linux/drivers/ata, branch v4.11

sata_via: Enable hotplug only on VT6421

2017-04-11T00:12:18Z

Commit 57e5568fda27 ("sata_via: Implement hotplug for VT6421") adds hotplug IRQ handler for VT6421 but enables hotplug on all chips. This is a bug because it causes "irq xx: nobody cared" error on VT6420 when hot-(un)plugging a drive: [ 381.839948] irq 20: nobody cared (try booting with the "irqpoll" option) [ 381.840014] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc5+ #148 [ 381.840066] Hardware name: P4VM800/P4VM800, BIOS P1.60 05/29/2006 [ 381.840117] Call Trace: [ 381.840167] [ 381.840225] ? dump_stack+0x44/0x58 [ 381.840278] ? __report_bad_irq+0x14/0x97 [ 381.840327] ? handle_edge_irq+0xa5/0xa5 [ 381.840376] ? note_interrupt+0x155/0x1cf [ 381.840426] ? handle_edge_irq+0xa5/0xa5 [ 381.840474] ? handle_irq_event_percpu+0x32/0x38 [ 381.840524] ? handle_irq_event+0x1f/0x38 [ 381.840573] ? handle_fasteoi_irq+0x69/0xb8 [ 381.840625] ? handle_irq+0x4f/0x5d [ 381.840672] [ 381.840726] ? do_IRQ+0x2e/0x8b [ 381.840782] ? common_interrupt+0x2c/0x34 [ 381.840836] ? mwait_idle+0x60/0x82 [ 381.840892] ? arch_cpu_idle+0x6/0x7 [ 381.840949] ? do_idle+0x96/0x18e [ 381.841002] ? cpu_startup_entry+0x16/0x1a [ 381.841057] ? start_kernel+0x319/0x31c [ 381.841111] ? startup_32_smp+0x166/0x168 [ 381.841165] handlers: [ 381.841219] [] ata_bmdma_interrupt [ 381.841274] Disabling IRQ #20 Seems that VT6420 can do hotplug too (there's no documentation) but the comments say that SCR register access (required for detecting hotplug events) can cause problems on these chips. For now, just keep hotplug disabled on anything other than VT6421. Signed-off-by: Ondrej Zary Signed-off-by: Tejun Heo

Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700"

2017-03-27T17:52:00Z

This reverts commit 5946fdaee4ba449e8fbb5d403e1ed69437f916e8. The original commit's assumption that the secondary port is unconnected turns out to be false. Signed-off-by: Tejun Heo Reported-by: Markku Pesonen Fixes: 5946fdaee4ba ("pata_atiixp: Don't use unconnected secondary port on SB600/SB700") Cc: Darren Stevens

ahci: qoriq: correct the sata ecc setting error

2017-03-09T16:55:23Z

Sata ecc is controlled by only 1 bit which is 24bit in big-endian in ecc register. So only setting 24bit to disable sata ecc prevents other bits from being overwritten in ecc register. Signed-off-by: Tang Yuantian Signed-off-by: Tejun Heo

libata: drop WARN from protocol error in ata_sff_qc_issue()

2017-03-06T20:26:54Z

ata_sff_qc_issue() expects upper layers to never issue commands on a command protocol that it doesn't implement. While the assumption holds fine with the usual IO path, nothing filters based on the command protocol in the passthrough path (which was added later), allowing the warning to be tripped with a passthrough command with the right (well, wrong) protocol. Failing with AC_ERR_SYSTEM is the right thing to do anyway. Remove the unnecessary WARN. Reported-by: Dmitry Vyukov Link: http://lkml.kernel.org/r/CACT4Y+bXkvevNZU8uP6X0QVqsj6wNoUA_1exfTSOzc+SmUtMOA@mail.gmail.com Signed-off-by: Tejun Heo

libata: transport: Remove circular dependency at free time

2017-03-06T20:24:48Z

Without this patch, failed probe would not free resources like irq. ata port tdev object currently hold a reference to the ata port object. Therefore the ata port object release function will not get called until the ata_tport_release is called. But that would never happen, releasing the last reference of ata port dev is done by scsi_host_release, which is called by ata_host_release when the ata port object is released. The ata device objects actually do not need to explicitly hold a reference to their real counterpart, given the transport objects are the children of these objects and device_add() is call for each child. We know the parent will not be deleted until we call the child's device_del(). Reported-by: Matthew Whitehead Tested-by: Matthew Whitehead Suggested-by: Tejun Heo Signed-off-by: Gwendal Grignou Signed-off-by: Tejun Heo

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-03-04T05:36:56Z

Pull more SCSI updates from James Bottomley: "This is the set of stuff that didn't quite make the initial pull and a set of fixes for stuff which did. The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes cover a lot of previously submitted stuff, the most important of which probably covers some of the failing irq vectors allocation and other fallout from having the SCSI command allocated as part of the block allocation functions" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits) scsi: qedi: Fix memory leak in tmf response processing. scsi: aacraid: remove redundant zero check on ret scsi: lpfc: use proper format string for dma_addr_t scsi: lpfc: use div_u64 for 64-bit division scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m scsi: cciss: correct check map error. scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator" scsi: aacraid: Fixed expander hotplug for SMART family scsi: mpt3sas: switch to pci_alloc_irq_vectors scsi: qedf: fixup compilation warning about atomic_t usage scsi: remove scsi_execute_req_flags scsi: merge __scsi_execute into scsi_execute scsi: simplify scsi_execute_req_flags scsi: make the sense header argument to scsi_test_unit_ready mandatory scsi: sd: improve TUR handling in sd_check_events scsi: always zero sshdr in scsi_normalize_sense scsi: scsi_dh_emc: return success in clariion_std_inquiry() scsi: fix memory leak of sdpk on when gd fails to allocate scsi: sd: make sd_devt_release() static scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework. ...

scripts/spelling.txt: add "followings" pattern and fix typo instances

2017-02-28T02:43:47Z

Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-02-23T23:57:04Z

Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ...

scsi: merge __scsi_execute into scsi_execute

2017-02-23T21:57:19Z

All but one caller want the decoded sense header, so offer the existing __scsi_execute helper as the public scsi_execute API to simply the callers. Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2017-02-22T01:21:32Z

Pull libata updates from Tejun Heo: - Bartlomiej added pata_falcon - Christoph is trying to remove use of static 4k buf. It's still WIP - config cleanup around HAS_DMA - other fixes and driver-specific changes * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits) ata: pata_of_platform: using of_property_read_u32() helper pata_atiixp: Don't use unconnected secondary port on SB600/SB700 libata-sff: Don't scan disabled ports when checking for legacy mode. pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode() ahci: qoriq: added ls2088a platforms support ahci: qoriq: report error when ecc register address is missing in dts ahci: qoriq: added a condition to enable dma coherence Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf" ahci: imx: fix building without hwmon or thermal ata: add Atari Falcon PATA controller driver ata: pass queued command to ->sff_data_xfer method ata: allow subsystem to be used on m68k arch libata: switch to dynamic allocation instead of ata_scsi_rbuf libata: don't call ata_scsi_rbuf_fill for command without a response buffer libata: call ->scsi_done from ata_scsi_simulate libata: remove the done callback from ata_scsi_args libata: move struct ata_scsi_args to libata-scsi.c libata: avoid global response buffer in atapi_qc_complete libata-eh: Use switch() instead of sparse array for protocol strings ata: sata_mv: Convert to devm_ioremap_resource() ...