linux/drivers/acpi, branch v4.0

cpuidle: ACPI: do not overwrite name and description of C0

2015-04-03T11:18:25Z

Fix a bug that leads to showing the name and description of C-state C0 as "" in sysfs after the ACPI C-states changed (e.g. after AC->DC or DC->AC transition). The function poll_idle_init() in drivers/cpuidle/driver.c initializes the state 0 during cpuidle_register_driver(), so we better do not overwrite it again with '\0' during acpi_processor_cst_has_changed(). Signed-off-by: Thomas Schlichter Reviewed-by: Bartlomiej Zolnierkiewicz Cc: 3.13+ # 3.13+ Signed-off-by: Rafael J. Wysocki

Revert "x86/PCI: Refine the way to release PCI IRQ resources"

2015-03-20T13:56:19Z

Commit b4b55cda5874 (Refine the way to release PCI IRQ resources) introduced a regression in the PCI IRQ resource management by causing the IRQ resource of a device, established when pci_enabled_device() is called on a fully disabled device, to be released when the driver is unbound from the device, regardless of the enable_cnt. This leads to the situation that an ill-behaved driver can now make a device unusable to subsequent drivers by an imbalance in their use of pci_enable/disable_device(). That is a serious problem for secondary drivers like vfio-pci, which are innocent of the transgressions of the previous driver. Since the solution of this problem is not immediate and requires further discussion, revert commit b4b55cda5874 and the issue it was supposed to address (a bug related to xen-pciback) will be taken care of in a different way going forward. Reported-by: Alex Williamson Signed-off-by: Rafael J. Wysocki

ACPI / LPSS: provide con_id for the clkdev

2015-03-09T23:28:43Z

Commit 7d78cbefaa (serial: 8250_dw: add ability to handle the peripheral clock) introduces handling for a second clk to 8250_dw.c which is the driver also for LPSS UART. The second clk forces us to provide identifier (con_id) for the clkdev we create. This fixes an issue where 8250_dw.c is getting the same handler for both clocks. Fixes: 7d78cbefaa (serial: 8250_dw: add ability to handle the peripheral clock) Signed-off-by: Heikki Krogerus Cc: 3.17+ # 3.17+ Signed-off-by: Rafael J. Wysocki

Merge branch 'acpi-video'

2015-03-06T00:29:16Z

* acpi-video: ACPI / video: Propagate the error code for acpi_video_register ACPI / video: Load the module even if ACPI is disabled

ACPI / video: Propagate the error code for acpi_video_register

2015-03-04T14:10:36Z

Report the actual error code from acpi_bus_register_driver(), it may help future debugging (typically ENODEV as previously reported, but the unusual cases are where it may help most). Signed-off-by: Chris Wilson Acked-by: Aaron Lu Signed-off-by: Rafael J. Wysocki

ACPI / video: Load the module even if ACPI is disabled

2015-03-04T14:10:36Z

i915.ko depends upon the acpi/video.ko module and so refuses to load if ACPI is disabled at runtime if for example the BIOS is broken beyond repair. acpi/video provides an optional service for i915.ko and so we should just allow the modules to load, but do no nothing in order to let the machines boot correctly. Reported-by: Bill Augur Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Jani Nikula Cc: All applicable Acked-by: Aaron Lu [ rjw: Fixed up the new comment in acpi_video_init() ] Signed-off-by: Rafael J. Wysocki

x86/PCI/ACPI: Relax ACPI resource descriptor checks to work around BIOS bugs

2015-03-04T13:09:50Z

Some BIOSes report incorrect length for ACPI address space descriptors, so relax the checks to avoid regressions. This issue has appeared several times as: 3162b6f0c5e1 ("PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1") d558b483d5a7 ("x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1") f238b414a74a ("PNPACPI: compute Address Space length rather than using _LEN") 48728e077480 ("x86/PCI: compute Address Space length rather than using _LEN") Please refer to https://bugzilla.kernel.org/show_bug.cgi?id=94221 for more details and example malformed ACPI resource descriptors. Link: https://bugzilla.kernel.org/show_bug.cgi?id=94221 Fixes: 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: Jiang Liu Tested-by: Dave Airlie Tested-by: Prakash Punnoor Signed-off-by: Rafael J. Wysocki

