linux/drivers/base, branch v3.17

Merge tag 'regmap-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

2014-09-15T23:20:56Z

Pull regmap fix from Mark Brown: "Fix registers file in debugfs Ensure that the mode reported for the registers file in debugfs is accurate by marking it as read only when the define to enable writes has not been set. This is on the edge of being a bug fix but it's debugfs and it makes it much easier for users to spot what's going wrong when they forget to enable writeability" * tag 'regmap-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix debugfs-file 'registers' mode

regmap: Fix debugfs-file 'registers' mode

2014-09-08T11:16:19Z

The macro "REGMAP_ALLOW_WRITE_DEBUGFS" can be used to enable write support on the registers file in the debugfs. The mode of the file is fixed to 0400 so it is not possible to write the file ever. This patch fixes the mode by setting it to the correct value depending on the macro. Signed-off-by: Markus Pargmann Signed-off-by: Mark Brown

Merge remote-tracking branches 'regmap/fix/cache', 'regmap/fix/debugfs' and 'regmap/fix/volatile' into regmap-linus

2014-08-31T12:23:45Z

regmap: Don't attempt block writes when syncing cache on single_rw devices

2014-08-31T12:22:37Z

If the device can't support block writes then don't attempt to use raw syncing which will automatically generate block writes for adjacent registers, use the existing _single() block syncing implementation. Reported-by: Jarkko Nikula Tested-by: Jarkko Nikula Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

regmap: Fix handling of volatile registers for format_write() chips

2014-08-26T17:34:26Z

A previous over-zealous factorisation of code means that we only treat registers as volatile if they are readable. For most devices this is fine since normally most registers can be read and volatility implies readability but for format_write() devices where there is no readback from the hardware and we use volatility to mean simply uncacheability this means that we end up treating all registers as cacheble. A bigger refactoring of the code to clarify this is in order but as a fix make a minimal change and only check readability when checking volatility if there is no format_write() operation defined for the device. Signed-off-by: Mark Brown Tested-by: Lars-Peter Clausen Cc: stable@vger.kernel.org

regmap: Fix regcache debugfs initialization

2014-08-26T08:11:56Z

Commit 6cfec04bcc05 ("regmap: Separate regmap dev initialization") moved the regmap debugfs initialization after regcache initialization. This means that the regmap debugfs directory is not created yet when the cache initialization runs and so any debugfs files registered by the regcache are created in the debugfs root directory rather than the debugfs directory of the regmap instance. Fix this by adding a separate callback for the regcache debugfs initialization which will be called after the parent debugfs entry has been created. Fixes: 6cfec04bcc05 (regmap: Separate regmap dev initialization) Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

Merge branch 'akpm' (patchbomb from Andrew Morton)

2014-08-07T04:14:42Z

Merge incoming from Andrew Morton: - Various misc things. - arch/sh updates. - Part of ocfs2. Review is slow. - Slab updates. - Most of -mm. - printk updates. - lib/ updates. - checkpatch updates. * emailed patches from Andrew Morton : (226 commits) checkpatch: update $declaration_macros, add uninitialized_var checkpatch: warn on missing spaces in broken up quoted checkpatch: fix false positives for --strict "space after cast" test checkpatch: fix false positive MISSING_BREAK warnings with --file checkpatch: add test for native c90 types in unusual order checkpatch: add signed generic types checkpatch: add short int to c variable types checkpatch: add for_each tests to indentation and brace tests checkpatch: fix brace style misuses of else and while checkpatch: add --fix option for a couple OPEN_BRACE misuses checkpatch: use the correct indentation for which() checkpatch: add fix_insert_line and fix_delete_line helpers checkpatch: add ability to insert and delete lines to patch/file checkpatch: add an index variable for fixed lines checkpatch: warn on break after goto or return with same tab indentation checkpatch: emit a warning on file add/move/delete checkpatch: add test for commit id formatting style in commit log checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings checkpatch: improve "no space after cast" test checkpatch: allow multiple const * types ...

Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2014-08-07T03:34:19Z

Pull ACPI and power management updates from Rafael Wysocki: "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18 commits) and system suspend/hibernation (9 commits). From the new code perspective, the ACPICA update brings ACPI 5.1 to the table, including a new device configuration object called _DSD (Device Specific Data) that will hopefully help us to operate device properties like Device Trees do (at least to some extent) and changes related to supporting ACPI on ARM. Apart from that we have hibernation changes making it use radix trees to store memory bitmaps which should speed up some operations carried out by it quite significantly. We also have some power management changes related to suspend-to-idle (the "freeze" sleep state) support and more preliminary changes needed to support ACPI on ARM (outside of ACPICA). The rest is fixes and cleanups pretty much everywhere. Specifics: - ACPICA update to upstream version 20140724. That includes ACPI 5.1 material (support for the _CCA and _DSD predefined names, changes related to the DMAR and PCCT tables and ARM support among other things) and cleanups related to using ACPICA's header files. A major part of it is related to acpidump and the core code used by that utility. Changes from Bob Moore, David E Box, Lv Zheng, Sascha Wildner, Tomasz Nowicki, Hanjun Guo. - Radix trees for memory bitmaps used by the hibernation core from Joerg Roedel. - Support for waking up the system from suspend-to-idle (also known as the "freeze" sleep state) using ACPI-based PCI wakeup signaling (Rafael J Wysocki). - Fixes for issues related to ACPI button events (Rafael J Wysocki). - New device ID for an ACPI-enumerated device included into the Wildcat Point PCH from Jie Yang. - ACPI video updates related to backlight handling from Hans de Goede and Linus Torvalds. - Preliminary changes needed to support ACPI on ARM from Hanjun Guo and Graeme Gregory. - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui. - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros (Rafael J Wysocki). - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J Wysocki. - Cleanups and improvements related to system suspend from Lan Tianyu, Randy Dunlap and Rafael J Wysocki. - ACPI battery cleanup from Wei Yongjun. - cpufreq core fixes from Viresh Kumar. - Elimination of a deadband effect from the cpufreq ondemand governor and intel_pstate driver cleanups from Stratos Karafotis. - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas Patocka. - Fix for the imx6 cpufreq driver from Anson Huang. - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep Tripathy and Mohammad Merajul Islam Molla. - Build fix for the big_little cpuidle driver from Sachin Kamat. - Configuration fix for the Operation Performance Points (OPP) framework from Mark Brown. - APM cleanup from Jean Delvare. - cpupower utility fixes and cleanups from Peter Senna Tschudin, Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger" * tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits) ACPI / LPSS: add LPSS device for Wildcat Point PCH ACPI / PNP: Replace faulty is_hex_digit() by isxdigit() ACPICA: Update version to 20140724. ACPICA: ACPI 5.1: Update for PCCT table changes. ACPICA/ARM: ACPI 5.1: Update for GTDT table changes. ACPICA/ARM: ACPI 5.1: Update for MADT changes. ACPICA/ARM: ACPI 5.1: Update for FADT changes. ACPICA: ACPI 5.1: Support for the _CCA predifined name. ACPICA: ACPI 5.1: New notify value for System Affinity Update. ACPICA: ACPI 5.1: Support for the _DSD predefined name. ACPICA: Debug object: Add current value of Timer() to debug line prefix. ACPICA: acpihelp: Add UUID support, restructure some existing files. ACPICA: Utilities: Fix local printf issue. ACPICA: Tables: Update for DMAR table changes. ACPICA: Remove some extraneous printf arguments. ACPICA: Update for comments/formatting. No functional changes. ACPICA: Disassembler: Add support for the ToUUID opererator (macro). ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro. ACPICA: Work around an ancient GCC bug. ACPI / processor: Make it possible to get local x2apic id via _MAT ...

mm: export NR_SHMEM via sysinfo(2) / si_meminfo() interfaces

2014-08-07T01:01:19Z

Historically, we exported shared pages to userspace via sysinfo(2) sharedram and /proc/meminfo's "MemShared" fields. With the advent of tmpfs, from kernel v2.4 onward, that old way for accounting shared mem was deemed inaccurate and we started to export a hard-coded 0 for sysinfo.sharedram. Later on, during the 2.6 timeframe, "MemShared" got re-introduced to /proc/meminfo re-branded as "Shmem", but we're still reporting sysinfo.sharedmem as that old hard-coded zero, which makes the "shared memory" report inconsistent across interfaces. This patch leverages the addition of explicit accounting for pages used by shmem/tmpfs -- "4b02108 mm: oom analysis: add shmem vmstat" -- in order to make the users of sysinfo(2) and si_meminfo*() friends aware of that vmstat entry and make them report it consistently across the interfaces, as well to make sysinfo(2) returned data consistent with our current API documentation states. Signed-off-by: Rafael Aquini Acked-by: Rik van Riel Cc: Mel Gorman Cc: Johannes Weiner Cc: KOSAKI Motohiro Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/mem-hotplug: replace simple_strtoull() with kstrtoull()

2014-08-07T01:01:18Z

Use the newer and more pleasant kstrtoull() to replace simple_strtoull(), because simple_strtoull() is marked for obsoletion. Signed-off-by: Zhang Zhen Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds