linux/drivers/acpi/button.c, branch v5.0

ACPI / button: fix defined but not used warning

2018-07-09T09:32:44Z

Fix a build warning in the ACPI button driver when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/acpi/button.c:252:12: warning: 'acpi_button_state_seq_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap Signed-off-by: Rafael J. Wysocki

ACPI / button: increment wakeup count only when notified

2018-07-02T11:17:13Z

Because acpi_lid_initialize_state() is called on every system resume and it triggers acpi_lid_notify_state() which invokes acpi_pm_wakeup_event() for the lid device, the lid's wakeup count is incremented even if the lid was not the source of the event that woke up the system. That behavior confuses user space deamons using wakeup_count to identify the potential system wakeup source. To avoid the confusion, only trigger acpi_pm_wakeup_event() in the acpi_button_notify() path and don't do that in the acpi_lid_initialize_state() path. Signed-off-by: Ravi Chandra Sadineni Signed-off-by: Rafael J. Wysocki

proc: introduce proc_create_single{,_data}

2018-05-16T05:23:35Z

Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig

ACPI / button: make module loadable when booted in non-ACPI mode

2018-04-24T10:47:34Z

Modules such as nouveau.ko and i915.ko have a link time dependency on acpi_lid_open(), and due to its use of acpi_bus_register_driver(), the button.ko module that provides it is only loadable when booted in ACPI mode. However, the ACPI button driver can be built into the core kernel as well, in which case the dependency can always be satisfied, and the dependent modules can be loaded regardless of whether the system was booted in ACPI mode or not. So let's fix this asymmetry by making the ACPI button driver loadable as a module even if not booted in ACPI mode, so it can provide the acpi_lid_open() symbol in the same way as when built into the kernel. Signed-off-by: Ard Biesheuvel [ rjw: Minor adjustments of comments, whitespace and names. ] Signed-off-by: Rafael J. Wysocki

ACPI: button: Add a LID switch blacklist and add 1 model to it

2017-12-13T00:05:02Z

The GP-electronic T701 tablet does not have a LID switch, but it does define a LID device in its DSDT. The _LID method points to the "\\_SB.GPO2" pin 0x18 GPIO with a pull setting of "PullDefault", which leaves the pin floating. This causes the ACPI button driver to cause spurious LID closed events, causing the device to suspend while the user is using it. There is nothing the ACPI button driver (or the gpio code) can do to fix this, so the only solution is to add a DMI based blacklist and ignore the LID device on these tablets. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: button: Add a debug message when we're sending a LID event

2017-12-13T00:05:01Z

I've been debugging some spurious suspend issues on various devices, at least on some devices these spurious suspends are caused by surious LID closed events being send to userspace. Running e.g. evemu-record after noticing a spurious suspend is too late to detect that a LID closed event it the (probable) cause of this. This commit adds an acpi_handle_debug call to help debugging this. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

2017-11-15T21:46:33Z

Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()

ACPI / button: Delay acpi_lid_initialize_state() until first user space open

2017-11-08T23:30:44Z

ACPI _LID methods may depend on OpRegions and do not always handle handlers for those OpRegions not being present properly e.g. : Method (_LID, 0, NotSerialized) // _LID: Lid Status { If ((^^I2C5.PMI1.AVBL == One) && (^^GPO2.AVBL == One)) { Return (^^GPO2.LPOL) /* \_SB_.GPO2.LPOL */ } } Note the missing Return (1) when either of the OpRegions is not available, this causes (in this case) a report of the lid-switch being closed, which causes userspace to do an immediate suspend at boot. This commit delays getting the initial state and thus calling _LID for the first time until userspace opens the /dev/input/event# node. This ensures that all drivers will have had a chance to load and registerer their OpRegions before the first _LID call, fixing this issue. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

treewide: Fix function prototypes for module_param_call()

2017-10-31T14:30:37Z

Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook Signed-off-by: Jessica Yu

Merge tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-07-04T21:16:49Z

Pull ACPI updates from Rafael Wysocki: "These mostly update the ACPICA code in the kernel to upstream revision 20170531 which covers all of the new material from ACPI 6.2, including new tables (WSMT, HMAT, PPTT), new subtables and definition changes for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource descriptor macros for pin control, support for new predefined methods (_LSI, _LSR, _LSW, _HMA), fixes and cleanups. On top of that, an additional ACPICA change from Kees (which also is upstream already) switches all of the definitions of function pointer structures in ACPICA to use designated initializers so as to make the structure layout randomization GCC plugin work with it. The rest is a few fixes and cleanups in the EC driver, an xpower PMIC driver update, a new backlight blacklist entry, and update of the tables configfs interface and a messages formatting cleanup. Specifics: - Update the ACPICA code in the kernel to upstream revision revision 20170531 (which covers all of the new material from ACPI 6.2) including: * Support for the PinFunction(), PinConfig(), PinGroup(), PinGroupFunction(), and PinGroupConfig() resource descriptors (Mika Westerberg). * Support for new subtables in HEST and SRAT, new notify value for HEST, header support for TPM2 table changes, and BGRT Status field update (Bob Moore). * Support for new PCCT subtables (David Box). * Support for _LSI, _LSR, _LSW, and _HMA as predefined methods (Erik Schmauss). * Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng). * New UUID values for Processor Properties (Bob Moore). * New notify values for memory attributes and graceful shutdown (Bob Moore). * Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand). * Resource to AML conversion fix for resources containing GPIOs (Mika Westerberg). * Disassembler-related updates (Bob Moore, David Box, Erik Schmauss). * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng, Cao Jin). - Modify ACPICA to always use designated initializers for function pointer structures to make the structure layout randomization GCC plugin work with it (Kees Cook). - Update the tables configfs interface to unload SSDTs on configfs entry removal (Jan Kiszka). - Add support for the GPI1 regulator to the xpower PMIC Operation Region handler (Hans de Goede). - Fix ACPI EC issues related to conflicting EC definitions in the ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris Chiu). - Fix an interrupt storm issue in the EC driver and make its debug output work with dynamic debug as expected (Lv Zheng). - Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee). - Fix whitespace in pr_fmt() to align log entries properly in some places in the ACPI subsystem (Vincent Legoll)" * tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) ACPI / EC: Add quirk for GL720VMK ACPI / EC: Fix media keys not working problem on some Asus laptops ACPI / EC: Add support to skip boot stage DSDT probe ACPI / EC: Enhance boot EC sanity check ACPI / video: Add quirks for the Dell Precision 7510 ACPI: EC: Fix EC command visibility for dynamic debug ACPI: EC: Fix an EC event IRQ storming issue ACPICA: Use designated initializers ACPICA: Update version to 20170531 ACPICA: Update a couple of debug output messages ACPICA: acpiexec: enhance local signal handler ACPICA: Simplify output for the ACPI Debug Object ACPICA: Unix application OSL: Correctly handle control-c (EINTR) ACPICA: Improvements for debug output only ACPICA: Disassembler: allow conflicting external declarations to be emitted. ACPICA: Disassembler: add external op to namespace on first pass ACPICA: Disassembler: prevent external op's from opening a new scope ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag ACPICA: Changing External to a named object ACPICA: Update two error messages to emit control method name ...