linux/drivers/base/power, branch v5.6

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T22:04:19Z

Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...

Merge tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2020-01-31T22:36:35Z

Pull more power manadement updates from Rafael Wysocki: "Prevent cpufreq from creating excessively large stack frames and fix the handling of devices deleted during system-wide resume in the PM core (Rafael Wysocki), revert a problematic commit affecting the cpupower utility and correct its man page (Thomas Renninger, Brahadambal Srinivasan), and improve the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility Correction to manpage of cpupower cpufreq: Avoid creating excessively large stack frames PM: core: Fix handling of devices deleted during system-wide resume cpupower: Revert library ABI changes from commit ae2917093fb60bdc1ed3e

Merge branches 'pm-cpufreq' and 'pm-core'

2020-01-31T09:28:23Z

* pm-cpufreq: cpufreq: Avoid creating excessively large stack frames * pm-core: PM: core: Fix handling of devices deleted during system-wide resume

Merge tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2020-01-29T23:25:34Z

Pull Kselftest kunit updates from Shuah Khan: "This kunit update consists of: - Support for building kunit as a module from Alan Maguire - AppArmor KUnit tests for policy unpack from Mike Salvatore" * tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: building kunit as a module breaks allmodconfig kunit: update documentation to describe module-based build kunit: allow kunit to be loaded as a module kunit: remove timeout dependence on sysctl_hung_task_timeout_seconds kunit: allow kunit tests to be loaded as a module kunit: hide unexported try-catch interface in try-catch-impl.h kunit: move string-stream.h to lib/kunit apparmor: add AppArmor KUnit tests for policy unpack

Merge branches 'pm-core', 'powercap', 'pm-opp', 'pm-avs' and 'pm-misc'

2020-01-27T10:30:13Z

* pm-core: PM-runtime: add tracepoints for usage_count changes * powercap: powercap/intel_rapl: add support for JasperLake x86/cpu: Add Jasper Lake to Intel family powercap/intel_rapl: add support for TigerLake Mobile * pm-opp: opp: Replace list_kref with a local counter opp: Free static OPPs on errors while adding them * pm-avs: power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static power: avs: qcom-cpr: remove set but unused variable power: avs: qcom-cpr: make sure that regmap is available power: avs: qcom-cpr: fix unsigned expression compared with zero power: avs: qcom-cpr: fix invalid printk specifier in debug print power: avs: Add support for CPR (Core Power Reduction) dt-bindings: power: avs: Add support for CPR (Core Power Reduction) * pm-misc: mailmap: Add entry for

PM: core: Fix handling of devices deleted during system-wide resume

2020-01-24T13:27:05Z

If a device is deleted by one of its system-wide resume callbacks (for example, because it does not appear to be present or accessible any more) along with its children, the resume of the children may continue leading to use-after-free errors and other issues (potentially). Namely, if the device's children are resumed asynchronously, their resume may have been scheduled already before the device's callback runs and so the device may be deleted while dpm_wait_for_superior() is being executed for them. The memory taken up by the parent device object may be freed then while dpm_wait() is waiting for the parent's resume callback to complete, which leads to a use-after-free. Moreover, the resume of the children is really not expected to continue after they have been unregistered, so it must be terminated right away in that case. To address this problem, modify dpm_wait_for_superior() to check if the target device is still there in the system-wide PM list of devices and if so, to increment its parent's reference counter, both under dpm_list_mtx which prevents device_del() running for the child from dropping the parent's reference counter prematurely. If the device is not present in the system-wide PM list of devices any more, the resume of it cannot continue, so check that again after dpm_wait() returns, which means that the parent's callback has been completed, and pass the result of that check to the caller of dpm_wait_for_superior() to allow it to abort the device's resume if it is not there any more. Link: https://lore.kernel.org/linux-pm/1579568452-27253-1-git-send-email-chanho.min@lge.com Reported-by: Chanho Min Cc: All applicable Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman

PM-runtime: add tracepoints for usage_count changes

2020-01-13T11:28:29Z

Add tracepoints to remaining places where device's power.usage_count is changed. This helps debugging where and why autosuspend is prevented. Signed-off-by: Michał Mirosław Signed-off-by: Rafael J. Wysocki

kunit: allow kunit tests to be loaded as a module

2020-01-09T23:42:29Z

As tests are added to kunit, it will become less feasible to execute all built tests together. By supporting modular tests we provide a simple way to do selective execution on a running system; specifying CONFIG_KUNIT=y CONFIG_KUNIT_EXAMPLE_TEST=m ...means we can simply "insmod example-test.ko" to run the tests. To achieve this we need to do the following: o export the required symbols in kunit o string-stream tests utilize non-exported symbols so for now we skip building them when CONFIG_KUNIT_TEST=m. o drivers/base/power/qos-test.c contains a few unexported interface references, namely freq_qos_read_value() and freq_constraints_init(). Both of these could be potentially defined as static inline functions in include/linux/pm_qos.h, but for now we simply avoid supporting module build for that test suite. o support a new way of declaring test suites. Because a module cannot do multiple late_initcall()s, we provide a kunit_test_suites() macro to declare multiple suites within the same module at once. o some test module names would have been too general ("test-test" and "example-test" for kunit tests, "inode-test" for ext4 tests); rename these as appropriate ("kunit-test", "kunit-example-test" and "ext4-inode-test" respectively). Also define kunit_test_suite() via kunit_test_suites() as callers in other trees may need the old definition. Co-developed-by: Knut Omang Signed-off-by: Knut Omang Signed-off-by: Alan Maguire Reviewed-by: Brendan Higgins Acked-by: Theodore Ts'o # for ext4 bits Acked-by: David Gow # For list-test Reported-by: kbuild test robot Signed-off-by: Shuah Khan

PM / Domains: Introduce a genpd OF helper that removes a subdomain

2020-01-02T15:52:40Z

We already have the of_genpd_add_subdomain() helper, but no corresponding of_genpd_remove_subdomain(), so let's add it. Subsequent changes starts to make use of it. Signed-off-by: Ulf Hansson Acked-by: Rafael J. Wysocki

PM: wakeup: Show statistics for deleted wakeup sources again

2019-12-20T09:02:38Z

After commit 00ee22c28915 (PM / wakeup: Use seq_open() to show wakeup stats), print_wakeup_source_stats(m, &deleted_ws) is not called from wakeup_sources_stats_seq_show() any more. Because deleted_ws is one of the wakeup sources, it should be shown too, so add it to the end of all other wakeup sources. Signed-off-by: zhuguangqing [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki