linux/drivers/base/regmap, branch v5.11

regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()

2021-01-05T14:34:41Z

This code will leak "map->debugfs_name" because the if statement is reversed so it only frees NULL pointers instead of non-NULL. In fact the if statement is not required and should just be removed because kfree() accepts NULL pointers. Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda Signed-off-by: Mark Brown

regmap: debugfs: Fix a memory leak when calling regmap_attach_dev

2020-12-29T13:17:33Z

After initializing the regmap through syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the device, because the debugfs_name has been allocated, there is no need to redistribute it again unreferenced object 0xd8399b80 (size 64): comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s) hex dump (first 32 bytes): 64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72 dummy-iomuxc-gpr 40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69 @20e4000..R[.~Bi backtrace: [] kasprintf+0x2c/0x54 [<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc [] __regmap_init+0xc38/0xd88 [<1f7e0609>] of_syscon_register+0x168/0x294 [<735e8766>] device_node_get_regmap+0x6c/0x98 [] imx6ul_init_machine+0x20/0x88 [<0456565b>] customize_machine+0x1c/0x30 [] do_one_initcall+0x80/0x3ac [<7e584867>] kernel_init_freeable+0x170/0x1f0 [<80074741>] kernel_init+0x8/0x120 [<285d6f28>] ret_from_fork+0x14/0x20 [<00000000>] 0x0 Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device") Signed-off-by: Xiaolei Wang Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com Signed-off-by: Mark Brown

Merge tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

2020-12-15T23:34:38Z

Pull regmap updates from Mark Brown: "This is quite a busy release for regmap with two substantial features being added: - Support for register maps Soundwire 1.2 multi-byte operations, allowing atomic support for registers larger than a single byte. - Support for relaxed I/O without barriers in MMIO regmaps, allowing them to be used efficiently on systems where default MMIO operations include barriers. There was also an addition and revert of use of the new Soundwire support for RT715 due to build issues with the driver built in, my tests only covered building it as a module, the patch wasn't just dropped as it had already been merged elsewhere" * tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: ASoC: rt715: Fix build regmap: sdw: add required header files regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event regmap: Fix order of regmap write log regmap: mmio: add config option to allow relaxed MMIO accesses

Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-12-15T23:03:31Z

Pull irq updates from Thomas Gleixner: "Generic interrupt and irqchips subsystem updates. Unusually, there is not a single completely new irq chip driver, just new DT bindings and extensions of existing drivers to accomodate new variants! Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups" * tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling driver core: platform: Add devm_platform_get_irqs_affinity() ACPI: Drop acpi_dev_irqresource_disabled() resource: Add irqresource_disabled() genirq/affinity: Add irq_update_affinity_desc() irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device platform-msi: Track shared domain allocation irqchip/ti-sci-intr: Fix freeing of irqs irqchip/ti-sci-inta: Fix printing of inta id on probe success drivers/irqchip: Remove EZChip NPS interrupt controller Revert "genirq: Add fasteoi IPI flow" irqchip/hip04: Make IPIs use handle_percpu_devid_irq() irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq() irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq() irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq() irqchip/ocelot: Add support for Jaguar2 platforms irqchip/ocelot: Add support for Serval platforms irqchip/ocelot: Add support for Luton platforms irqchip/ocelot: prepare to support more SoC ...

Merge remote-tracking branch 'regmap/for-5.11' into regmap-next

2020-11-30T18:16:06Z

Merge series "regmap/SoundWire/ASoC: Add SoundWire SDCA support" from Bard Liao :

2020-11-26T20:03:02Z

The MIPI SoundWire Device Class standard will define audio functionality beyond the scope of the existing SoundWire 1.2 standard, which is limited to the bus and interface. The description is inspired by the USB Audio Class, with "functions", "entities", "control selectors", "audio clusters". The main difference with the USB Audio class is that the devices are typically on a motherboard and descriptors stored in platform firmware instead of being retrieved from the device. The current set of devices managed in this patchset are conformant with the SDCA 0.6 specification and require dedicated drivers since the descriptors and platform firmware specification is not complete at this time. They do however rely on the hierarchical addressing required by the SDCA standard. Future devices conformant with SDCA 1.0 should rely on a class driver. This series adds support for the hierarchical SDCA addressing and extends regmap. It then provides 3 codecs for RT711-sdca headset codec, RT1316 amplifier and RT715-scda microphone codec. Note that the release of this code before the formal adoption of the SDCA 1.0 specification was formally endorsed by the MIPI Board to make sure there is no delay for Linux-based support of this specification. Jack Yu (1): ASoC/SoundWire: rt715-sdca: First version of rt715 sdw sdca codec driver Pierre-Louis Bossart (2): soundwire: SDCA: add helper macro to access controls regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ Shuming Fan (2): ASoC/SoundWire: rt1316: Add RT1316 SDCA vendor-specific driver ASoC/SoundWire: rt711-sdca: Add RT711 SDCA vendor-specific driver drivers/base/regmap/Kconfig | 6 +- drivers/base/regmap/Makefile | 1 + drivers/base/regmap/regmap-sdw-mbq.c | 101 ++ include/linux/regmap.h | 35 + include/linux/soundwire/sdw_registers.h | 32 + sound/soc/codecs/Kconfig | 20 + sound/soc/codecs/Makefile | 6 + sound/soc/codecs/rt1316-sdw.c | 756 ++++++++++++ sound/soc/codecs/rt1316-sdw.h | 115 ++ sound/soc/codecs/rt711-sdca-sdw.c | 424 +++++++ sound/soc/codecs/rt711-sdca-sdw.h | 101 ++ sound/soc/codecs/rt711-sdca.c | 1481 +++++++++++++++++++++++ sound/soc/codecs/rt711-sdca.h | 246 ++++ sound/soc/codecs/rt715-sdca-sdw.c | 278 +++++ sound/soc/codecs/rt715-sdca-sdw.h | 170 +++ sound/soc/codecs/rt715-sdca.c | 936 ++++++++++++++ sound/soc/codecs/rt715-sdca.h | 124 ++ 17 files changed, 4831 insertions(+), 1 deletion(-) create mode 100644 drivers/base/regmap/regmap-sdw-mbq.c create mode 100644 sound/soc/codecs/rt1316-sdw.c create mode 100644 sound/soc/codecs/rt1316-sdw.h create mode 100644 sound/soc/codecs/rt711-sdca-sdw.c create mode 100644 sound/soc/codecs/rt711-sdca-sdw.h create mode 100644 sound/soc/codecs/rt711-sdca.c create mode 100644 sound/soc/codecs/rt711-sdca.h create mode 100644 sound/soc/codecs/rt715-sdca-sdw.c create mode 100644 sound/soc/codecs/rt715-sdca-sdw.h create mode 100644 sound/soc/codecs/rt715-sdca.c create mode 100644 sound/soc/codecs/rt715-sdca.h base-commit: 3650b228f83adda7e5ee532e2b90429c03f7b9ec -- 2.17.1

regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ

2020-11-26T13:19:59Z

The SoundWire 1.1 specification only allowed for reads and writes of bytes. The SoundWire 1.2 specification adds a new capability to transfer "Multi-Byte Quantities" (MBQ) across the bus. The transfers still happens one-byte-at-a-time, but the update is atomic. For example when writing a 16-bit volume, the first byte transferred is only taken into account when the second byte is successfully transferred. The mechanism is symmetrical for read and writes: - On a read, the address of the last byte to be read is modified by setting the MBQ bit - On a write, the address of all but the last byte to be written are modified by setting the MBQ bit. The address for the last byte relies on the MBQ bit being cleared. The current definitions for MBQ-based controls in the SDCA draft standard are limited to 16 bits for volumes, so for now this is the only supported format. An update will be provided if and when support for 24-bit and 32-bit values is specified by the SDCA standard. One possible objection is that this code could have been handled with regmap-sdw.c. However this is a new spec addition not handled by every SoundWire 1.1 and non-SDCA device, so there's no reason to load code that will never be used. Also in practice it's extremely unlikely that CONFIG_REGMAP would not be selected with CONFIG_REGMAP_MBQ selected. However there's no functional dependency between the two modules so they can be selected separately. Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Reviewed-by: Kai Vehmanen Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20201103172226.4278-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown

regmap: sdw: add required header files

2020-11-26T13:08:14Z

Explicitly add header files used by regmap SoundWire support. Suggested-by: Guennadi Liakhovetski Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Reviewed-by: Kai Vehmanen Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20201125130128.15952-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown

regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event

2020-11-24T14:14:00Z

I have an error saying that `regcache_sync` has 2 fields named `type` while using libtraceevent. Erase the `int field` type, which is not assigned. This field is introduced by mistake and this commit removes it. Fixes: 593600890110c ("regmap: Add the regcache_sync trace event") Signed-off-by: Philippe Duplessis-Guindon Link: https://lore.kernel.org/r/20201124135730.9185-1-pduplessis@efficios.com Signed-off-by: Mark Brown

regmap: Fix order of regmap write log

2020-11-12T16:05:17Z

_regmap_write can trigger a _regmap_select_page, which will call another _regmap_write that will be executed first, but the log shows the inverse order Also, keep consistency with _regmap_read which only logs in case of success Signed-off-by: Lucas Tanure Reviewed-by: Charles Keepax Link: https://lore.kernel.org/r/20201112150217.459844-1-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown