linux/drivers/base/core.c, branch v5.19

PM: runtime: Fix supplier device management during consumer probe

2022-07-01T19:04:15Z

Because pm_runtime_get_suppliers() bumps up the rpm_active counter of each device link to a supplier of the given device in addition to bumping up the supplier's PM-runtime usage counter, a runtime suspend of the consumer device may case the latter to go down to 0 when pm_runtime_put_suppliers() is running on a remote CPU. If that happens after pm_runtime_put_suppliers() has released power.lock for the consumer device, and a runtime resume of that device takes place immediately after it, before pm_runtime_put() is called for the supplier, that pm_runtime_put() call may cause the supplier to be suspended even though the consumer is active. To prevent that from happening, modify pm_runtime_get_suppliers() to call pm_runtime_get_sync() for the given device's suppliers without touching the rpm_active counters of the involved device links Accordingly, modify pm_runtime_put_suppliers() to call pm_runtime_put() for the given device's suppliers without looking at the rpm_active counters of the device links at hand. [This is analogous to what happened before commit 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance").] Since pm_runtime_get_suppliers() sets supplier_preactivated for each device link where the supplier's PM-runtime usage counter has been incremented and pm_runtime_put_suppliers() calls pm_runtime_put() for the suppliers whose device links have supplier_preactivated set, the PM-runtime usage counter is balanced for each supplier and this is independent of the runtime suspend and resume of the consumer device. However, in case a device link with DL_FLAG_PM_RUNTIME set is dropped during the consumer device probe, so pm_runtime_get_suppliers() bumps up the supplier's PM-runtime usage counter, but it cannot be dropped by pm_runtime_put_suppliers(), make device_link_release_fn() take care of that. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Reported-by: Peter Wang Signed-off-by: Rafael J. Wysocki Reviewed-by: Greg Kroah-Hartman Reviewed-by: Peter Wang Cc: 5.1+ # 5.1+

PM: runtime: Redefine pm_runtime_release_supplier()

2022-07-01T19:04:02Z

Instead of passing an extra bool argument to pm_runtime_release_supplier(), make its callers take care of triggering a runtime-suspend of the supplier device as needed. No expected functional impact. Suggested-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki Reviewed-by: Greg Kroah-Hartman Cc: 5.1+ # 5.1+

Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-06-03T18:48:47Z

Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ...

device-core: Kill the lockdep_mutex

2022-04-28T21:01:55Z

Per Peter [1], the lockdep API has native support for all the use cases lockdep_mutex was attempting to enable. Now that all lockdep_mutex users have been converted to those APIs, drop this lock. Link: https://lore.kernel.org/r/Ylf0dewci8myLvoW@hirez.programming.kicks-ass.net [1] Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Suggested-by: Peter Zijlstra Reviewed-by: Ira Weiny Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/165055522548.3745911.14298368286915484086.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams

driver core: Add sysfs support for physical location of a device

2022-04-27T07:51:57Z

When ACPI table includes _PLD fields for a device, create a new directory (physical_location) in sysfs to share _PLD fields. Currently without PLD information, when there are multiple of same devices, it is hard to distinguish which device corresponds to which physical device at which location. For example, when there are two Type C connectors, it is hard to find out which connector corresponds to the Type C port on the left panel versus the Type C port on the right panel. With PLD information provided, we can determine which specific device at which location is doing what. _PLD output includes much more fields, but only generic fields are added and exposed to sysfs, so that non-ACPI devices can also support it in the future. The minimal generic fields needed for locating a device are the following. - panel - vertical_position - horizontal_position - dock - lid Signed-off-by: Won Chung Link: https://lore.kernel.org/r/20220314195458.271430-1-wonchung@google.com Signed-off-by: Greg Kroah-Hartman

block: remove genhd.h

2022-02-02T14:49:59Z

There is no good reason to keep genhd.h separate from the main blkdev.h header that includes it. So fold the contents of genhd.h into blkdev.h and remove genhd.h entirely. Signed-off-by: Christoph Hellwig Reviewed-by: Chaitanya Kulkarni Reviewed-by: Martin K. Petersen Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de Signed-off-by: Jens Axboe

Merge tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2022-01-13T17:05:29Z

Pull MSI irq updates from Thomas Gleixner: "Rework of the MSI interrupt infrastructure. This is a treewide cleanup and consolidation of MSI interrupt handling in preparation for further changes in this area which are necessary to: - address existing shortcomings in the VFIO area - support the upcoming Interrupt Message Store functionality which decouples the message store from the PCI config/MMIO space" * tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) genirq/msi: Populate sysfs entry only once PCI/MSI: Unbreak pci_irq_get_affinity() genirq/msi: Convert storage to xarray genirq/msi: Simplify sysfs handling genirq/msi: Add abuse prevention comment to msi header genirq/msi: Mop up old interfaces genirq/msi: Convert to new functions genirq/msi: Make interrupt allocation less convoluted platform-msi: Simplify platform device MSI code platform-msi: Let core code handle MSI descriptors bus: fsl-mc-msi: Simplify MSI descriptor handling soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs() soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation NTB/msi: Convert to msi_on_each_desc() PCI: hv: Rework MSI handling powerpc/mpic_u3msi: Use msi_for_each-desc() powerpc/fsl_msi: Use msi_for_each_desc() powerpc/pasemi/msi: Convert to msi_on_each_dec() powerpc/cell/axon_msi: Convert to msi_on_each_desc() powerpc/4xx/hsta: Rework MSI handling ...

Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-01-12T19:11:34Z

Pull driver core updates from Greg KH: "Here is the set of changes for the driver core for 5.17-rc1. Lots of little things here, including: - kobj_type cleanups - auxiliary_bus documentation updates - auxiliary_device conversions for some drivers (relevant subsystems all have provided acks for these) - kernfs lock contention reduction for some workloads - other tiny cleanups and changes. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits) kobject documentation: remove default_attrs information drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb debugfs: lockdown: Allow reading debugfs files that are not world readable driver core: Make bus notifiers in right order in really_probe() driver core: Move driver_sysfs_remove() after driver_sysfs_add() firmware: edd: remove empty default_attrs array firmware: dmi-sysfs: use default_groups in kobj_type qemu_fw_cfg: use default_groups in kobj_type firmware: memmap: use default_groups in kobj_type sh: sq: use default_groups in kobj_type headers/uninline: Uninline single-use function: kobject_has_children() devtmpfs: mount with noexec and nosuid driver core: Simplify async probe test code by using ktime_ms_delta() nilfs2: use default_groups in kobj_type kobject: remove kset from struct kset_uevent_ops callbacks driver core: make kobj_type constant. driver core: platform: document registration-failure requirement vdpa/mlx5: Use auxiliary_device driver data helpers net/mlx5e: Use auxiliary_device driver data helpers soundwire: intel: Use auxiliary_device driver data helpers ...

Merge tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-01-11T04:48:19Z

Pull device properties framework updates from Rafael Wysocki: "These update the handling of software nodes and graph properties, and the MAINTAINERS entry for the former. Specifics: - Remove device_add_properties() which does not work correctly if software nodes holding additional device properties are shared or reused (Heikki Krogerus). - Fix nargs_prop property handling for software nodes (Clément Léger). - Update documentation of ACPI device properties (Sakari Ailus). - Update the handling of graph properties in the generic framework to match the DT case (Sakari Ailus). - Update software nodes entry in MAINTAINERS (Andy Shevchenko)" * tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: software node: Update MAINTAINERS data base software node: fix wrong node passed to find nargs_prop device property: Drop fwnode_graph_get_remote_node() device property: Use fwnode_graph_for_each_endpoint() macro device property: Implement fwnode_graph_get_endpoint_count() Documentation: ACPI: Update references Documentation: ACPI: Fix data node reference documentation device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED device property: Fix fwnode_graph_devcon_match() fwnode leak device property: Remove device_add_properties() API driver core: Don't call device_remove_properties() from device_del() PCI: Convert to device_create_managed_software_node()

headers/uninline: Uninline single-use function: kobject_has_children()

2022-01-04T13:36:06Z

This was the only usage of in , so we'll able to decouple the two after this change. Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman