use min() instead of min_t()
  crypto: hisilicon/qm - remove some unused defines
  crypto: proc - Print fips status
  crypto: crypto4xx - Call dma_unmap_page when done
  crypto: octeontx2 - Fix objects shared between several modules
  crypto: nx - Fix sparse warnings
  crypto: ecc - Silence sparse warning
  tls: Pass rec instead of aead_req into tls_encrypt_done
  crypto: api - Remove completion function scaffolding
  tls: Remove completion function scaffolding
  tipc: Remove completion function scaffolding
  net: ipv6: Remove completion function scaffolding
  net: ipv4: Remove completion function scaffolding
  net: macsec: Remove completion function scaffolding
  dm: Remove completion function scaffolding
  ...
</content>
</entry>
<entry>
<title>crypto: proc - Print fips status</title>
<updated>2023-02-14T05:39:33Z</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2023-02-09T01:16:45Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=c43cc8823d56b1d34744581e42d6eeaca028f1ab'/>
<id>urn:sha1:c43cc8823d56b1d34744581e42d6eeaca028f1ab</id>
<content type='text'>
As FIPS may disable algorithms it is useful to show their status
in /proc/crypto.

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Acked-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
</entry>
<entry>
<title>crypto: ecc - Silence sparse warning</title>
<updated>2023-02-14T05:39:33Z</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2023-02-06T04:53:38Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=5072b1c211107fca80b75f0ac0ca6f90e3385837'/>
<id>urn:sha1:5072b1c211107fca80b75f0ac0ca6f90e3385837</id>
<content type='text'>
Rewrite the bitwise operations to silence the sparse warnings:

  CHECK   ../crypto/ecc.c
../crypto/ecc.c:1387:39: warning: dubious: !x | y
../crypto/ecc.c:1397:47: warning: dubious: !x | y

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Reviewed-by: Vitaly Chikunov &lt;vt@altlinux.org&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
</entry>
<entry>
<title>crypto: api - Use data directly in completion function</title>
<updated>2023-02-13T10:35:14Z</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2023-02-08T05:58:44Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=255e48eb17684157336bd6dd98d22c1b2d9e3f43'/>
<id>urn:sha1:255e48eb17684157336bd6dd98d22c1b2d9e3f43</id>
<content type='text'>
This patch does the final flag day conversion of all completion
functions which are now all contained in the Crypto API.

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
</entry>
<entry>
<title>crypto: cryptd - Use request_complete helpers</title>
<updated>2023-02-13T10:34:49Z</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2023-02-08T05:56:00Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=f27c94aac5b071f402c0ff8ef439d4b2058502fd'/>
<id>urn:sha1:f27c94aac5b071f402c0ff8ef439d4b2058502fd</id>
<content type='text'>
Use the request_complete helpers instead of calling the completion
function directly.

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
</entry>
<entry>
<title>crypto: rsa-pkcs1pad - Use akcipher_request_complete</title>
<updated>2023-02-13T10:34:49Z</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2023-01-31T08:02:04Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=564cabc0ca0bdfa8f0fc1ae74b24d0a7554522c5'/>
<id>urn:sha1:564cabc0ca0bdfa8f0fc1ae74b24d0a7554522c5</id>
<content type='text'>
Use the akcipher_request_complete helper instead of calling the
completion function directly.  In fact the previous code was buggy
in that EINPROGRESS was never passed back to the original caller.

Fixes: 3d5b1ecdea6f ("crypto: rsa - RSA padding algorithm")
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
</entry>
<entry>
<title>crypto: engine - Use crypto_request_complete</title>
<updated>2023-02-13T10:34:49Z</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2023-01-31T08:02:02Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=6909823d47c17cba84e9244d04050b5db8d53789'/>
<id>urn:sha1:6909823d47c17cba84e9244d04050b5db8d53789</id>
<content type='text'>
Use the crypto_request_complete helper instead of calling the
completion function directly.

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
</entry>
</feed>
