linux/drivers/acpi, branch v3.18

ACPI / video: update condition to check if device is in _DOD list

2014-12-01T01:09:18Z

Commit 0b8db271f159 ("ACPI / video: check _DOD list when creating backlight devices") checks if the video device is in the bind devices list to decide if we should create backlight device for it, that causes problem for one Dell Latitude E6410, where none of the video output devices are properly bound due to the way how we did the comparing between its _ADR and the _DOD's values. Solve this problem by comparing the lower 12 bits of both the device's _ADR and the _DOD's values instead of relying on bind result. Fixes: 0b8db271f159 ("ACPI / video: check _DOD list when creating backlight devices") Reported-and-tested-by: Brian Norris Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki

ACPI / PM: Ignore wakeup setting if the ACPI companion can't wake up

2014-11-20T00:24:16Z

As reported by Dmitry, on some Chromebooks there are devices with corresponding ACPI objects and with unusual system wakeup configuration. Namely, they technically are wakeup-capable, but the wakeup is handled via a platform-specific out-of-band mechanism and the ACPI PM layer has no information on the wakeup capability. As a result, device_may_wakeup(dev) called from acpi_dev_suspend_late() returns 'true' for those devices, but the wakeup.flags.valid flag is unset for the corresponding ACPI device objects, so acpi_device_wakeup() reproducibly fails for them causing acpi_dev_suspend_late() to return an error code. The entire system suspend is then aborted and the machines in question cannot suspend at all. Address the problem by ignoring the device_may_wakeup(dev) return value in acpi_dev_suspend_late() if the ACPI companion of the device being handled has wakeup.flags.valid unset (in which case it is clear that the wakeup is supposed to be handled by other means). This fixes a regression introduced by commit a76e9bd89ae7 (i2c: attach/detach I2C client device to the ACPI power domain) as the affected systems could suspend and resume successfully before that commit. Fixes: a76e9bd89ae7 (i2c: attach/detach I2C client device to the ACPI power domain) Reported-by: Dmitry Torokhov Reviewed-by: Dmitry Torokhov Cc: 3.13+ # 3.13+ Signed-off-by: Rafael J. Wysocki

Merge branch 'acpi-blacklist'

2014-11-14T14:17:17Z

* acpi-blacklist: ACPI / blacklist: blacklist Win8 OSI for Dell Vostro 3546

Merge branches 'acpi-scan' and 'acpi-ec'

2014-10-31T21:24:44Z

* acpi-scan: ACPI: Use ACPI companion to match only the first physical device * acpi-ec: ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer. Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"

ACPI / blacklist: blacklist Win8 OSI for Dell Vostro 3546

2014-10-30T00:32:43Z

The wireless hotkey of Dell Vostro 3546 does not work with Win8 OSI. Due to insufficient documentation for the driver implementation, blacklist it as a workaround. Signed-off-by: Adam Lee Signed-off-by: Rafael J. Wysocki

ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer.

2014-10-29T15:52:35Z

It is reported that Samsung laptops that need to poll events are broken by the following commit: Commit 3afcf2ece453e1a8c2c6de19cdf06da3772a1b08 Subject: ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set The behaviors of the 2 vendor firmwares are conflict: 1. Acer: OSPM shouldn't issue QR_EC unless SCI_EVT is set, firmware automatically sets SCI_EVT as long as there is event queued up. 2. Samsung: OSPM should issue QR_EC whatever SCI_EVT is set, firmware returns 0 when there is no event queued up. This patch is a quick fix to distinguish the behaviors to make Acer behavior only effective for Acer EC firmware so that the breakages on Samsung EC firmware can be avoided. Fixes: 3afcf2ece453 (ACPI / EC: Add support to disallow QR_EC to be issued ...) Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161 Reported-and-tested-by: Ortwin Glück Signed-off-by: Lv Zheng Cc: 3.17+ # 3.17+ [ rjw : Subject ] Signed-off-by: Rafael J. Wysocki

Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"

2014-10-29T15:48:33Z

It is reported that the following commit breaks Samsung hardware: Commit: 558e4736f2e1b0e6323adf7a5e4df77ed6cfc1a4. Subject: ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC Which means the Samsung behavior conflicts with the Acer behavior. 1. Samsung may behave like: [ +event 1 ] SCI_EVT set [ +event 2 ] SCI_EVT set write QR_EC read event [ -event 1 ] SCI_EVT clear Without the above commit, Samsung can work: [ +event 1 ] SCI_EVT set [ +event 2 ] SCI_EVT set write QR_EC CAN prepare next QR_EC as SCI_EVT=1 read event [ -event 1 ] SCI_EVT clear write QR_EC read event [ -event 2 ] SCI_EVT clear With the above commit, Samsung cannot work: [ +event 1 ] SCI_EVT set [ +event 2 ] SCI_EVT set write QR_EC read event [ -event 1 ] SCI_EVT clear CANNOT prepare next QR_EC as SCI_EVT=0 2. Acer may behave like: [ +event 1 ] SCI_EVT set [ +event 2 ] write QR_EC read event [ -event 1 ] SCI_EVT clear [ +event 2 ] SCI_EVT set Without the above commit, Acer cannot work when there is only 1 event: [ +event 1 ] SCI_EVT set write QR_EC can prepared next QR_EC as SCI_EVT=1 read event [ -event 1 ] SCI_EVT clear CANNOT write QR_EC as SCI_EVT=0 With the above commit, Acer can work: [ +event 1 ] SCI_EVT set [ +event 2 ] write QR_EC read event [ -event 1 ] SCI_EVT set can prepare next QR_EC because SCI_EVT=0 CAN write QR_EC as SCI_EVT=1 Since Acer can also work with only the following commit applied: Commit: 3afcf2ece453e1a8c2c6de19cdf06da3772a1b08 Subject: ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set commit 558e4736f2e1b0e6323adf7a5e4df77ed6cfc1a4 can be reverted. Fixes: 558e4736f2e1 (ACPI / EC: Add support to disallow QR_EC to be issued ...) Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161 Reported-and-tested-by: Ortwin Glück Signed-off-by: Lv Zheng Cc: 3.17+ # 3.17+ Signed-off-by: Rafael J. Wysocki

