linux/drivers/base/power, branch v4.3

PM / Domains: Fix validation of latency constraints in genpd governor

2015-10-14T00:34:43Z

Commit ba2bbfbf6307 (PM / Domains: Remove intermediate states from the power off sequence) changed the power off sequence in genpd. That also required some updates regarding the validation of latency constraints in the genpd governor. Unfortunate that wasn't covered, so let's fix this. From a runtime PM and latency point of view, we need to consider the worst case scenario while validating latency constraints. That's typically when a call to pm_runtime_get_sync() needs to wait for a ongoing runtime suspend operation to be carried out, as it then also needs to wait for the device to be runtime resumed again. The above mentioned commit made the genpd governor's ->stop_ok() callback responsible of validating genpd's device's runtime suspend/resume latency. In other words, the constraint needs to be validated towards the relevant latencies present in genpd's ->runtime_suspend|resume() callbacks. Earlier, that included latencies from the ->stop|start() callbacks, but as ->save|restore_state() are now also being invoked from genpd's ->runtime_suspend|resume() and to comply with the worst case scenario, let's take also those latencies into account. Fixes: ba2bbfbf6307 (PM / Domains: Remove intermediate states from the power off sequence) Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM / OPP: Fix typo modifcation -> modification

2015-09-25T21:09:57Z

Reported-by: Viresh Kumar Signed-off-by: Stephen Boyd Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

PM / OPP: of_property_count_u32_elems() can return errors

2015-09-25T00:35:54Z

of_property_count_u32_elems() will never return 0, but a -ve error value of a positive count. And so the current !count check is wrong. Also, a missing "opp-microvolt" property isn't a problem and so we need to do of_find_property() separately to confirm that. Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings) Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki

Merge branches 'pm-cpu', 'pm-cpuidle' and 'pm-domains'

2015-09-11T13:37:36Z

* pm-cpu: kernel/cpu_pm: fix cpu_cluster_pm_exit comment * pm-cpuidle: cpuidle/coupled: Add sanity check for safe_state_index * pm-domains: staging: board: Migrate away from __pm_genpd_name_add_device() PM / Domains: Ensure subdomain is not in use before removing PM / Domains: Try power off masters in error path of __pm_genpd_poweron()

Merge branch 'pm-opp'

2015-09-11T13:37:17Z

* pm-opp: PM / OPP: Return suspend_opp only if it is enabled PM / OPP: add dev_pm_opp_get_suspend_opp() helper

PM / OPP: Return suspend_opp only if it is enabled

2015-09-09T20:53:37Z

There is no point returning suspend_opp, if it is disabled by the core. As we can't use it at all. Fix it. Fixes: 4eafbd15b6c8 ("PM / OPP: add dev_pm_opp_get_suspend_opp() helper") Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

PM / OPP: add dev_pm_opp_get_suspend_opp() helper

2015-09-09T00:20:39Z

Add dev_pm_opp_get_suspend_opp() helper to obtain suspend opp. Acked-by: Viresh Kumar Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Rafael J. Wysocki

PM / Domains: Ensure subdomain is not in use before removing

2015-09-05T01:33:19Z

The function pm_genpd_remove_subdomain() removes a subdomain from a generic PM domain, however, it does not check if the subdomain has any slave domains or device attached before doing so. Therefore, add a test to verify that the subdomain does not have any slave domains associated or any device attached before removing. Signed-off-by: Jon Hunter Acked-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki

PM / Domains: Try power off masters in error path of __pm_genpd_poweron()

2015-09-03T00:53:53Z

While powering up a genpd, its domain masters are first being powered up. In the error path of __pm_genpd_poweron(), we didn't care to try power off these domain masters. Let's deal with that to avoid leaving unused PM domains powered. Signed-off-by: Ulf Hansson Reviewed-by: Krzysztof Kozlowski Signed-off-by: Rafael J. Wysocki

Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2015-09-02T02:45:46Z

Pull power management and ACPI updates from Rafael Wysocki: "From the number of commits perspective, the biggest items are ACPICA and cpufreq changes with the latter taking the lead (over 50 commits). On the cpufreq front, there are many cleanups and minor fixes in the core and governors, driver updates etc. We also have a new cpufreq driver for Mediatek MT8173 chips. ACPICA mostly updates its debug infrastructure and adds a number of fixes and cleanups for a good measure. The Operating Performance Points (OPP) framework is updated with new DT bindings and support for them among other things. We have a few updates of the generic power domains framework and a reorganization of the ACPI device enumeration code and bus type operations. And a lot of fixes and cleanups all over. Included is one branch from the MFD tree as it contains some PM-related driver core and ACPI PM changes a few other commits are based on. Specifics: - ACPICA update to upstream revision 20150818 including method tracing extensions to allow more in-depth AML debugging in the kernel and a number of assorted fixes and cleanups (Bob Moore, Lv Zheng, Markus Elfring). - ACPI sysfs code updates and a documentation update related to AML method tracing (Lv Zheng). - ACPI EC driver fix related to serialized evaluations of _Qxx methods and ACPI tools updates allowing the EC userspace tool to be built from the kernel source (Lv Zheng). - ACPI processor driver updates preparing it for future introduction of CPPC support and ACPI PCC mailbox driver updates (Ashwin Chaugule). - ACPI interrupts enumeration fix for a regression related to the handling of IRQ attribute conflicts between MADT and the ACPI namespace (Jiang Liu). - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar). - ACPI device registration code reorganization to separate the sysfs-related code and bus type operations from the rest (Rafael J Wysocki). - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause, Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss). - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan Xinhui, Rafael J Wysocki). - cpufreq core cleanups on top of the previous changes allowing it to preseve its sysfs directories over system suspend/resume (Viresh Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior). - cpufreq fixes and cleanups related to governors (Viresh Kumar). - cpufreq updates (core and the cpufreq-dt driver) related to the turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz). - New DT bindings for Operating Performance Points (OPP), support for them in the OPP framework and in the cpufreq-dt driver plus related OPP framework fixes and cleanups (Viresh Kumar). - cpufreq powernv driver updates (Shilpasri G Bhat). - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen). - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean). - intel_pstate driver updates including Skylake-S support, support for enabling HW P-states per CPU and an additional vendor bypass list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao). - cpuidle core fixes related to the handling of coupled idle states (Xunlei Pang). - intel_idle driver updates including Skylake Client support and support for freeze-mode-specific idle states (Len Brown). - Driver core updates related to power management (Andy Shevchenko, Rafael J Wysocki). - Generic power domains framework fixes and cleanups (Jon Hunter, Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson). - Device PM QoS framework update to allow the latency tolerance setting to be exposed to user space via sysfs (Mika Westerberg). - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas). - System sleep support updates (Alan Stern, Len Brown, SungEun Kim). - rockchip-io AVS support updates (Heiko Stuebner). - PM core clocks support fixup (Colin Ian King). - Power capping RAPL driver update including support for Skylake H/S and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi). - Generic device properties framework fixes related to the handling of static (driver-provided) property sets (Andy Shevchenko). - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat, Shreyas B Prabhu)" * tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings PM / Domains: Fix typo in description of genpd_dev_pm_detach() PM / Domains: Remove unusable governor dummies PM / Domains: Make pm_genpd_init() available to modules PM / domains: Align column headers and data in pm_genpd_summary output powercap / RAPL: disable the 2nd power limit properly tools: cpupower: Fix error when running cpupower monitor PM / OPP: Drop unlikely before IS_ERR(_OR_NULL) PM / OPP: Fix static checker warning (broken 64bit big endian systems) ...