linux/drivers/acpi/cppc_acpi.c, branch v5.7

ACPI: CPPC: clean up acpi_get_psd_map()

2020-03-28T12:25:41Z

In acpi_get_psd_map() variable all_cpu_data[] can't be NULL and variable match_cpc_ptr has been checked before, no need check again at the end of the funchtion. Some additional optimizations can be made on top of that. Signed-off-by: Liguang Zhang [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki

ACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit()

2019-10-18T08:36:37Z

When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Fixes: 85b1407bf6d2 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs") Signed-off-by: John Garry Cc: 4.15+ # 4.15+ Signed-off-by: Rafael J. Wysocki

ACPI / CPPC: do not require the _PSD method

2019-08-28T09:20:33Z

According to the ACPI 6.3 specification, the _PSD method is optional when using CPPC. The underlying assumption is that each CPU can change frequency independently from all other CPUs; _PSD is provided to tell the OS that some processors can NOT do that. However, the acpi_get_psd() function returns ENODEV if there is no _PSD method present, or an ACPI error status if an error occurs when evaluating _PSD, if present. This makes _PSD mandatory when using CPPC, in violation of the specification, and only on Linux. This has forced some firmware writers to provide a dummy _PSD, even though it is irrelevant, but only because Linux requires it; other OSPMs follow the spec. We really do not want to have OS specific ACPI tables, though. So, correct acpi_get_psd() so that it does not return an error if there is no _PSD method present, but does return a failure when the method can not be executed properly. This allows _PSD to be optional as it should be. Signed-off-by: Al Stone Signed-off-by: Rafael J. Wysocki

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441

2019-06-05T15:37:17Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Armijn Hemel Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge branches 'acpi-scan', 'acpi-tables', 'acpi-misc' and 'acpi-pm'

2019-05-06T08:49:39Z

* acpi-scan: ACPI / scan: Add labels for PNP button devices ACPI / scan: Simplify acpi_bus_extract_wakeup_device_power_package() * acpi-tables: ACPI / tables: Clean up whitespace * acpi-misc: ACPI / DPTF: Use dev_get_drvdata() ACPI: event: replace strcpy() by strscpy() ACPI: Fix comment typos * acpi-pm: ACPI: PM: Print debug messages when enabling GPEs for wakeup

ACPI: Fix comment typos

2019-03-26T21:33:43Z

Fix some misspellings in comments. No functional change intended. Signed-off-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki

ACPI / CPPC: Fix guaranteed performance handling

2019-03-25T22:57:21Z

As per the ACPI specification, "Guaranteed Performance Register" is a "Buffer" field and it cannot be "Integer", so treat the "Integer" type for "Guaranteed Performance Register" field as invalid and ignore its value in that case. Also save one cpc_read() call when "Guaranteed Performance Register" is not present, which means a register defined as: "Register(SystemMemory, 0, 0, 0, 0)". Fixes: 29523f095397 ("ACPI / CPPC: Add support for guaranteed performance") Suggested-by: Rafael J. Wysocki Signed-off-by: Srinivas Pandruvada Cc: 4.20+ # 4.20+ Signed-off-by: Rafael J. Wysocki

ACPI / CPPC: Add a helper to get desired performance

2019-02-18T10:27:42Z

This patch add a helper to get the value of desired performance register. Signed-off-by: Xiongfeng Wang [ rjw: More white space ] Signed-off-by: Rafael J. Wysocki

ACPI / CPPC: Add support for guaranteed performance

2018-10-16T08:33:38Z

The Continuous Performance Control package may contain an optional guaranteed performance field. Add support to read guaranteed performance from _CPC. Signed-off-by: Srinivas Pandruvada Signed-off-by: Rafael J. Wysocki

ACPI / CPPC: Fix invalid PCC channel status errors

2018-05-10T15:16:22Z

Replace the faulty PCC status register polling code with a iopoll.h macro to fix incorrect reporting of PCC check errors ("PCC check channel failed"). There were potential codepaths where we could incorrectly return PCC channel status as busy even without checking the PCC status register once or not checking the status register before breaking out of the polling loop. For example, if the thread polling PCC status register was preempted and scheduled back after we have crossed the deadline then we can report that the channel is busy even without checking the status register. Signed-off-by: Prashanth Prakash Signed-off-by: Rafael J. Wysocki