Merge tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2015-02-21T21:40:41Z

Pull one more batch of power management and ACPI updates from Rafael Wysocki: "These are mostly fixes on top of the previously merged recent PM and ACPI material. First, one commit that broke the ACPI LPSS (Low-Power Subsystem) driver on a Dell box is reverted and there are two stable-candidate fixes for that driver. Another fix cleans up two recently added ACPI EC messages that look odd and the printk level of a noisy debug message in the core ACPI resources handling code is reduced. In addition to that we have two stable-candidate fixes for the s3c cpufreq driver, two cpuidle powernv driver updates related to Device Trees and a PNP subsystem cleanup that will allow us to get rid of some old ugliness going forward. Also there is a new blacklist entry for the ACPI backlight code. Specifics: - Revert a recent ACPI LPSS driver commit that prevented the touchpad driver from loading on Dell XPS13 (Jarkko Nikula). - Make the ACPI LPSS driver disable the I2C controllers and deassert SPI host controllers resets at startup on Intel BayTrail and Braswell SoCs in case they have been left in wrong states by the platform firmware which then may casuse fatal controller driver failures during resume from hibernation (Mika Westerberg). - Make two recently added ACPI EC messages look better (Scot Doyle). - Reduce the printk level of a recently added debug message related to ACPI resources that may become noisy in some cases (Rafael J Wysocki). - Add a new ACPI backlight blacklist entry for Samsung Series 9 (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native backlight interface doesn't work while the ACPI based one does (Jens Reyer). - Make the PNP sybsystem's core code use __request_region() followed by __release_region() instead of __check_region() which then will allow us to get rid of the latter as it has no more users (Jakub Sitnicki). - Fix a build breakage and an issue with two __init functions that may be called after initialization in the s3c cpufreq driver (Arnd Bergmann). - Make the powernv cpuidle driver read target_residency values for idle states from a Device Tree (as we have the suitable DT bindings for that now) and improve the parsing of the powermgmt DT node in that driver (Preeti U Murthy)" * tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: powernv: Avoid endianness conversions while parsing DT cpufreq: s3c: remove last use of resume_clocks callback cpufreq: s3c: remove incorrect __init annotations ACPI / LPSS: Deassert resets for SPI host controllers on Braswell ACPI / LPSS: Always disable I2C host controllers ACPI / resources: Change pr_info() to pr_debug() for debug information ACPI / video: Disable native backlight on Samsung Series 9 laptops cpuidle: powernv: Read target_residency value of idle states from DT if available Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C" ACPI / EC: Remove non-standard log emphasis PNP: Switch from __check_region() to __request_region()

Merge branches 'acpi-ec', 'acpi-soc', 'acpi-video' and 'acpi-resources'

2015-02-21T03:28:56Z

* acpi-ec: ACPI / EC: Remove non-standard log emphasis * acpi-soc: ACPI / LPSS: Deassert resets for SPI host controllers on Braswell ACPI / LPSS: Always disable I2C host controllers Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C" * acpi-video: ACPI / video: Disable native backlight on Samsung Series 9 laptops * acpi-resources: ACPI / resources: Change pr_info() to pr_debug() for debug information

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2015-02-19T19:28:36Z

Pull thermal managament updates from Zhang Rui: "Specifics: - Abstract the code and introduce helper functions for all int340x thermal drivers. From: Srinivas Pandruvada. - Reorganize the ACPI LPAT table support code so that it can be shared for both ACPI PMIC driver and int340x thermal driver. - Add support for Braswell in intel_soc_dts thermal driver. - a couple of small fixes/cleanups for step_wise governor and int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal/int340x_thermal: remove unused uuids. thermal: step_wise: spelling fixes thermal: int340x: fix sparse warning Thermal/int340x: LPAT conversion for temperature ACPI / PMIC: Use common LPAT table handling functions ACPI / LPAT: Common table processing functions thermal: Intel SoC DTS: Add Braswell support Thermal/int340x/int3402: Provide notification support Thermal/int340x/processor_thermal: Add thermal zone support Thermal/int340x/int3403: Use int340x thermal API Thermal/int340x/int3402: Use int340x thermal API Thermal/int340x: Add common thermal zone handler