linux/drivers/amba, branch v5.17

ARM: 9163/1: amba: Move of_amba_device_decode_irq() into amba_probe()

2021-12-17T11:34:35Z

Similar to other resources the AMBA bus "gets" for the device, move irq obtain from amba_device_add() to amba_probe(). Signed-off-by: Kefeng Wang Signed-off-by: Russell King (Oracle)

ARM: 9162/1: amba: Kill sysfs attribute file of irq

2021-12-17T11:34:34Z

As Rob said[1], there doesn't seem to be any users about the sysfs attribute file of irq[0] and irq[1]. And we don't need to include as NO_IRQ has gone. Let's kill both of them. [1] https://lkml.org/lkml/2021/8/25/461 Acked-by: Rob Herring Signed-off-by: Kefeng Wang Signed-off-by: Russell King (Oracle)

ARM: 9119/1: amba: Properly handle device probe without IRQ domain

2021-10-19T09:30:53Z

of_amba_device_create() uses irq_of_parse_and_map() to translate a DT interrupt specification into a Linux virtual interrupt number. But it doesn't properly handle the case where the interrupt controller is not yet available, eg, when pl011 interrupt is connected to MBIGEN interrupt controller, because the mbigen initialization is too late, which will lead to no IRQ due to no IRQ domain found, log is shown below, "irq: no irq domain found for uart0 !" use of_irq_get() to return -EPROBE_DEFER as above, and in the function amba_device_try_add()/amba_device_add(), it will properly handle in such case, also return 0 in other fail cases to be consistent as before. Cc: Rob Herring Cc: Frank Rowand Reported-by: Ruizhe Lin Reviewed-by: Rob Herring Signed-off-by: Kefeng Wang Signed-off-by: Russell King (Oracle)

ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"

2021-10-19T09:30:52Z

After commit 77a7300abad7 ("of/irq: Get rid of NO_IRQ usage"), no irq case has been removed, irq_of_parse_and_map() will return 0 in all cases when get error from parse and map an interrupt into linux virq space. amba_device_register() is only used on no-DT initialization, see s3c64xx_pl080_init() arch/arm/mach-s3c/pl080.c ep93xx_init_devices() arch/arm/mach-ep93xx/core.c They won't set -1 to irq[0], so no need the warn. This reverts commit 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3. Reviewed-by: Rob Herring Signed-off-by: Kefeng Wang Signed-off-by: Russell King (Oracle)

ARM: 9121/1: amba: Drop unused functions about APB/AHB devices add

2021-10-19T09:30:51Z

No one use the following functions, kill them. amba_aphb_device_add() amba_apb_device_add() amba_apb_device_add_res() amba_ahb_device_add() amba_ahb_device_add_res() Cc: Linus Walleij Reviewed-by: Rob Herring Signed-off-by: Kefeng Wang Signed-off-by: Russell King (Oracle)

bus: Make remove callback return void

2021-07-21T09:53:42Z

The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix (For fpga) Reviewed-by: Mathieu Poirier Reviewed-by: Cornelia Huck (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) (For ARM, Amba and related parts) Acked-by: Mark Brown Acked-by: Chen-Yu Tsai (for sunxi-rsb) Acked-by: Pali Rohár Acked-by: Mauro Carvalho Chehab (for media) Acked-by: Hans de Goede (For drivers/platform) Acked-by: Alexandre Belloni Acked-By: Vinod Koul Acked-by: Juergen Gross (For xen) Acked-by: Lee Jones (For mfd) Acked-by: Johannes Thumshirn (For mcb) Acked-by: Johan Hovold Acked-by: Srinivas Kandagatla (For slimbus) Acked-by: Kirti Wankhede (For vfio) Acked-by: Maximilian Luz Acked-by: Heikki Krogerus (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez (For ipack) Acked-by: Geoff Levand (For ps3) Acked-by: Yehezkel Bernat (For thunderbolt) Acked-by: Alexander Shishkin (For intel_th) Acked-by: Dominik Brodowski (For pcmcia) Acked-by: Rafael J. Wysocki (For ACPI) Acked-by: Bjorn Andersson (rpmsg and apr) Acked-by: Srinivas Pandruvada (For intel-ish-hid) Acked-by: Dan Williams (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray (For isa) Acked-by: Stefan Richter (For firewire) Acked-by: Benjamin Tissoires (For hid) Acked-by: Thorsten Scherer (For siox) Acked-by: Sven Van Asbroeck (For anybuss) Acked-by: Ulf Hansson (For MMC) Acked-by: Wolfram Sang # for I2C Acked-by: Sudeep Holla Acked-by: Geert Uytterhoeven Acked-by: Dmitry Torokhov Acked-by: Finn Thain Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

amba: Make use of bus_type functions

2021-02-02T13:26:02Z

Instead of assigning the needed functions for each driver separately do it only once in amba_bustype. Move the definition of the functions to their proper place among the other callbacks used there. Note that the bus's shutdown function might be called for unbound devices, too, so it needs additional guarding. This prepares getting rid of these callbacks in struct device_driver. Reviewed-by: Ulf Hansson Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210126165835.687514-6-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König

amba: Make the remove callback return void

2021-02-02T13:25:50Z

All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson Reviewed-by: Arnd Bergmann Acked-by: Alexandre Belloni Acked-by: Dmitry Torokhov Acked-by: Krzysztof Kozlowski # for drivers/memory Acked-by: Mark Brown Acked-by: Linus Walleij Acked-by: Suzuki K Poulose # for hwtracing/coresight Acked-By: Vinod Koul # for dmaengine Acked-by: Guenter Roeck # for watchdog Acked-by: Wolfram Sang # for I2C Acked-by: Takashi Iwai # for sound Acked-by: Vladimir Zapolskiy # for memory/pl172 Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König

amba: reorder functions

2021-02-02T13:24:20Z

Put helpers (here: amba_get_enable_pclk and amba_put_disable_pclk) at the top of the file and then define callbacks directly before the structs they are used in; in the same order. Reviewed-by: Ulf Hansson Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210126165835.687514-3-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König

amba: Fix resource leak for drivers without .remove

2021-02-02T13:24:10Z

Consider an amba driver with a .probe but without a .remove callback (e.g. pl061_gpio_driver). The function amba_probe() is called to bind a device and so dev_pm_domain_attach() and others are called. As there is no remove callback amba_remove() isn't called at unbind time however and so calling dev_pm_domain_detach() is missed and the pm domain keeps active. To fix this always use the core driver callbacks and handle missing amba callbacks there. For probe refuse registration as a driver without probe doesn't make sense. Fixes: 7cfe249475fd ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") Reviewed-by: Ulf Hansson Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König