regmap: spi-avmm: Fix regmap_bus max_raw_write

2023-06-20T20:31:08Z

The max_raw_write member of the regmap_spi_avmm_bus structure is defined as: .max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT SPI_AVMM_VAL_SIZE == 4 and MAX_WRITE_CNT == 1 so this results in a maximum write transfer size of 4 bytes which provides only enough space to transfer the address of the target register. It provides no space for the value to be transferred. This bug became an issue (divide-by-zero in _regmap_raw_write()) after the following was accepted into mainline: commit 3981514180c9 ("regmap: Account for register length when chunking") Change max_raw_write to include space (4 additional bytes) for both the register address and value: .max_raw_write = SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT Fixes: 7f9fb67358a2 ("regmap: add Intel SPI Slave to AVMM Bus Bridge support") Reviewed-by: Matthew Gerlach Signed-off-by: Russ Weight Link: https://lore.kernel.org/r/20230620202824.380313-1-russell.h.weight@intel.com Signed-off-by: Mark Brown

regmap: regcache: Don't sync read-only registers

2023-06-13T12:15:00Z

regcache_maple_sync() tries to sync all cached values no matter whether it's writable or not. OTOH, regache_sync_val() does care the wrtability and returns -EIO for a read-only register. This results in an error message like: snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x2f0009. -5 and the sync loop is aborted incompletely. This patch adds the writable register check to regcache_sync_val() for addressing the bug above. Note that, although we may add the check in the caller side (regcache_maple_sync()), here we put in regcache_sync_val(), so that a similar case like this can be avoided in future. Fixes: f033c26de5a5 ("regmap: Add maple tree based register cache") Link: https://lore.kernel.org/r/877cs7g6f1.wl-tiwai@suse.de Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20230613112240.3361-1-tiwai@suse.de Signed-off-by: Mark Brown

regmap: maple: Drop the RCU read lock while syncing registers

2023-05-24T10:21:52Z

Unfortunately the maple tree requires us to explicitly lock it so we need to take the RCU read lock while iterating. When syncing this means that we end up trying to write out register values while holding the RCU read lock which triggers lockdep issues since that is an atomic context but most buses can't be used in atomic context. Pause the iteration and drop the lock for each register we check to avoid this. Reported-by: Pierre-Louis Bossart Tested-by: Pierre-Louis Bossart Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20230523-regcache-maple-sync-lock-v1-1-530e4d68dfab@kernel.org Signed-off-by: Mark Brown

regmap: sdw: check for invalid multi-register writes config

2023-05-24T10:21:51Z

SoundWire code as it is only supports Bulk register writes and it does not support multi-register writes. Any drivers that set can_multi_write and use regmap_multi_reg_write() will easily endup with programming the hardware incorrectly without any errors. So, add this check in bus code to be able to validate the drivers config. Fixes: 522272047dc6 ("regmap: sdw: Remove 8-bit value size restriction") Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20230523154747.5429-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown

regmap: Account for register length when chunking

2023-05-18T01:53:42Z

Currently, when regmap_raw_write() splits the data, it uses the max_raw_write value defined for the bus. For any bus that includes the target register address in the max_raw_write value, the chunked transmission will always exceed the maximum transmission length. To avoid this problem, subtract the length of the register and the padding from the maximum transmission. Signed-off-by: Jim Wylder

regmap: REGMAP_KUNIT should not select REGMAP

2023-05-08T00:07:51Z

Enabling a (modular) test should not silently enable additional kernel functionality, as that may increase the attack vector of a product. Fix this by: 1. making REGMAP visible if CONFIG_KUNIT_ALL_TESTS is enabled, 2. making REGMAP_KUNIT depend on REGMAP instead of selecting it. After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build modules for all appropriate tests for ones system, without pulling in extra unwanted functionality, while still allowing a tester to manually enable REGMAP and its test suite on a system where REGMAP is not enabled by default. Fixes: 2238959b6ad27040 ("regmap: Add some basic kunit tests") Signed-off-by: Geert Uytterhoeven

Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2023-04-28T02:42:02Z

Pull MM updates from Andrew Morton: - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of switching from a user process to a kernel thread. - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav. - zsmalloc performance improvements from Sergey Senozhatsky. - Yue Zhao has found and fixed some data race issues around the alteration of memcg userspace tunables. - VFS rationalizations from Christoph Hellwig: - removal of most of the callers of write_one_page() - make __filemap_get_folio()'s return value more useful - Luis Chamberlain has changed tmpfs so it no longer requires swap backing. Use `mount -o noswap'. - Qi Zheng has made the slab shrinkers operate locklessly, providing some scalability benefits. - Keith Busch has improved dmapool's performance, making part of its operations O(1) rather than O(n). - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd, permitting userspace to wr-protect anon memory unpopulated ptes. - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather than exclusive, and has fixed a bunch of errors which were caused by its unintuitive meaning. - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature, which causes minor faults to install a write-protected pte. - Vlastimil Babka has done some maintenance work on vma_merge(): cleanups to the kernel code and improvements to our userspace test harness. - Cleanups to do_fault_around() by Lorenzo Stoakes. - Mike Rapoport has moved a lot of initialization code out of various mm/ files and into mm/mm_init.c. - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for DRM, but DRM doesn't use it any more. - Lorenzo has also coverted read_kcore() and vread() to use iterators and has thereby removed the use of bounce buffers in some cases. - Lorenzo has also contributed further cleanups of vma_merge(). - Chaitanya Prakash provides some fixes to the mmap selftesting code. - Matthew Wilcox changes xfs and afs so they no longer take sleeping locks in ->map_page(), a step towards RCUification of pagefaults. - Suren Baghdasaryan has improved mmap_lock scalability by switching to per-VMA locking. - Frederic Weisbecker has reworked the percpu cache draining so that it no longer causes latency glitches on cpu isolated workloads. - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig logic. - Liu Shixin has changed zswap's initialization so we no longer waste a chunk of memory if zswap is not being used. - Yosry Ahmed has improved the performance of memcg statistics flushing. - David Stevens has fixed several issues involving khugepaged, userfaultfd and shmem. - Christoph Hellwig has provided some cleanup work to zram's IO-related code paths. - David Hildenbrand has fixed up some issues in the selftest code's testing of our pte state changing. - Pankaj Raghav has made page_endio() unneeded and has removed it. - Peter Xu contributed some rationalizations of the userfaultfd selftests. - Yosry Ahmed has fixed an issue around memcg's page recalim accounting. - Chaitanya Prakash has fixed some arm-related issues in the selftests/mm code. - Longlong Xia has improved the way in which KSM handles hwpoisoned pages. - Peter Xu fixes a few issues with uffd-wp at fork() time. - Stefan Roesch has changed KSM so that it may now be used on a per-process and per-cgroup basis. * tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm,unmap: avoid flushing TLB in batch if PTE is inaccessible shmem: restrict noswap option to initial user namespace mm/khugepaged: fix conflicting mods to collapse_file() sparse: remove unnecessary 0 values from rc mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area() hugetlb: pte_alloc_huge() to replace huge pte_alloc_map() maple_tree: fix allocation in mas_sparse_area() mm: do not increment pgfault stats when page fault handler retries zsmalloc: allow only one active pool compaction context selftests/mm: add new selftests for KSM mm: add new KSM process and sysfs knobs mm: add new api to enable ksm per process mm: shrinkers: fix debugfs file permissions mm: don't check VMA write permissions if the PTE/PMD indicates write permissions migrate_pages_batch: fix statistics for longterm pin retry userfaultfd: use helper function range_in_vma() lib/show_mem.c: use for_each_populated_zone() simplify code mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list() fs/buffer: convert create_page_buffers to folio_create_buffers fs/buffer: add folio_create_empty_buffers helper ...

regmap: allow upshifting register addresses before performing operations

2023-04-07T16:28:19Z

Similar to the existing reg_downshift mechanism, that is used to translate register addresses on busses that have a smaller address stride, it's also possible to want to upshift register addresses. Such a case was encountered when network PHYs and PCS that usually sit on a MDIO bus (16-bits register with a stride of 1) are integrated directly as memory-mapped devices. Here, the same register layout defined in 802.3 is used, but the register now have a larger stride. Introduce a mechanism to also allow upshifting register addresses. Re-purpose reg_downshift into a more generic, signed reg_shift, whose sign indicates the direction of the shift. To avoid confusion, also introduce macros to explicitly indicate if we want to downshift or upshift. For bisectability, change any use of reg_downshift to use reg_shift. Signed-off-by: Maxime Chevallier Tested-by: Colin Foster Link: https://lore.kernel.org/r/20230407152604.105467-1-maxime.chevallier@bootlin.com Signed-off-by: Mark Brown

mm, treewide: redefine MAX_ORDER sanely

2023-04-06T02:42:46Z

MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov Reviewed-by: Michael Ellerman [powerpc] Cc: "Kirill A. Shutemov" Cc: Zi Yan Signed-off-by: Andrew Morton

Migrate the PCIe-IDIO-24 and WS16C48 GPIO drivers

2023-04-05T20:56:44Z

Merge series from William Breathitt Gray : The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. A patch to pass irq_drv_data as a parameter for struct regmap_irq_chip set_type_config() is included. This is needed by the idio_24_set_type_config() and ws16c48_set_type_config() callbacks in order to update the type configuration on their respective devices.

linux/drivers/base/regmap, branch v6.4