ACPI: Use ACPI companion to match only the first physical device

2014-10-27T17:41:46Z

Commit 6ab3430129e2 ("mfd: Add ACPI support") made the MFD subdevices share the parent MFD ACPI companion if no _HID/_CID is specified for the subdevice in mfd_cell description. However, since all the subdevices share the ACPI companion, the match and modalias generation logic started to use the ACPI companion as well resulting this: # cat /sys/bus/platform/devices/HID-SENSOR-200041.6.auto/modalias acpi:INT33D1:PNP0C50: instead of the expected one # cat /sys/bus/platform/devices/HID-SENSOR-200041.6.auto/modalias platform:HID-SENSOR-200041 In other words the subdevice modalias is overwritten by the one taken from ACPI companion. This causes udev not to load the driver anymore. It is useful to be able to share the ACPI companion so that MFD subdevices (and possibly other devices as well) can access the ACPI resources even if they do not have ACPI representation in the namespace themselves. An example where this is used is Minnowboard LPC driver that creates GPIO as a subdevice among other things. Without the ACPI companion gpiolib is not able to lookup the corresponding GPIO controller from ACPI GpioIo resource. To fix this, restrict the match and modalias logic to be limited to the first (primary) physical device associated with the given ACPI comapnion. The secondary devices will still be able to access the ACPI companion, but they will be matched in a different way. Fixes: 6ab3430129e2 (mfd: Add ACPI support) Reported-by: Jarkko Nikula Signed-off-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

Merge tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2014-10-24T18:29:31Z

Pull ACPI and power management updates from Rafael Wysocki: "This is material that didn't make it to my 3.18-rc1 pull request for various reasons, mostly related to timing and travel (LinuxCon EU / LPC) plus a couple of fixes for recent bugs. The only really new thing here is the PM QoS class for memory bandwidth, but it is simple enough and users of it will be added in the next cycle. One major change in behavior is that platform devices enumerated by ACPI will use 32-bit DMA mask by default. Also included is an ACPICA update to a new upstream release, but that's mostly cleanups, changes in tools and similar. The rest is fixes and cleanups mostly. Specifics: - Fix for a recent PCI power management change that overlooked the fact that some IRQ chips might not be able to configure PCIe PME for system wakeup from Lucas Stach. - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is called with a wrong ordering of arguments from Zhang Rui. - A bunch of intel_pstate driver fixes (all -stable candidates) from Dirk Brandewie, Gabriele Mazzotta and Pali Rohár. - Fixes for a rather long-standing problem with the OOM killer and the freezer that frozen processes killed by the OOM do not actually release any memory until they are thawed, so OOM-killing them is rather pointless, with a couple of cleanups on top (Michal Hocko, Cong Wang, Rafael J Wysocki). - ACPICA update to upstream release 20140926, inlcuding mostly cleanups reducing differences between the upstream ACPICA and the kernel code, tools changes (acpidump, acpiexec) and support for the _DDN object (Bob Moore, Lv Zheng). - New PM QoS class for memory bandwidth from Tomeu Vizoso. - Default 32-bit DMA mask for platform devices enumerated by ACPI (this change is mostly needed for some drivers development in progress targeted at 3.19) from Heikki Krogerus. - ACPI EC driver cleanups, mostly related to debugging, from Lv Zheng. - cpufreq-dt driver updates from Thomas Petazzoni. - powernv cpuidle driver update from Preeti U Murthy" * tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) intel_pstate: Correct BYT VID values. intel_pstate: Fix BYT frequency reporting intel_pstate: Don't lose sysfs settings during cpu offline cpufreq: intel_pstate: Reflect current no_turbo state correctly cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy PCI / PM: handle failure to enable wakeup on PCIe PME ACPI: invoke acpi_device_wakeup() with correct parameters PM / freezer: Clean up code after recent fixes PM: convert do_each_thread to for_each_process_thread OOM, PM: OOM killed task shouldn't escape PM suspend freezer: remove obsolete comments in __thaw_task() freezer: Do not freeze tasks killed by OOM killer ACPI / platform: provide default DMA mask cpuidle: powernv: Populate cpuidle state details by querying the device-tree cpufreq: cpufreq-dt: adjust message related to regulators cpufreq: cpufreq-dt: extend with platform_data cpufreq: allow driver-specific data ACPI / EC: Cleanup coding style. ACPI / EC: Refine event/query debugging messages. ...

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2014-10-24T18:21:43Z

Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...