linux/drivers/base/power, branch v5.7

PM: sleep: core: Switch back to async_schedule_dev()

2020-04-22T14:36:18Z

Commit 8b9ec6b73277 ("PM core: Use new async_schedule_dev command") introduced a new function for better performance. However commit f2a424f6c613 ("PM / core: Introduce dpm_async_fn() helper") went back to the non-optimized version, async_schedule(). So switch back to the sync_schedule_dev() to improve performance Fixes: f2a424f6c613 ("PM / core: Introduce dpm_async_fn() helper") Signed-off-by: Kai-Heng Feng Signed-off-by: Rafael J. Wysocki

Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2020-04-06T17:14:39Z

Pull more power management updates from Rafael Wysocki: "Additional power management updates. These fix a corner-case suspend-to-idle wakeup issue on systems where the ACPI SCI is shared with another wakeup source, add a kernel command line option to set pm_debug_messages via the kernel command line, add a document desctibing system-wide suspend and resume code flows, modify cpufreq Kconfig to choose schedutil as the preferred governor by default in a couple of cases and do some assorted cleanups. Specifics: - Fix corner-case suspend-to-idle wakeup issue on systems where the ACPI SCI is shared with another wakeup source (Hans de Goede). - Add document describing system-wide suspend and resume code flows to the admin guide (Rafael Wysocki). - Add kernel command line option to set pm_debug_messages (Chen Yu). - Choose schedutil as the preferred scaling governor by default on ARM big.LITTLE systems and on x86 systems using the intel_pstate driver in the passive mode (Linus Walleij, Rafael Wysocki). - Drop racy and redundant checks from the PM core's device_prepare() routine (Rafael Wysocki). - Make resume from hibernation take the hibernation_restore() return value into account (Dexuan Cui)" * tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler() ACPI: PM: Add acpi_[un]register_wakeup_handler() Documentation: PM: sleep: Document system-wide suspend code flows cpufreq: Select schedutil when using big.LITTLE PM: sleep: Add pm_debug_messages kernel command line option PM: sleep: core: Drop racy and redundant checks from device_prepare() PM: hibernate: Propagate the return value of hibernation_restore() cpufreq: intel_pstate: Select schedutil as the default governor

PM: sleep: core: Drop racy and redundant checks from device_prepare()

2020-04-01T09:38:49Z

Alan Stern points out that the WARN_ON() check in device_prepare() is racy (because the PM-runtime API can be disabled briefly for any device at any time and system suspend can start at any time too) and the pm_runtime_suspended() check in the computation of the direct_complete flag value is redundant (because it will be repeated later anyway). Drop both these checks accordingly. Reported-by: Alan Stern Signed-off-by: Rafael J. Wysocki

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-04-01T00:29:33Z

Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...

Merge branches 'pm-core', 'pm-sleep', 'pm-acpi' and 'pm-domains'

2020-03-30T12:46:58Z

* pm-core: PM: runtime: Add pm_runtime_get_if_active() * pm-sleep: PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer PM: sleep: wakeup: Use built-in RCU list checking PM: sleep: core: Use built-in RCU list checking * pm-acpi: ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() * pm-domains: cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing

PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there

2020-03-25T10:15:55Z

Skip wakeup_source_sysfs_remove() to fix a NULL pinter dereference via ws->dev, if the wakeup source is unregistered before registering the wakeup class from device_add(). Fixes: 2ca3d1ecb8c4 ("PM / wakeup: Register wakeup class kobj after device is added") Signed-off-by: Neeraj Upadhyay Cc: 5.4+ # 5.4+ [ rjw: Subject & changelog, white space ] Signed-off-by: Rafael J. Wysocki

PM / Domains: Allow no domain-idle-states DT property in genpd when parsing

2020-03-14T11:03:05Z

Commit 2c361684803e ("PM / Domains: Don't treat zero found compatible idle states as an error"), moved of_genpd_parse_idle_states() towards allowing none compatible idle state to be found for the device node, rather than returning an error code. However, it didn't consider that the "domain-idle-states" DT property may be missing as it's optional, which makes of_count_phandle_with_args() to return -ENOENT. Let's fix this to make the behaviour consistent. Fixes: 2c361684803e ("PM / Domains: Don't treat zero found compatible idle states as an error") Reported-by: Benjamin Gaignard Cc: 4.20+ # 4.20+ Reviewed-by: Sudeep Holla Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM: sleep: wakeup: Use built-in RCU list checking

2020-03-04T10:05:59Z

Pass cond argument to list_for_each_entry_rcu() to fix the following false positive lockdep warning and other uses of list_for_each_entry_rcu() in wakeup.c. (CONFIG_PROVE_RCU_LIST = y) [ 331.934648] ============================= [ 331.934650] WARNING: suspicious RCU usage [ 331.934653] 5.6.0-rc1+ #5 Not tainted [ 331.934655] ----------------------------- [ 331.934657] drivers/base/power/wakeup.c:408 RCU-list traversed in non-reader section!! [ 333.025156] ============================= [ 333.025161] WARNING: suspicious RCU usage [ 333.025168] 5.6.0-rc1+ #5 Not tainted [ 333.025173] ----------------------------- [ 333.025180] drivers/base/power/wakeup.c:424 RCU-list traversed in non-reader section!! Signed-off-by: Madhuparna Bhowmik Signed-off-by: Rafael J. Wysocki

PM: sleep: core: Use built-in RCU list checking

2020-03-04T10:05:59Z

This patch passes the cond argument to list_for_each_entry_rcu() to fix the following false-positive lockdep warnings: (with CONFIG_PROVE_RCU_LIST = y) [ 330.302784] ============================= [ 330.302789] WARNING: suspicious RCU usage [ 330.302796] 5.6.0-rc1+ #5 Not tainted [ 330.302801] ----------------------------- [ 330.302808] drivers/base/power/main.c:326 RCU-list traversed in non-reader section!! [ 330.303303] ============================= [ 330.303307] WARNING: suspicious RCU usage [ 330.303311] 5.6.0-rc1+ #5 Not tainted [ 330.303315] ----------------------------- [ 330.303319] drivers/base/power/main.c:1698 RCU-list traversed in non-reader section!! [ 331.934969] ============================= [ 331.934971] WARNING: suspicious RCU usage [ 331.934973] 5.6.0-rc1+ #5 Not tainted [ 331.934975] ----------------------------- [ 331.934977] drivers/base/power/main.c:1238 RCU-list traversed in non-reader section!! [ 332.467772] WARNING: suspicious RCU usage [ 332.467775] 5.6.0-rc1+ #5 Not tainted [ 332.467775] ----------------------------- [ 332.467778] drivers/base/power/main.c:269 RCU-list traversed in non-reader section!! Signed-off-by: Madhuparna Bhowmik Signed-off-by: Rafael J. Wysocki

PM: runtime: Add pm_runtime_get_if_active()

2020-03-04T10:01:18Z

pm_runtime_get_if_in_use() bumps up the PM-runtime usage count if it is not equal to zero and the device's PM-runtime status is 'active'. This works for drivers that do not use autoidle, but for those that do, the function returns zero even when the device is active. In order to maintain sane device state while the device is powered on in the hope that it'll be needed, pm_runtime_get_if_active(dev, true) returns a positive value if the device's PM-runtime status is 'active' when it is called, in which case it also increments the device's usage count. If the second argument of pm_runtime_get_if_active() is 'false', the function behaves just like pm_runtime_get_if_in_use(), so redefine the latter as a wrapper around the former. Signed-off-by: Sakari Ailus [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki